Work platform

GENIE Z 80/60, Arbeitshöhe 25,77m., Allrad, Gelände

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 7,900 h, machine/vehicle number: #652, load capacity: 350 kg, mast type: telescopic, lifting height: 28,000 mm, platform length: 1,800 mm, platform width: 800 mm, overall weight: 7,490 kg, transport length: 7,550 mm, transport width: 2,500 mm, construction height: 3,450 mm, Attention: This rental fleet machine is expected to become available in January 2026. Working height: 30.00 m Platform height: 28.00 m Lateral reach: 20.50 m Overall length: 7.55 m Overall height: 3.45 m Overall width: 2.50 m Platform capacity: 350 kg Chjdpfswnq Dpox Addof Permissible total weight: 7,490 kg Work basket (l x w x h): 1800 x 800 x 1100 mm Swivel range: 540° Basket rotation: +/- 85° Stabilizers: 2.56 / 3.90 / 5.10 m Other: - Basket arm 195° - Crank rotary table - Automatic basket arm rest - Roof protection grid 04/2024: Clutch + master-slave cylinder replaced and oil pan & fuel filter sealed 09/2024: Right joystick module replaced 10/2024: Fuel filter, basket tilt sensor replaced 11/2024: Rotary encoder replaced 01/2025: 2x truck battery replaced 04/2025: Solenoid coil As of 28.04.2025: approx. 73,000 km, approx. 7,900 operating hours Price: ON REQUEST

Year of construction: 2009, condition: ready for operation (used), machine/vehicle number: 527, Offer 23035 Technical data approx: - Pressure capacity 30 T. - max. sheet thickness 10 mm - max. punching diameter 105 mm - punching capacity - e.g. steel sheet : 105 mm in 1,5 mm ; 45 mm in 5 mm - e.g. VA - sheet metal : 90 mm in 1,5 mm ; 45 mm in 4 mm Chedpfx Adslnkc Usdof - stroke 7 - 70 mm - throat 560 mm - maximum stroke rate 120 H/min - single stroke / continuous stroke - drive 400 V / 4 kW - space requirement approx. W 8000 x H 1850 x D 1700 mm - weight approx. 1900 kg - with: - stop table with stops - foot switch; - emergency stop button - punch quick change device - various receptacles for punches and dies

Condition: used, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw Cjdov Uq Tlspfx Addshf ----- ----- Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm. When sawing stacked boards h max. 100 mm. The structure is made entirely of thick-walled and reinforced throughout painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cutting control in ergonomic position. Engine power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balance and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different Types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. The CE models must come with it as standard At least 1 meter long support plates/roller tables must be provided at the inlet and outlet. Technical data: ----- Saw cross section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz, 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 Machine additionally equipped with: ----- 2 m infeed table (right of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. load capacity 230 kg, Diameter 60 mm, distance 250 mm, width 320 mm. The space between the roles is enclosed in painted steel. Including lateral guidance. 2 m outfeed table (left of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. Load capacity 230 kg, diameter 60 mm, distance 250 mm, width 320 mm. The space between the rollers is of enclosed in painted steel. Includes side guide, stop guide and millimeter scale. 2 pieces of strong pneumatic stops with a width of 200 mm ----- Total price ex works: on request! ----- Image and video not original, show identical model Further options such as longer inlet/outlet, stop systems on request! (technical data according to the manufacturer without guarantee!)

Condition: new, Year of construction: 2024, Genie S-45 Trax-XC (Xtra Capacity, up to 454kg load capacity), new, used, demonstration machines available Csdpsrpzgusfx Addjhf

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm Chodspuy H Djpfx Addsf - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Condition: new, Year of construction: 2024, axle configuration: 4x4, fuel type: hybrid, color: blue, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 6.564 kg Functional Mast: articulated arm Lifting capacity: 300 kg Working height: 1.590 cm CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Max. horizontal reach: 694 m Chsdpfx Aov Tiivoddof Transport dimensions (LxWxH): 6,11x2,29x2,29 Additional information Please contact Christian Theißen for more information Units: 45-2226, 45-2135 Manufacturer: Genie Model: Z45FE Year of build: 2024 Condition: New Data: Max. working height: 15,92 m Max. platform height: 13,92 m Max. reach: 6,94 Drive type: Hybrid Total dimensions LxWxH: 6,11 x 2,29 x 2,29 m Platform dimensions: 1,83 x 0,76 m Max. basket load: 300 kg Swivel range: 355° Max. Pitch angle: 45% Ground clearance: 0,41 m Own weight: 6.564 kg Special features: Rotatable work basket /vertical rotation angle 135°, white tires. Location: 41468 Neuss immediately available

Condition: ready for operation (used), Cover FP 1 Milling machine Traverse path X-axis: 300mm Y-axis travel: 160mm Z-axis travel: 340mm Mounting: SK 40 with tightening thread Feed X-axis: 290mm Weight: approx. 940 kg (with pallet) Space requirement: 1300mm x 1200mm x 1800mm ( L x W x H ) Dimensions with pallet: 1400mm x 1400mm x 2000mm ( L x W x H ) You are welcome to come by for a viewing. We are happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Chodpjuvih Hsfx Addjf Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: good (used), Year of construction: 1996, functionality: fully functional, Out of insolvency: Avola ZB 400-5 Year of construction 1996 No. 51809 380 Volt 130mm cutting height saw blade 400mm Codporkztuofx Addshf Table size approx. 1030x740mm

Condition: good (used), Year of construction: 2011, mast type: telescopic, color: green, Mileage: 61.898 km Working height: 2.600 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: DE Chodpfemk S E Hex Addjf Please contact Vink Machinery for more information Palfinger P 260 B on Nissan Cabstar 35.13 * 2011 * Diesel * 61898 kilometers * 26 meters working height * 13.5 meters horizontal range * Stamp machine * Coming home function * Memory function * including documents

Condition: used, Year of construction: 2019, operating hours: 1,088 h, machine/vehicle number: E300006263, fuel type: diesel, Weights Empty weight: 6.460 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 1.580 cm Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Outrigger Max. horizontal reach: 750 m Cedpfx Adovyxu Isdehf Transport dimensions (LxWxH): 6.57x2.35x2.27 Additional information Please contact PFEIFER GROUP for more information