Membrane filtration system

GEA GEA UF Unit 32 X 6"

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Caodpfswbvhaex Addoa Mass (bar loader) = 700 kg

Condition: good (used), functionality: fully functional, Used Bottling Line | Used Beverage Line | Soft Drinks NP 625 | ASEPTIC PET BOTTLING LINE Year: 1998 - 1999 Speed: 18,000 Bph 1.5L Line consisting of: SIDEL Blower Model: SBO 16/16 ROUE Number of cavities: 16 Type: rotary CHILLER AND COMPRESSOR NOT INCLUDED Caedpfetu Hy Nsx Addsa Preform elevator Preform rearranger PROCOMAC monoblock Type: ASECTIC Rinser Gravity filler Capper Cap type: prethreaded plastic Sleevering machine Type: rotary Long-run warehouse Steam tunnel OCME Bundler Film-throwing type OCME Palletizer Type: push type Film-laying system Pallet magazine OCME pallet wrapper

Condition: new, Year of construction: 2021, functionality: fully functional, surgical mask line, high speed surgical mask line, Food Pad, wound pad, mask line The 3-ply surgical mask line , wound pad, mask production system offered here combines efficiency and safety features with a first-class meat pad, food pad, fruit pad . The integrated extra module "Single Pack" enables the food pad production machine to pack each mask individually wrapped at full speed of up to 800 pads / min. The film rolls also have an autosplice function, so that the system weld the film together on the fly while unit operation. Surgical mask line can be used as following outer layer Spunbond nonwoven middle layer is meltblown layer bottom layer is spunbond nonwoven The food pad is made up of 3 layers of non-woven material: - An outer layer of spunbond/film - A meltblown filtration layer/sap , saf , fluff, pulp absorbent layer - An inner layer of spunbond/film surgical mask line food pad meat pad fruit pad These product features are realized thanks to the use of precise welding rollers, a modern and intuitive HMI with touchscreen function for simple and clear operation, as well as web guiding systems implemented. Intelligent sensors ensure that the material levels are precisely determined. If a low material level is detected, the material is welded to one another using the autosplice function without stopping the system. Plant details: - Solid, high-quality system structure with over 25 tonnes for maximum stability - Pneumatic material winding shafts for flexible and easy exchange of the rolls - Pneumatic material winding shafts in double design for quick set-up times and convenient handling - Adjustable web tension through pneumatic modules - Autosplice function for convenient material welding at the end of the roll - Individually controlled winding shafts for maximum precision E3b2qnt - Servo driven unwinder, PLC control - Sensor technology for material presence control - Automated alarm & stop function in the event of material tear - Web guiding for maximum precision of the raw material - Large and intuitive touchscreen - The touch screen can display the diameter of the rolls, the material ratio, the servo load and alarm codes - The machine speed can be conveniently set on the touchscreen - Error messages can be tracked in the alarm and error history. These include: Raw material, joining, splicing and fan defects - The production quantities and other details can be viewed on the HMI aswell Performance data: - Power consumption: on request - Power connection: 380 V / 50 Hz - Number of cycles: up to 800 masks / min. - depending on the material - Carton: depending on the packaging format - Compressed air: 6-8 bar with sufficient volume / reserve Casdpfxjh Rwk To Addea - Dimensions: 15 m x 4 m x 3 m (LxWxH) - different depending on the equipment - Weight: 25 tonnes - varies depending on the equipment System modules: - Unwinding units for spunbond, meltblown andfilm with automatic splicing unit side embossing unit - Triple folding food pad. - food pad n the side embossing unit - End cutting unit (high speed steel) - Product exit conveyor - Single pack packaging module - Security doors with sliding construction

Condition: excellent (used), Year of construction: 1988, wire working range: 0,1 - 1,3 mm cutting length: 5 - 70 mm Csde Syv Tjpfx Addoaa output: 400/min. complete with ciller and motorized decoiler

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: -6x M & P onion peeler machine -all conveyers, elevators for transport peeled, unpeeled and waste product -inspection table -all working platforms Casdpfx Ajtzmifoddja -all hoppers for row (unpeeled materials) Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, Westafalia Separator SB 60-36 used in beverage industry, in excellent condition. Cajdpeq U Dbdofx Addea

Condition: refurbished (used), Chamber filter and membrane filter presses, plate sizes 400 x 400, 470 x 470, 630 x 630, 800 x 800 mm, used, with stainless steel lining, filter plates are food-safe, available in various designs Casdpfx Aofbbqvsddoa

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Cajdpfx Adstiy Ntsdea Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Codpfx Aen D Ew Ioddsaa Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Year of construction: 1985, condition: good (used), COMPLETE COATING LINE WITH THE FOLLOWING POSITIONS: 1 HYDROPRIMER SPREADER 2 OVEN WITH UV LAMPS + IR 3 DOUBLE COATER WITH REVERCE 4 UV LAMPS 5 DOUBLE COATER 6 UV LAMPS 7 DMC SANDER 8 CONVEYOR 9 COATING MACHINE TOUCH-UP DYE SORBINI Cajdpfx Aek Scufsddea 10 IR LAMPS 11 FINISHING ROLLER 12 UV LAMPS 13 EXIT CONVEYOR