FLAT GRINDING MACHINE

Geibel & Hotz FS 50 Optimus SA

Condition: good (used), Year of construction: 1988, machine/vehicle number: 1669-110-1406, Offer 25094 Technical specifications: - Drilling capacity in steel ST 60: 50 mm - Drilling capacity in steel ST 60: 60 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 225 mm - Drill spindle speed continuously adjustable from 35 – 950 rpm - Right-hand and left-hand rotation - 3 feed rates: 0.1; 0.16; 0.25 mm/rev - Throat 360 mm - Max. distance between drill spindle and table/base plate 740/1220 mm - Table with 2 T-slots 700 x 590 mm Bwedjwdvwtepfx Agksi - Height adjustable via rack and pinion with hand crank - Drive 400 V / 2.2 / 4.0 kW - Space required approx. W 700 x H 2150 x D 1150 mm - Weight approx. 850 kg - With: - Emergency stop button - Lighting - Coolant system

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Wheelhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced, adjustments made. Newly painted. Workhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock: Disassembled, inspected, overhauled. Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic block checked. X-axis: Disassembled, all worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, table ground. Z-axis: Disassembled, table ground, worn or defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet: Completely checked, various relays replaced. Paintwork: Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal distance between centers: 600 mm Max. distance between centers (with extended headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable pads for heads: 175–250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with interchangeable pads: 350–500 mm Swiveling range of table in each direction: 10° Max. grinding length for flat surfaces (max. width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Bwedpfx Asw U Ry Njgkji Table reversal delay: 0–5 sec Grinding wheel for external grinding, diameter - width - bore: 400x50x127 mm Grinding wheel for flat surface grinding: 250x13x76 mm Wheelhead spindle speed: 1,500/1,700/2,200/3,600 rpm Wheelhead swiveling range: 270°, with indexing every 90° Vertical travel of wheelhead, center height: 125–350 mm Transverse travel of wheelhead: 285 mm Hydraulic rapid traverse stroke: 40 mm Intermittent infeed of wheel by table reversal: 0.001–0.03 mm/dia Continuous infeed for plunge grinding: 0–0.9 mm/dia Micrometric infeed stop, by division: 0.001 mm/dia Workhead swiveling range: 360° Workhead spindle speed, stepless: normal/special: 20–400 / 10–400 rpm Internal taper of workhead/tailstock: Morse 5/3 Wheelhead motor: approx. 4 HP All technical specifications are given without obligation and subject to errors or omissions.

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm Bjdpfxjxmak Hj Agkjwi turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: good (used), Magnetic table 455 x 170 mm Bwedpfx Astu Il Togksi digital display water tank Honing device Wet sanding device

Condition: good (used), Year of construction: 1990, From liquidation: Mössner Rekord SSF 520 Year of construction 1990 NR.27968 Stepless speed from 15-2350m/min 4 gears Band welder BSSO25 Air pump Work light Grinding stone Table swivels left15°-right45° Bodpfxsviym Ds Agkswi Table size 790x740mm Clearance vertical 390mm--horizontal 500mm-- Height of the machine 2100mm Weight approx. 700kg

Year of construction: 1992, condition: good (used), machine/vehicle number: 20281, Offer 23034 Technical data: - max. grinding length approx. 350 mm - max. grinding width 150 mm - max. installation height with / without magnet 150 / 210 mm - grinding wheel stroke approx. 200 mm - clamping surface 300 x 160 mm - magnetic clamping plate 250 x 150 mm - grinding wheel dimension approx. 200 x 80 x 78 mm - grinding wheel speed 2800 rpm - swivel range of the grinding arm approx. 180 ° - manual swivel arm clamping via clamping lever - wet grinding device Bwsdpfoklxwksx Agkei - drive 400 V / 1,85 kW - space requirement approx. W 850 x H 1650 x D 800 mm - weight approx. 350 kg

Condition: used, Year of construction: 1989, Used, well-maintained GEIBEL+HOTZ surface grinding machine Model FS 50 SA Bwjdpfx Agowq Nc Nskoi Grinding area 500x250x375mm, Vertical automatic with fine-pole electro-magnetic chuck, Grinding wheel diameter 300x50x76.2mm, with paper band filter system, with manual dresser on top. various wheels and flanges Weight: approx. 2400 kg Space requirement approx. 2500x1800xHeight 2500mm Machine is located with us in 71334 Waiblingen-Beinstein and can of course also be inspected. Please contact us.

Condition: good (used), Year of construction: 2004, bore capacity in steel (diameter) 28 mm throat 300 mm bore stroke 150 mm distance spindle /table 60-765 mm distance spindle/base plate 1.200 mm taper MK 3 threading M20/M24 column diameter 115 mm table-size 510 X 425 mm spindle turning speed - stepless 60 - 1:400 U/min total power requirement 1,4 kW weight of the machine ca. 350 Kg. dimensions of the machine ca. 1,9 x 0,6 x 0,9 m Bodpfxewgi Evs Agkswi - Digital spindle speed display - Foot switch - Thread cutting device - Left-right rotation - 2-speed motor

Condition: excellent (used), Year of construction: 1996, grinding length 600 mm grinding width 350 mm total power requirement 7,5 kW Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : GEIBEL & HOTZ CNC horizontal surface & profile grinding machine model FS 635 - Z CNC year 1996 Grinding length max. (table movement 660 mm) 600 mm Grinding width max. (cross movement 360 mm) 350 mm Mounting height under new grinding wheel 375 mm Distance table – center of spindle min / max 140 – 525 mm Standard size of magnetic plate 600 x 350 mm Table size 820 x 350 mm Max. table load 400 kg Table speed 5 – 35.000 mm/min Cross movement, intermittently 3 – 40 mm Cross-/Vertical quick feed 5 m/min Grinding wheel measurements 300 x 50 x 76,2 mm Bwodpex Haryjfx Agksi Grinding spindle speeds, variable 1.000 – 3.000 rpm Grinding spindle-drive approx. 7,5 kW Total electrical load approx. 15 kW - 400 V - 50 Hz Weight approx. 2.600 kg Accessories / Special Features: • SIEMENS CNC control model 840 D with comprehensivel GEIBEL&HOTZ grinding software. User friendly interface, supported by dialog and graphics, simple programming also of complex grinding wheel profiling and easy linking of grinding cycles. • All standard grinding-programms and cycles as surface and multiple surfaces grinding with roughing-finishing-sparkout- return, plunge in grinding, automatic dressing cycle with compensation, etc. • electronic handwheel for 3 axis; cross feed (Z) and infeed (Y) effected by ball screw drive. • Table movement is actuated by belt drive (Z), which allows both very high and very low table speeds and is also ideal for profile grinding. • Hydraulically upwarding diamond dressing device mounted on the left side of the table (also for profile dressing); additional fixed dresser with automatic dressing cycle, including compensation. • Mounted sinus tilting magnetic plate 600 x 200 mm, fine pole division. • Separate paper band coolant filtration unit, separate switch cabinet, lamp for working area, various accessories, manuals, etc. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection of surface grinders – CNC or conventional - available. Please let us know your requirements.

Condition: new, functionality: fully functional, empty load weight: 7,500 kg, maximum load weight: 50,000 kg, overall weight: 57,500 kg, tire size: 295 60 R 22,5, Year of construction: 2026, Equipment: ABS, chassis, Side Hydraulic Tipper Heavy-Duty Chassis. High Quality and Durability Manufacturing. EU Standards. Double Line Brake Systems or EBS Systems. One-year warranty for manufacturing defects. Bedpfercignex Agkewi Customer Requested Color.