Machining Center - Vertical

FEELER NBP 1000 A

Condition: used, Year of construction: 1979, x-travel 800 mm Dcsdpfjwwwqhsx Addjr y-travel 300 mm z-travel 400 mm turning speed range 25 - 2.000 U/min power capacity 4 kW feed 5 - 500 m/min rapid traverse 1,5 m/min work table: 1.000 x 700 tool taper SK40 weight 1,8 t dimensions of the machine ca. 2,50 x 2,40 x 2,00 m The machine is in good condition. The digital display is defective (the scales are ok) Extra interchangeable milling head. No accessories.

Condition: good (used), Year of construction: 2007, Machine is in good condition, Parts shown by hand not come. SK 40, 24 tool places in tool changer. 10.000 rpm Dcsdpfx Adowk Nm Ijder

Condition: excellent (used), Year of construction: 2002, We now have two Kardex Shuttle XP 500 units from 2002 in good condition available. These Vertical Lift Modules (VLMs) are a great solution for saving space and improving storage efficiency. Each tray is 2650 mm wide and 864 mm deep, and can hold up to 485 kg. The system helps speed up picking times and boosts productivity by using automated handling and flexible tray setups. This is a reliable model, and we can provide both original servicing and spare parts in the future. Machine specifications: Manufacturer: Kardex Remstar Manufacturing year: 2002 Model: SHUTTLE-XP-500-2650x864 Height: 7,000 mm Dsdswl Inmspfx Addecr Width vertical lift module / tray: 2,980 mm / 2,650 mm Depth vertical lift module / tray: 3,074 mm / 864 mm Number of trays: Approx. 21 trays per lift Maximum weight per tray: 485 kg Electronics: 3/N/PE 400V, 3x17A

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 420mm, turning length: 820mm, spindle bore: 105mm, speed: 3000rpm, spindle power: 22kW, travel X/Z: 280mm/820mm, tool positions: 10, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 4400mm/2100mm/2300mm, weight: approx. 6000kg, control: Mitsubishi M-720BM (MAPPS 2), operating hours: 10000h. Including various accessories. The driven tools have never been used, only the Y-axis has run. Measuring arm and ball screw of the Y-axis are as good as new. Documentation available. On-site inspection is possible. Djdpfxev I U Iye Addocr

Condition: used, Year of construction: 2016, x-travel 6.500 mm y-travel 4.250 mm z-travel 1.500 mm Control HEIDENHAIN iTNC 530 HSCI table-size 7500 x 3000 x 300 mm distance between columns 3.800 mm rapid travel x/y/z 30.000 mm/min tool taper HSK 100 number of spindle speeds 6.000 U/min/rpm Dsdpexb Ed Uofx Addocr transmission ratio 2 Motor output 37 kW Number of working hours 28.475 h Spindle hours 12.629 h Tools changer 60 fach/tools Internal cooling system 36 bar Chip coveyor Doppel milling head 5-Achs-Fräskopf OAD total power requirement 80 kWA weight of the machine ca. 85 t

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Machine equipped with Nakanishi tools for the dental sector that has always operated in oil – fire prevention system – Iemca Boss 338HD/32, new in 2015 – well tooled – Fanuc 32i-B Control. Dodpfjw Ibpnex Addocr

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: Dcjdpswbvhaefx Addor - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: good (used), Year of construction: 2015, Very good machine - precise and reliable... worked in 1 shift only (8- 10 hours per day) Dedsv Acphepfx Addocr

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min Dcjdpfx Adjvwgm Hsder feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: used, TECHNICAL DETAILS - Number of axes : 4 Dcedpfxsvt Eifj Addor MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 6.7 [kW] - Spindle speeds : 10.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700 x 400 x 300 [mm] - Rapid traverses rates (X/Y/Z) : 50 / 50 /56 [m/min] - Cutting feed rates (X/Y/Z) : 1 - 30 [m/min] - Distance table / spindle nose (min./max.) : 330 - 630 [mm] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 - Tool exchange time : 0,8 [sec] TABLE - Table dimensions : 800 x 400 [mm] - Maximum weight upon table : 250 [kg] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 9,5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.220 [mm] - Machine height : 2.497 [mm] - Machine weight : 2.400 [kg] EQUIPMENT - CNC : Brother CNC-C00 - Interface : Ethernet / USB - Electronic handwheel - Type of divisor : 4e axe CNC intégré * Coolant tank * with high-pressure pump - Coolant through spindle - Electric transformer