Low loader semitrailer

FAYMONVILLE Multimax Satteltieflader (2+2) - nachlaufgelenkt

Condition: used, maximum load weight: 51,800 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 07/2024, next inspection (TÜV): 07/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Selection of features. Complete specification available on request. Gooseneck: * Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm, with rear chamfer approx. 1,000 mm x 10° * Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Area: * Loading area with extendable design, approx. 8,800 mm long with rear chamfer approx. 500 mm x 10° * Recess in the loading area extending into the chamfer for holding an excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) Ramps: * Pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide * Rubber covering * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually, approx. 235 mm outwards and approx. 215 mm inwards Axles and Suspension: * BPW axles and suspension, 1st and 2nd axle fixed, 3rd and 4th axles steering * 3rd and 4th axle with electromagnetic reverse interlock, controlled by reverse gear and manual activation * Technical axle load: 12,000 kg * Air suspension with raise and lower valve Tyres: * 235/75 R 17.5 3PMSF twin tyres Brake System: * WABCO EBS-E braking system in accordance with EU regulations Trailer Colour: * RAL 3002 Carmine Red Accessories included: * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power pack to control hydraulic operations * TPMS tyre pressure monitoring system according to ECE R 141 * On the gooseneck: 1 pair plug-in aluminium side walls and rear wall * Mechanical landing legs with 2-speed gearbox and crank handle * Continuous hardwood floor approx. 50 mm thick over the loading area, interrupted between the axles (increases coefficient of friction) * 1 intermediate platform with recessed loading area, approx. 300 mm wide * For the intermediate platform, approx. 300 mm wide, a mechanical lock for securing it on the extension * Extendable (galvanised) side extensions, approx. 230 mm per side (excluding wooden planks) * 1 pair of permanently installed wheel recesses up to the extension, approx. 700 x 410 mm (W x D), in the loading area in front of the 1st axle * Between the 2nd and 3rd axle in the loading area: 1 pair of permanently installed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D) * Covers for wheel recesses, split in longitudinal direction, with wooden covering and external securing plugs * Control valves for hydraulic ramps on the right side of the vehicle * 1 pair of mechanical rear supports * Super Grip 25 mm rubber flooring and approx. 5 mm steel plate as additional reinforcement on the sloped loading area Codjyc Ax Hjpfx Abcsgn * Includes widening planks to widen the area below the wheel recesses * 1-piece INOX toolbox, approx. 2,480 x 340 x 390 mm (L x W x H), straight version, with 2 external side doors and 1 top lid, mounted behind the front wall on the gooseneck * Removable steel-edged widening planks * Centralised lubrication system with 1 pump, BEKAMAX brand, filled with standard grease according to NLGI-2 * 1st axle with automatic lift axle function and traction aid compliant with EU Directive 1230/2012 * HRM metallization of the entire vehicle chassis using ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection

Condition: used, maximum load weight: 51,870 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 03/2025, next inspection (TÜV): 03/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Complete equipment details available upon request. GOOSENECK * Gooseneck in SNT design to optimize loading platform length, length approx. 3,700 mm, rear with chamfer approx. 1,000 mm x 10° * For tractors: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high * At the front connection strip: yellow-red air couplings * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for hydraulic operations * External beams of the gooseneck with mounting holes for bolted lashing rings * One mounting hole at the rear upper part of the gooseneck external beam for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in side aluminum drop sides, approx. 400 mm high, anodized version * On the gooseneck, 1 plug-in aluminum rear wall, approx. 400 mm high, anodized version * Approx. 40 mm thick hardwood flooring above the gooseneck * 2-inch kingpin * Gooseneck guide plate for fifth wheel, approx. 500 mm wide * Rear gooseneck mounting for aluminum ramps * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Loading platform, extendable version, length approx. 8,800 mm, rear with chamfer approx. 500 mm x 10° * Recess in the platform and chamfer for accommodating the excavator dipper stick approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension * 1st and 2nd axle fixed, 3rd and 4th axles steering trailing axles * 3rd and 4th axles with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load approx. 50,000 kg * Complete platform and interrupted between the axles with approx. 50 mm thick hardwood flooring (increasing the coefficient of friction) * Platform locking with conically welded locking profiles every approx. 250 mm Codpsxtc Uhjfx Abcjgn * Elongated slots for insertable and repositionable bridging elements at the front of the platform * Intermediate table with set-down platform, approx. 300 mm wide, for large cross-section telescopic tube with sheet metal covering – front and rear with elongated slots for insertable and repositionable bridging elements – removable cover flush with the platform * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 6 pairs of flush-mounted lashing rings in the outside frame of the platform, foldable outward (LC 10,000 daN) * Additionally, 1 pair of lashing rings externally on the front cross member of the platform, approx. 90° turned inward towards the platform (LC 10,000 daN) * Extendable galvanized widening extensions by approx. 230 mm per side * 1 pair of permanently installed wheel recesses, open up to the extension, approx. 700 x 410 mm (W x D), sheet-covered in the platform ahead of the 1st axle, wheel recesses with square climbing strips approx. 15 x 15 mm, spaced approx. 200 mm * Between the 2nd and 3rd axles, 1 pair of permanently installed wheel recesses on the platform, approx. 1,695 x 700 x 410 mm (L x W x D), covers for wheel recesses split lengthwise, with wooden overlay, outer plug-in loc