Faymonville G-module vessel deck

Faymonville G-Modul Vesseldeck

Condition: reconditioned (used), K.H.D. Calibrator 1300H . Without frame . Hedpfxovt Su Io Alwsu With hydraulic-unit, electric motor and Voith Turbo coupling . With new cone and shell . Overhauled, sandblasted and painted .

Year of construction: 2014, condition: repair required (used), functionality: fully functional, The machine has been idle unused for a few years now, so it needs maintenance before commissioning, which should be the responsibility of the buyer. Hjdpfx Ajtu U Ebjlweu

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Hsdpfxoqmi Ire Alwsu Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: SY008CE0693K8, Year of manufacture: 2024 Engine power: 73 hp (53.7 kW) Operating weight approx. 8,800 kg Yanmar engine, Stage V, approx. 73 hp, 202 Nm, 3,319 cc Load sensing hydraulics, max. 185 l/min 1st proportional auxiliary control circuit for GRL/hammer on joystick 1 2nd proportional auxiliary control circuit for grapple on joystick 2 Safety lift valves for stick and boom with overload indicator Double-acting quick coupler hydraulic circuit Swing brake 2 travel speeds Cylinder protection on the boom Bucket breakout force ISO 56 kN Stick tear-out force ISO 38 kN ROPS cab Adjustable boom, dipper stick 2,050 mm Dozer blade Hedpfx Aev Nix Aslwju Rubber tracks 450 mm Battery main switch Travel alarm and Rotating beacon Emergency engine stop switch 2 LED headlights on the roof 1 LED headlight on the boom 12V connection Document compartment Radio with speaker

Condition: new, empty load weight: 15,420 kg, maximum load weight: 61,080 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 900 mm, tire size: 235/75/r17,5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform: Loading area in extendable design with rear bevel of approx. 500 mm x 8° 8 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 50,000 kg. Seat posts: - JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Axles and tires: BPW axles and suspension, 4th + 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lock via reverse gear and manual activation Tires 235/75 R 17.5 3PMSF Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Paint finish: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the bulkhead 2" kingpin One galvanized steel bulkhead approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 2 restraining shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights A bracket for a rotating beacon at the rear of the trailer Galvanized supports under the bevel of the loading area White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear Electro-hydraulic unit at the rear under the cargo bed A holder for the warning signs, including a socket, on the gooseneck and on the rear panel on the left and right respectively Control valves for the ramps mounted on the right-hand side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm (LxH) The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or a 40' container 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Galvanized extensions, extendable by approx. 230 mm per side Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope On the chequer plates, above the kingpin and the load floor Hodpfx Alol Sl Izsweu

Year of construction: 2025, condition: new, functionality: fully functional, The ASCO® SD COMPACT screening drum is constructed from a robust, foldable structure and is a semi-mobile machine. The screening drum is used for screening coarse materials such as soil, gravel, wood chips, various waste, and chip bundles, making it ideal for the recycling industry. The screening drum can also be upgraded with a bunker and an extension. This creates a system with a bunker belt that can be operated in both directions, is quickly interchangeable, and features fully electric control. Hjdpfx Asr Akndolwju In conjunction with the extension, we gain additional screening area and the option of a third fraction. It's worth mentioning that the drum can be changed on both the screening drum and the extension. There are seven different drums available for the screening drum and four different drums for the extension. Technical Specifications: - Drum length: 2.1 m - Usable drum length: 1.7 m - Drum outer diameter: 1.3 m - Usable screening area: 7 m² - Bucket width: 2.3 m - System capacity: 20 - 50 t/h - Mesh size: Ø6 - Ø100 mm - Hopper opening: 2.24 x 0.85 m - Speed (adjustable): 5 - 20 rpm - Drive power: 400V / 5.5 kW (optional 7.5 kW) - Filling height: 2.55 m - Weight: 1500 kg - Length: 3.34 m - Width: 2.36 m - Height: 1.95 or 2.92 m (with support) Options: - Vibration motors for emptying the hopper - Drum rotation in both directions - Six different drum variants - Cleaning brush - Easy drum replacement - Two-wheel drive - Hour meter

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 12428 B500-851, Overheadcrane ± 14.170 mm x 25.000 kg Hedpjv Ip Afefx Alwju

Condition: new, power: 26 kW (35.35 HP), color: yellow, Carrying capacity: 1.000 kg Hedpfxjx S R Hfj Alwsu

Year of construction: 1998, condition: good (used), functionality: fully functional, machine/vehicle number: 12254 B521 860, Overheadcrane ± 10.500 mm x 12.500 kg Hodov Ip Egopfx Alwsu

Year of construction: 2022, operating hours: 2,500 h, condition: like new (used), functionality: fully functional, Waste Recovery and Sorting Line – Year 2022 Complete line for the recovery and sorting of municipal and industrial waste, manufactured and installed in 2022, with very few operating hours and in very good overall condition. The installation is equipped with leading European brands, including: • PICVISA – ECOPACK EP-2000 and EP-1500 optical separators • NIHOT – WSF 800 and SDS 800 air density separation systems • SPALECK – Vibratory screen • GUNTER – SPLITTER UNIT 425 screening and separation • SPR – 1-rotor Pre-crusher shredder • FELEMAMG – Magnetic and inductive separators • ATLAS COPCO – GA37 VSD FF compressor Hjdpfx Ajy Snntelwsu • Large number of conveyor belts and feeding/storage silos Approximate operating hours range from 1,000 to 2,500 per unit, with the majority of components maintaining excellent operational condition. The facility can be purchased: • As a complete line, • As separate sections, • As individual units. This is a modern facility, equipped with high-performance optical sorting and air density separation technology, specifically suited for: • MSW (Municipal Solid Waste), • Packaging, • RDF/SRF, • Plastics, • Film, • Paper, and light waste recovery.