Dimensions (L/W/H) L600 x B500 x T295 mm
capacity 300 W
electr. connected load 230 - 240, 50 V/ Hz
Bpvfdxwsgz
*** Special Offer ***
*** Changes and errors in the technical data and specifications as well
Subject to prior sale!***
tank capacity: ReinH²O=280 l
percentage of cleaning: 10 µ
total power requirement: ca. 1,5 kw
weight of the machine approx.: 134 kg
dimensions L x W x H: 1,85x0,7x1,8 m
Filtering System with steel sheet construction on a pipe frame.
application area:
- filtration of mineral conterminated polluted/dirty water. No oil or chemicals!
The pump filtering system modul is for continous operation.
- pump filtering system Type P480-EPPFF
equipment:
Ysx237d3
- operation hours counter
- filtering fleece ...
ELECTRICAL SPECIFICATIONS
.. mains voltage: 400 V
.. mains frequency: 50 Hz
DIMENSIONS / WEIGHTS
.. space requirements -left/right-: 1300 mm
.. space requirements -front/back-: 1120 mm
.. total height: 920 mm
Bpxszie02n
Application:
The system consists of a steel housing with filter bottom.
As filter bottom slotted screen or perforated plate is used, which
at the same time carrier of the filter belt is. The transport
the filter belt is made by a pull-out device.
-> max. Power throughput 750 L...
Automatic dedusting of the filter components with pressurised air
Cvcjz3fo
Filter surface 33 qm
Donaldson ultrafilter machine with 2 filtration units.
Container type: 0110
max.operating pressure: 100 bar
max.operating temperature: 283 K / + 333K
Bsguluyh9i
Volume: 5.14l
Test pressure: 143 bar
This machine is available 2 times. The price is for one machine. Further data can be found in the photos.
Mol screen, thermal oil system, cross-flow heat exchanger and
control/ process visualization.
Throughput 6.000 m³/ h
Use as activated carbon filter possible!
Functional description:
Previous use in an exhaust air purification plant for dehumidification or drying of the exhaust air to prevent icing in the downstream processes.
Design: Stainless steel , ATEX
Year of construction: 2016
Number of adsorbers: 2, diameter 3.000 mm, cyl. height 2.400 mm
Exhaust fan: 6.000 m³/ h , 7.000 Pa pressure, 30 k...
This listing is for a 1998 BUHLER MVRS - 18 Silo Filter.
The Airjet Filters MVRS are used exclusively for separating dust particles from gas and dust mixtures in various fields including food, air exhaust for machinery, chemical and plastic processing.
Machine Name: Airjet Filter
Code: MVRS
Materials: 37 steel external with stainless steel contact parts
Brsieppzsy
Pressure range +50/-250 mbar
Teperature range: -20 - +90 degree c
Housing Diameter: 1000mm
Inlet height: 320mm
Cone height: 1190mm...
air flow rate: m³/h
suction stud diamter: 380 mm
drive power: kW
filter surface area: 610 x 660 + 560 x 470 + 570 x 470 mm
total power requirement: 4,0 kW
Beylyorrhq
dimensions L x W x H: 0,6 x 1,1 x 2,2 mm
- 2x suction nozzles at the bottom left/right: Ø 300 x 200 / Ø 200 x 170mm
- exhaust air outlet W x H: 280 x 145mm
- 3 pieces slide-in filters
- with wall fixation
Description: Stainless steel pressure belt filter for the treatment of cooling lubricants or drilling and grinding emulsions in the machine tool industry or in the waste water sector for the filtration of waste water.
Functional description:
The pressure belt filter consists of two chambers. The upper chamber can be opened via a cylinder
upper chamber can be opened. The chambers are sealed against each other by a seal attached to the upper chamber.
upper chamber.
The medium is conveyed to the f...
Bag filter with explosion protection equipment for St1-powder
Air volume 2700 m3/h
With pneumatic dedusting of the filter bags
Filter surface 51 m2
Gxachk
Pipe connection NW 250
Control unit for dedusting filter
Blower 2,2 kW, 1600 daPa with discharge silencer
Pressure relief valve DN 200
Used only for tests and as good as new.
Mild steel model
Power: 11kW, weight: 1.175t.
Xbyckxfp
An overhauled silo fiter
Manufacturer: Friwo GmbH
Be0bsml
Model: Pulsmaster PM 5/5/10
Housing: stainless steel 1.4301 pickled
Filter baskets: Steel S 235 hot-dip galvanized new
Filter bags: 5m² polyester needle felt 550 g/m², calendered, hydrooleophobic, electrically conductive,
length: 1050 mm
flat width: 500 mm
Cleaning: pneumatic, interval adjustable,
filter resistance: 80-120 Pascal
Control voltage: 24 Volt
Compressed air consumption: approx. 5 Nm³/h
Fan: 0,75 kW
Speed: 2900U/min
Pressure in...
Cartridge filter
Manufacturer: Bollfilter
Type: 6.61 DN150
Year of construction: 2000
Operating overpressure: 10 bar
Operating temperature: 80° C
Volume: 71 dm3
Bgy28ubujz
F = 30 µm
7-filter
Candle length: 460 mm
Different sizes
2 x with 8 filters
1 x with 4 filters
2 x with 2 filters
1 x small with 7 filters
...
The oil filter cutting device is used to separate cartridges and inserts, such as petrol, diesel and truck filters, without having to clamp or fix them. The oil filter is separated into housing, base plate and insert. The application is the actual hazardous waste. The housing and the base plate can be recycled after the waste oil has drained off. The insert can be further crushed by pressing together and at the same time further freed of used oil. This process reduces the volume and weight of th...
Manufacturer: NALCO
Year of construction: 2010
Documentation: no
Grpietuum
Storage location: Cold hall
Status: used - satisfactory
Control: (Nalco Ultra Soft)
Volume flow: 8.4 / 3.3 m³ (operating flow / backwash flow)
Volume: 1.4 m³ (per GFK pressure vessel)
Pressure: 10 bar (max.)
Temperature: 50 °C (max.)
diameter: 350 mm
Height: 1850 mm (with plinth)
Weight: 400 kg
Power consumption 2.2 KW
Bqotytqja
9 piece Filterkatuschen
Weight 150 kg
Volume flow: 18,000m³/h, power: 22kW, weight: 1.8t.
Br0vgmbabs
The FRIESS magnetic filters remove iron, steel and stainless steel particles from process liquids of all types and are designed for a flow rate of 70 l/min to 500 l/min. The magnetic filters remove ferritic particles down to less than 1 µm. Particularly during grinding, honing and lapping, these particles can get between the tool and the workpiece and thus impair surface quality and stock removal. In addition, the strong contamination of the cooling lubricant promotes the formation of bacteria.
...
TBH saturation filter system
Here we offer a TBH saturation filter system.
TBH saturation filter plant
GL Series
Environmentally friendly and energy-saving
As a "Green Line", the GL series stands for particularly environmentally friendly.
Fkmsth3h0
We have developed it especially with environmental protection in mind,
by programming it so that it uses less power than conventional extraction trays.
The energy-saving and noise-reduced blowers used are used in noise-sensitive environments
as in lab...
3x Rotodyne Ventilator
Bl2qjabait
Possible in combination with Stainless Steel Cycloon and valve.
Brand: Dinnissen
Description: Stainless steel pressure belt filter for the treatment of cooling lubricants or drilling and grinding emulsions in the machine tool industry or in the waste water sector for the filtration of waste water.
Functional description:
The pressure belt filter consists of two chambers. The upper chamber can be opened via a cylinder
upper chamber can be opened. The chambers are sealed against each other by a seal attached to the upper chamber.
upper chamber.
The medium is conveyed to the f...
Empty weight: 5500 kg
Dimensions: L 4853 mm x W 2035 mm x H 2222 mm
Technical documentation: yes, in German language
Accessories: control cabinet and sludge pump
Cxkni99a
Message: Belt width of 1000 mm (working width 900 mm), speed range: 1.46 x 9, 76 m/min, speed adjustment: by means of frequency converter, motor power: 2 x 1.1 kW, voltage: 400 V, 50 Hz,
Turbo Separator for the treatment of various sludges. For example for cleaning coolant materials.
All documents present:
Operating and maintenance instructions including:
Drawings
Circuit diagram
Test book
Design: Suitable for fine separation and tramp oil separation of approx. 30 l emulsion / min. at max. 60 degrees C operating temperature.
Technical data:
- Rotor: not alkali-resistant anodised aluminium alloy
- Capacity: approx 18 l
- Drive motor: 7.5 kW
Syligf8
- Geared motor: 1,5 kW
- D...
Connected load: 7.5kW, weight: 1.05t.
Gxt0uod
Suction Mobile
Bmdayijutq
Thirst Victor
380 V 16 A 0,75 KW
Output 6000m3/h
Length 1 m
width 0,60 m
height 1,60 m
Filter mat new
A stainless steel filter system with compressed air cleaning in very good condition.
Filter area 40 m².
Installed stainless steel radial blowers driving power 22kW; volume flow: 6700m³/h; pressing: 8000Pa
Compressed air valves: ASCO 24Volt
Number of filter bags: 48
Filter medium: no longer available
Isolation: Yes
with differential pressure measurement
Size L/W/H: 3000mm/ 1700mm/ 2100mm(to outlet)
The filter consists of 2 modules which are divided in the middle.
Also available stainless steel co...
Type: RB- 4A SLM
Manufacturer: GAF
Year of manufacture: 1996
Documentation: no
Inspection: yes
Storage location: Warburg warehouse
Status: used - as good as new
Temperature: 150 °C (max.)
pressure: 10,5 bar (max.)
Nivap
volume: 180 l
connections: (2 x DN 80)
Height: 1640 mm (total filter housing)
width: 1000 mm
Diameter: 590 mm (inside)
Diameter: 170 mm (4 x filter insert)
Weight: 400 kg (approx.)
Material: Stainless steel (1.4571 4VA)
Serial number: 10332
DESCRIPTION
Bmu97srnvo
The demineralized water station is used to produce the so-called demi water using ion exchange technology.
The station consists of 3 columns
Strongly acid cation exchanger working in the sodium cycle,
Strongly basic anion exchanger working in the chloride cycle,
Carbon filter
Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads.
Rouezts
The columns are made of AISI316L steel
Air performance: 0,64m³/s, pressure: 10,4kpa, fan: Piller, motor: Siemens, HEPA filter: Camfil Absolute. There are 2 units available.
7dy8j2vzc
Description: Application e.g. for particle filtration, service life extension in degreasing baths, emulsion splitting.
Type: Geno CFU 2/M5-UF 40
Manufacturer: Grünbeck
Year of construction: 1996
Documentation: no
Viewing: yes
Storage location: Warehouse Warburg
Status: used - satisfactory
Serial number: AB-96 101310
Filter surface: approx. 0.9 m² (per module, i.e. with two modules a total of approx. 1.8 m²)
Material: stainless steel (stainless steel module with ceramic membranes in 19-...
High hauling power
Soundproofed construction
Electronic control 4 "touch panel
Constant measurement of flow and filter clogging
Final filters
Inverter controlled fan
Bmu903w2bf
• Electrical data 22kW 380-400V 50-60Hz
• Theoretical capacity 12000 m3 / h
• 1/4 "pneumatic connection
• Number of filters 8 pcs.
• 160 m2 filtration area
• Automatic filter cleaning
• Air consumption max. 12L 6-8 bar / shot
• 50L waste container capacity
Description
• Dust collector equipped with an efficient radial i...
Capacity: 1000l/h.
Ms22d
Description: The slurry (sludge) reaches the drain bed
via a feed box to the drain bed, where the suspension releases water by gravity filtration. The sludge cake is rearranged by built-in baffles so that the water can run off on the surface of the sludge cake. The built-in baffles break up the resulting sludge layer, so that permanently free screen belt surfaces are created, which allow the water released by the flocculation to flow off quickly. The dewatered sludge is removed from the Drain Be...
Max. flow speed: 450l/min, max. operating pressure: 10bar, waste capacity: 7kg, operating temperature: 5-70°C.
Ms20f
Description: Chlorine electrolysis plant consisting of, Elclozid TS-250 plant for water disinfection and water treatment by electrolysis. Using electricity and salt, the plant produces the disinfectant sodium hypochlorite (NaCIO). This disinfection concentrate consists of a chemical compound of sodium, chlorine and oxygen. Applications include swimming pools, drinking water supply and process cleaning water for the food and beverage industry. Dosing tank / storage tank made of PE as well as cont...
Mechanical-physical seperation method: Number of modules: 2, material: Al²O³ / ZrO², median pore diameter: 0.05µm, membrane length: 1200mm, membrane diameter: 25.4mm, canal diameter: 3.3mm, filtration area: 14.8m².
Ms3ud
Description: ECA plant / disinfection plant from the beverage industry by Fumatech.
Type: ECA plant / 30 LSCH
Manufacturer: Fumatech
Year of construction: 2009
documentation:
Storage location: Warehouse Warburg
Status: used - good
Description: (Disinfection plant Fumagen - 30-LSHC. The plant is designed in open frame construction. Plant for electrochemical production of disinfection and membrane electrolysis).
Power: (evaluation of plant power during automatic operations)
Voltage: 25 A ...
Dimensions: Width: 2430mm, length: 3000mm, height: 2300mm, weight: 1200 kg, capacity precoat container: 900l, voltage: 400V, frequency: 50Hz.
7ixut9qns
Description: Alfa Laval's ALDRUM MEGA is ideal for medium to large volume sludge thickening, optimising processes with higher biogas production or achieving cost-effective dewatering. Covering the unit with GRP hoods.
Type: ALDRUM MEGA
Manufacturer: Alfa Laval
Year of construction: 2005
Documentation:
Storage location: Warburg warehouse
Status: used - good
capacity: 30 -90 m³/h (output / capacity)
length: 5100 mm (screening drum)
Diameter: 920 mm (screening drum / plastic screen cover)
...
There are 8 filter housings available, max. working pressure: 6bar, max. working temperature: 200°C, pressure vessel volume: 6.3l, material: stainless steel 1.4404, length: 242mm, height: 860mm, weight: 7.8kg.
Bdgjwzlsl7
Description: The Faudi microfiltration system RMF treats contaminated cooling lubricant oils and makes them available again at the appropriate pressure and degree of purity (5-10µm).
Particularly suitable for cleaning cooling lubricants (oil or emulsion).
Essentially consisting of:
FAUDI fine filter
FAUDI sludge filter
FAUDI magnetic separator: The magnetic separator is the most important part. The ferromagnetic particles are deposited on it. The rotor consists of extremely powerful permanent ma...
filter surface: 6400cm², size: DIN 800x800, operating temperature: 59.85°C max., burstoverpressure at 22.85°C: 0,08-0.12at, torque: 20Nm, vacuum pressure: 0.05bar max., including Radial Fan REITZ RGE 031-056021-00: Inlet temperature: 20°C, inlet pressure: 1.16kg/m³, volume flow: 560-617m³/min, shaft power: 38.53-41.8kW, rotational speed: 2072-2196/min max., operating temperature: 80°C.
Ssv33w
