CNC turn-mill center

GILDEMEISTER TWIN 65

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mm Turning length : 650 mm In General: Year of construction:2007 Control:Siemens 840 D Bar capacity:65 mm Turning diameter:350 mm Turning length:650 mm Main spindle: Technology:Motor spindle Speed:5,000 rpm Power max.:35 kW Torque max.:370 Nm C-axis:0.001 Bar capacity:65 mm Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:26 kW Kdedoxtr Iwjpfx Aarew Torque:290 Nm C-axis:0.001 Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Partial hollow clamping cylinder Z-axis:670 mm X-axis:175 mm Tool carrier i (X/Y/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:300 Y-axis:80 mm ( +/- 40 mm) Z-axis:650 mm Tool carrier II (X/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:180 Z-axis:650 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system Measuring systems:Direct in all X-axes (glass scales) Bar loader:IRCO Breuning Part removal:Finished part gripper + indexing belt Emulsion mist separator:Mechanical Set-up mode:Electronic handwheel

Condition: used, Year of construction: 2008, functionality: fully functional, Used HAAS rotary table model HRT310 complete with HAAS pneumatic drive and tailstock. Kodpfx Aswu Uahearodw

Condition: good (used), Year of construction: 1999, Gildemeister MF Twin 65, year of manufacture 1999, Siemens 840 D control, travel X/Z 190/555 mm, 1 x Y axis +/- 40 mm, 2 turrets with 12 stations each, driven tools, VDI 30 mounting, C axis, spindle speed up to 6,000 rpm, max. bar capacity up to 65 mm, bar feeder is included but no longer installed on the machine. Kdodpfow Swcxex Aarow

Year of construction: 2002, condition: ready for operation (used), Axes: XYZCB (8-axes), max. turning diameter: 250mm, max. turning length: 300mm, bar loader diameter: 65mm, tool system: VDI30/tooth profile, torque: 150Nm, speed: 5000rpm, drive power: 22kW, control: Siemens Sinumerik 840D powerline. Dimensions X/Y/Z: approx. 2430mm/5600mm/2430mm, weight: approx. 13000kg, operating hours: approx. 34624h, spindle hours: approx. 22797h. Kdsdpfotufbyjx Aarow

Year of construction: 2009, condition: ready for operation (used), Turning diameter: 200mm, passage diameter: 330mm, passage diameter over cross slide: 260mm, travel X/Z: 160mm/460mm, feed X/Z: 24m/min, speed: 5000rpm, spindle clearance: 51mm, spindle power: 16.5kW/11kW, torque: 1665.5Nm/112Nm, tailstock: 400mm, tool positions: 12. Machine dimensions X/Y/Z: approx. 4200mm/1700mm/2300mm, weight: approx. 3500kg, control: Siemens Sinumerik 810D. Including chip conveyor. Documentation available. On-site inspection is possible. Kdsdpfx Aajv Dkb Iorjw

Condition: good (used), Year of construction: 2004, functionality: fully functional, turning length: 600 mm, INDEX C65 CNC turning and milling center Control Index C200-4D (Siemens 840d) 3 turrets each with 12 stations VDI-25 with W-toothing, all stations driven C-axis on main and counter spindle Transmit/Transcyl function Index tool breakage monitoring Kdsdpfx Aov Dgpzoarow Parts gantry gripper/parts conveyor belt 600L coolant tank with sieve, 8/18 bar Flow-through cooler for coolant Bar passage up to 65mm on main and counter spindle FMB Turbo 10-65, 3-meter bar loader Chip conveyor Machine is cleaned and loaded freely onto a truck

Condition: used, Year of construction: 2003, High performance planer Weinig type Hydromat 23 Planing and moulding machine Weinig Hydromat 23 for four-sided planing and moulding of wood with feed rate up to 100 m/min. Original data of the machine, technical modifications reserved. - spindles: 8 - Spindle arrangement: 1. bottom 18,5 kW // 6.000 rpm // flight circle 125 - 180 mm // counter bearing 2. right 22 kW // 6.000 rpm // flight circle 112 - 250 mm 3. left (22 kW) // 6.000 rpm // flight circle 112 - 250 mm 4. top (22 kW) + chamfering unit // 6.000 rpm // flight circle 112 - 250 mm // counter bearing 5. bottom (15 kW) // 6.000 rpm // flight circle 112 - 250 mm // counter bearing 6. top (22 kW) // 6.000 rpm // flight circle 112 - 250 mm // counter bearing 7. bottom (15 kW) // 6.000 rpm // flight circle 112 - 250 mm // counter bearing 8. universal (11 kW) // 6.000 rpm // flight circle 112 - 200 mm - Spindle diameter: 50 mm - Working width: 20 - 230 mm - Working height: 12 - 160 mm - Feed 22 kW // approx.: 8 - 100 m/min - Year of manufacture: 2003 - ATS system Kdedpfx Aasup Av Derew - Drive for horizontal spindles via toothed belts - 5 driven rollers in the table - Air cushion system in the machine table - Short infeed table with driven 4 rollers - 400 V // 50 Hz

Condition: used, x-travel:600 mm y-travel:fest mm z-travel:650 mm weight of the machine ca.:ges. 0,124 t dimensions of the machine ca.:0,7 x 1,0 x 1,05 m Kedpecxxrgsfx Aarodw surface measuring, testing and evaluating unit for roughness and unevenness parameters with measuring post and feed device, incl. data logger with profile memory and full digital measured-value processing, fully programmable, evaluation according to different evaluation programs with single measuring run, reference-plane measuring on badly aligned, curved and tilted surfaces, automatic correction of height offset and tilt, measuring program with permanent storage and quick access, clearly arranged control elements, universal by plug-in program module for special functions, measuring post PST-Se, large black granite base plate with a 14 mm T-slot, table 650 x 450 mm, PRK feed device, adaptable precision scanning device for roughness, unevenness and form measuring, tracing length 1,5-60 mm, guidance accuracy 2 µm, tracing speed 0,5 and 0,1 m/s, automatically adjustable, return speed 1,5 m/s, standard - interval and terminal contact operation, extensive accessories, exchange calliper, calliper height-adjustable, calliper holder, calliper, etc.

Condition: excellent (used), Year of construction: 2014, 1000mm Swing, 760mm max. machining diameter, 1540mm max turning length, 4000rpm main spindle, 76mm bar capacity, 12000rpm milling 18.5kW, C axis 0.001 degrees, Y axis -/+115mm, 40 station ATC, 12 station lower turret, milling speed 4,000rpm, Kdodpfx Asw I Tnisarjw 22kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant

Condition: good (used), Year of construction: 2012, •Euromac MTX Flex 12 1500/22/ 2500 •A lot of tools included. •Year of construction 2012 •Multitool 6 •Multitool 10 •CE Safety features •Table extensions for 4 meters •Vacuum system • X-axis 2500mm with positioning 10000mm •Y-axis 1500mm MTX flex 12 • 3 Autoindex stations D - 360° pragrammable • 3 Fixed stations D • 6 Fixed stations B with ACTIVE Die System • Direct DRIVE System •Automatic repositioning of the hydraulic plate clamps. • Standard 2 plate clamps • Simple system for loading plates. • Automatic lubrication of the multi-tool and tools • Movable control console • Machine software TPT (TOP PUNCH TOUCH) with 21.5 inch LED touch screen. • Table with brushes • Folding table at the front (L 850) • External cooling system Kdedpfx Aaewk Ntuorsw • UPS system: protects the console PC against voltage drops and guarantees up to 30 minutes of power supply in the event of a power interruption. • Die holder 2 x D, 1 x C, 2 x and 1 x Adapter from B to A • Punch adapter: D/B, D/C, B/A. • Operating instructions (paper and electronic). • Preparation for online service (internet connection required). • USB memory stick. • Electrical preparation for the loading and unloading system.