Panel van

Ford Transit Custom 320 / 2.0 TDCI / L2H1 Limited / ...

Condition: used, mileage: 2,19,457 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,300 mm, first registration: 10/2022, fuel tank capacity: 80 l, CO₂ emissions: 227 g/km, emission class: euro6, color: light grey, number of seats: 3, number of previous owners: 2, Year of construction: 2022, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, traction control, trailer coupling, General information Number of doors: 5 Model range: May 2019 - Jul 2023 Cab: single Technical information Ncjdoyh Au Aopfx Afaon Torque: 405 Nm Number of cylinders: 4 Engine capacity: 1.995 cc Transmission: 6 gears, Automatic Measures length/height: L2H1 Dimensions (LxBxH): 534 x 203 x 206 cm Weights Empty weight: 2.044 kg Carrying capacity: 1.156 kg GVW: 3.200 kg Interior Interior: black Consumption Average fuel consumption: 6,6 l/100km (43 MPG) Maintenance, history and condition Service history: Present (serviced by dealer) APK (MOT): tested until 10/2026 Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: new, Year of construction: 2025, For current prices and delivery times, please contact us. Dimensions and weights: Length (product): approx.3265mm Width/depth (product): approx.1065mm Height (product): approx.1550mm Weight (net): approx.1965kg Working ranges: Center height: 230mm Center width: 2060mm Circumferential diameter over machine bed: 460mm Circumferential diameter in the bed bridge: 690mm Swing diameter over cross slide: 270mm Turning length in the bed bridge: 240mm Bed width: 300mm Speed range: Number of speed ranges: 12 Speed range: 25 - 2000min¯¹ Electrical data: Power drive motor5.5kW Supply voltage400V Mains frequency50Hz Cooling lubricant system Cooling lubricant system Coolant pump output: 125W Spindle: Spindle holder: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar passage diameter: 58mm Steel holder max. mounting height: 25mm Spindle cone: MK 6 Tailstock: Nsdjq Ukbpopfx Afajcn Tailstock holder: MK 4 Tailstock quill stroke: 130mm Tailstock quill diameter: 60mm Pitch: Pitch metric:0.1 - 14mm/rev Number of leads metric: 41 Pitch inch: 112 - 2Gg/1" Number of pitches inch:41 Pitch Diametral Pitch: 4 - 112DPI Number of pitches Diametral Pitch: 50 Module thread pitch: 0.1 - 7mm/rev Number of module thread pitches:34 Travel distance: Top slide travel: 125mm Travel of face slide: 285mm Bed slide travel: 1805mm Feed rate: Feed range longitudinal: 0.031 - 1.7mm/rev Number of longitudinal feeds: 42 Feed range flat: 0.014 - 0.784mm/rev Number of feeds flat: 42 Electrical connection: Total connected load: 5.8kW

Condition: excellent (used), Year of construction: 2012, 4-Head Embroidery Machine with 12 Needles per Head Sewing speed: 1000 stitches per minute (spm) Distance between heads: 360 mm Njdox Swxzopfx Afajcn Embroidery area: 450 × 360 mm Stitch length: 0.1 ~ 12.7 mm (minimum increment 0.1 mm) Automatic thread trimming and thread break detection Power supply: 220 V; 1.1 kVA Machine dimensions: 2320 × 1360 × 1750 mm Weight: 600 kg OPERATION MANUAL AVAILABLE

Condition: ready for operation (used), Year of construction: 2023, OEM – laser marker (laser class 4) Laser source is a 20 Watt fiberlaser with 1064 nm wavelength. The working area is 100 x 100 mm, up to 300 x 300 mm is available as an option. No external cooling is necessary. Input-voltage: 110...240 VAC / 50 Hz. Further applications are laser engraving and material ablation. The control software is installed on a PC, optionally also a Laptop can be used. The language of the software can be choosen (German, English). Nedpfxon Atmvo Afajcn The laser is prepared for an integration into a ‘higher level system’. For this interfaces for Interlock, emergency stop, laser control etc. are available. We are happy to support the customer according to his requirements.

Condition: used, Year of construction: 1955, _____We sell here 1 restored Mercedes Benz Unimog U 401 Oldtimer from year of construction 1955, slightly moist with oil, otherwise very good condition, 25 HP, empty weight 2150 kg, payload 1.000 KG, permissible total weight 3.150 KG, all-wheel drive, 25 HP diesel engine OM636, tires 6.50x20, trailer coupling, soft top, displacement 1767 ccm, 30 km/h. Further details available on request, storage location: 94491 Hengersberg Nodpfx Afjtrqz Seascn

Condition: used, machine/vehicle number: 008198, X axis working area: 4200 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 18.5 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 35 Total number of tool changer positions: 26 Ncedpfox A Hbkox Afaen

Condition: used, empty load weight: 6,220 kg, axle configuration: 3 axles, first registration: 10/2013, next inspection (TÜV): 02/2026, suspension: air, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, 3-axle stainless steel tank semi-trailer, manuf. HLW - First registration: 09.10.2013 - Number of axles: 3 - Suspension: air - Lift axle - Steering axle - Axle type: SAF - Brake: disc - Length: 8,000 mm - Width: 2,550 mm - Height: 3,400 mm - Unladen weight: 6,220 kg - Next inspection: 02.2026 - Body manufacturer: HLW - Tank material: stainless steel - Total tank volume: 27,000 L - Tank compartments: 1 - CIP cleaning Nsdpfjxc Nq Uox Afaocn

Condition: excellent (used), For sale: professional tool holder from the renowned brand WNT Germany – model B40 ER16M A=100. The holder is equipped with a Centro-P Germany HPC16MS-DI precision collet, ensuring maximum accuracy and clamping stability. The set also includes a VHM drill, making it ready for immediate use on a CNC machine. Condition: very good, the holder is fully functional, no play, with normal signs of use. Premium-class equipment – ideal for professional machining centers where precision and reliability are crucial. Ncodpsw Rr A Djfx Afaen

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Ncedsxnpf Nspfx Afaen Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Condition: excellent (used), Complete, professional HOLEX tool holder for sale, designed for micro-drilling and precision machining. Technical specification: Nedpfx Ajw Rd Swefaecn • Manufacturer: HOLEX • Reference: 300520 16 • Model: SK 40-1/10-100 • Length: 100 mm • Collet: ER16 with HOLEX nut (marking G 6.3 / 15,000 rpm visible) • Spindle: SK40 • Max torque: 70 Nm • Balancing: G 6.3 / 12,000 rpm • Year: 11/10 • Included: micro drill – mounted and ready for operation Very good technical condition – the collet holds securely, drill is undamaged. Ideal tool for highly precise operations in electronics, medical, or toolmaking applications. Shipping or personal pickup available.