Band Saw

FEMI N 251 DA XL

Condition: new, capacity 90 degrees: round 105 mm capacity 90 degrees: square 100 mm 100 x 105 dimensions of saw-band 1335 x 13 x 0,65 mm Lredsfv Aq Rspfx Ab Uet dimensions 650 x 310 x 300 m band speed 30 - 80 m/min total power requirement 0,95 kW weight of the machine ca. 18 kg Action Price!! Berg & Schmid - assembly band saw PBS 90 ESC Powerful and particularly robust metal band saw with Die-cast aluminum saw table and stepless cutting speed for Miter cuts up to 60° Share of freight costs: EUR 25.

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Lodedzqb Eepfx Ab Uert Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

Condition: good (used), Year of construction: 1992, Offer 23426 Technical Data: - Cutting range at 90° round 420 mm - flat 635 x 290 mm - Cutting range at 45° round 360 mm - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Infinitely variable cutting speeds 18 to 108 m/min - Hydraulic lifting and lowering of the saw frame Lodpfxsrl Irvj Ab Usrt - Hydraulic material vise - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device - Machine mounted on bogie - Feeding roller table motor-driven 4000 mm - Discharge roller table with length stop 6000 mm - Required space approx. W 2500 x H 1400 x D 1100 mm - Machine weight approx. 950 kg - Roller table weight 2000 kg

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 238828, Available: Immediately Lodpfspr Uvrsx Ab Usrt

Condition: excellent (used), Corner jointing machine, Pressta 4000 Shipping within the EU: approx. €350 Lrsdpfx Absl Skl Do Uet

Condition: new, Year of construction: 2022, IN STOCK -- The ARG 235 plus is a manual metal bandsaw with high cutting accuracy. This machine allows miter cuts from -45° to +30° continuously (swivel range left 45° and right 60°) Technical Specifications: ● Cutting range: - 90° round: 235 mm / square: 230 mm / rectangle: 280 x 180 mm - 45° Right round: 165 mm / square: 145 mm / rectangle: 185 x 180 mm - 30° Right round: 115 mm / square: 80 mm / rectangle: 115 x 80 mm - 45° Left round: 185 mm / square: 160 mm / rectangle: 185 x 100 mm ● Drive Power Saw Blade: 0,9 / 1,4 kW / 400 V / 50 Hz ● Saw Blade Speed: 40 and 80 m/min ● Saw Blade: 2710 x 27 x 0,9 Lsdpsmftv Refx Ab Uert Standard Equipment: ● Powerful saw blade drive ● Stepless adjustment of the cutting feed from the control panel ● Manual clamping of the workpiece, movable clamping stock with dovetail guide ● Easy adjustment of the saw for miter cuts by rotating the saw frame (stops at 45°, 60°, and 90°) ● 250 mm material stop without scale --> Also available in different sizes or versions!

Year of construction: 2019, operating hours: 380 h, condition: ready for operation (used), overall weight: 300 kg, total width: 730 mm, total height: 1,585 mm, laser power: 300 W, This 3-axis ALPHA LASER ALM 300 was manufactured in 2019. It features a powerful Nd:YAG laser with an average power of 300 W and a peak pulse power of 9 kW. The movement range is 120 × 110 × 800 mm, allowing for versatile applications. If you are looking to get high-quality laser welding capabilities, consider the ALPHA LASER ALM 300 machine we have for sale. Contact us for further details. • Laser type / wavelength: Nd:YAG, 1,064 nm • Operating mode: Pulsed • Average power: 300 W • Peak pulse power: 9 kW • Pulse energy: 90 J • Pulse duration: 0.5–20 ms • Pulse frequency: Single pulse up to 100 Hz • Welding spot diameter: 0.2–2.0 mm • Focusing objective: 150 mm (further lenses per lens data sheet) • Work area / axes: • Movement speed (X/Y/Z): 0–25 mm/s • Movement range (X/Y/Z): 120 × 110 × 800 mm • Lowest working point: 530 mm • Highest working point: 1590 mm • Arm deflection: 1300 mm • Observation lens / ergonomics: Microscope attachment with eyepieces for glasses wearers 10× • Electrical connection: 3 × 400 V / 50–60 Hz / 3 × 16 A • Condition: Demo/showroom use only; excellent technical and visual condition Lsdpfxszf A Ifj Ab Uert

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data Ledpfx Aboudi Une Uort TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Year of construction: 1988, condition: good (used), machine/vehicle number: D 05103, Item No. 13439 Technical data: - Polishing wheel / grinding wheel dimensions: approx. 300 x 40 x 76 mm - Grinding belt dimensions: approx. 3500 x 50 mm - Contact wheel dimensions: 400 x 50 mm - Drive speed: 1450 rpm Lredpfx Abok D Ewge Uet - Drive: 400 V / 1.8 kW - Space requirement: approx. W 1100 x H 2450 x D 800 mm - Weight: approx. 300 kg

Condition: good (used), x-travel 400 mm y-travel 375 mm z-travel 250 mm table-size 205 x 800 mm T-slots 4 x 45 14 H7 speeds 50 - 3150 U/min tool taper 40 ISO quill stroke 50,0 mm Feeds X + Z Axis 5.0 - 1000 mm/min Feeds Y Axis 5.0 - 670 mm/min rapid traverse 2.4 / 1.6 m/min control Heidenhain total power requirement 5.1 kW Lodpfxoxl E Syj Ab Ujrt weight 950 kg range L-W-H 1860 x 1790 x 1750 mm Machine from a vocational training center In good condition (!!) Equipment: - MAHO universal tool milling/drilling machine - HEIDENHAIN "TNC 135" positioning/path control * 3-axis manual data input control * Programmable by the machine operator * Convenient and easy operation - Electric motor-driven feed rates in all axes (X/Z/Y) * X and Z axis: 5.0 - 1000 mm/min with rapid traverse of 2.4 m/min * Y axis: 5.0 - 670 mm/min with rapid traverse of 1.6 m/min - Tiltable milling head to both sides - Tiltable T-slot universal table - Vertical clamping range - Continuously variable speed adjustment - Manually extendable spindle sleeve - Hardened and ground guideways - Electro-hydraulic tool clamp - Coolant system - Front coolant tank - operating instructions