Generator set

FG Wilson P2500-3 - 2500 kVA Genset - DPX-16035-O

Condition: refurbished (used), Our Edwards GV250 pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty Ihedpfx Ajfq Rgiobcow

Condition: excellent (used), Span actual approx. 25,0 m Jibs fixed leg useable (possible)/ total (possible) max. approx. 18,5 (21,5)/22,0 (25,0) m swing leg useable/total max.approx. 12,5/16,5 m Ijdpod N D U Djfx Abcshw Lifting height under Spreader actual/possible approx. 11,3/14,0 m Construction/reconstruction TAKRAF/TEICHMANN Year of reconstruction 2019

Condition: used, mileage: 9,62,877 km, lifting height: 20,000 mm, Year of construction: 2007, operating hours: 1 h, Drivetrain Drive: Wheel Weights Empty weight: 25.460 kg Functional Lifting capacity: 14.800 kg Identification Serial number: 970090 / 5127349 Ihsdpoxwim Eofx Abcew Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Goodyear Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 0x0x0 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2004, Cast epoxy resin - dry - 3 phase distribution transformer, manufacturer TESAR Italy, year of manufacture 2004, power 2500kVA, voltage ratio 20 (2x±2.5%)/0.4kV, AN-AF (forced ventilation, permanent overload 30%), Dyn11, uk=6%, IP00, standard losses, functional, complete documentation and rutine test report. Isdswpb Etjpfx Abcohw

Condition: new, Year of construction: 2024, machine/vehicle number: CAT3512BJLY892034, fuel type: diesel, power: 1,280 kW (1,740.31 HP), motor manufacturer: Caterpillar 3512B, General information Field of application: Construction Weights Empty weight: 14.000 kg Functional Generator capacity: 1.600 kVA Iedswvdvuspfx Abcohw CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fuel consumption: 238.6 Liter / Hour at 75% Load Generator: Caterpillar SR5 Frequency: 50 Voltage: 400 Drill equipment: Battery, Control Panel Transport dimensions (LxWxH): 5,72x2,08x2,22 Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information This brand new machine is part of Caterpillar's rebuild program Ask us for more information. Available in 50Hz - 400V Prime rating 1.500 kVA, Standby rating 1.600 Controls: EMCP4.2 / ADEM 3

Condition: good (used), Year of construction: 1985, functionality: fully functional, overall weight: 1,450 kg, total length: 1,620 mm, total width: 930 mm, total height: 920 mm, gear ratio: 200:1, torque: 21,400 Nm, shaft diameter: 160 mm, power: 14 kW (19.03 HP), 6 industrial helical bevel gearboxes from Flender / ASUG / Penig TGL 21815 maximum continuous torque: 27280 Nm Gear ratio: i= 200:1 max. power: 14 kW at 1250 rpm 20 kW at 1400 rpm Oil filling: 170 kg Weight: 1450 kg Shaft diameter d1: 40 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Ijdpforvg N Dsx Abcshw Total height h2: 925 mm Also available sprocket 48B3 17 Z and 48B3 35 Z

Condition: ready for operation (used), Year of construction: 2001, A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Kiefel Worms 80.25D outer layer extruder, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Reinhold SRK 200/9.6 film calibrating device. The entire line is controlled by a Plast Control system. Further components: integrated width measurement, C-scan for profile measurement, web center control, corona pre-treatment, film pre-draw. Including a replacement FSBK 5-layer blow head with IBC, replacement rollers, annular gap blower with filter, suction units, crane and external system terminal. Documentation available. On-site inspection is possible. Ihedov T An Sepfx Abcew

Year of construction: 2009, condition: good (used), Built in: 2009/2005 Size: min 100 x 120 mm max 300 x 430 mm Thickness: max 40 mm Film thickness 20-100 mµ Mechanical speed: 25,000 Ex./h Ijdpfxoc Icm Rs Abcjhw Equipment: • 10 stations rollstream ROS • 1 VSE-ROS-ES-RE-300-KWE twin multi disc unwind station AWS • 4 MTD-AWS-OWK • built in 2005 JET Feeder • 8 JEF-450-FVM-SA190 • built in 2005 foil wrapping machine CMC 2800 • with two feeders • built in 2009 twin stacker CMC

Condition: new, Year of construction: 2025, machine/vehicle number: CATDE125JGJ700172, fuel type: diesel, motor manufacturer: Caterpillar C32, General information Field of application: Construction Weights Empty weight: 10.083 kg Functional Generator capacity: 1.250 kVA CE mark: yes Iodpfx Absrfnghocshw Other information Fuel consumption: 185.5 Liter per Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 5,831x2,3x2,549 Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Made by Euro-Stel, Belgium YOM 2013 extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included EXCELLENT CONDITION Iedswivdkopfx Abcehw