Low loader semitrailer

GOLDHOFER STZ-H6-57/80A Teleskop-Tieflader Waggontransport

Condition: used, overall weight: 92,000 kg, axle configuration: > 3 axles, first registration: 08/2006, loading space length: 19,000 mm, loading space width: 3,000 mm, loading space height: 815 mm, total width: 3,000 mm, Equipment: ABS, Goldhofer STZ-H6-57/80A telescopic low loader for wagon transport----                                     Approval          Technical 1 Speed:     80km/h                 65km/h Fifth wheel load:               23,000kg               26,000kg Rear axle load:       10,000kg             11,000kg Total weight:     83,000kg               92,000kg Payload:                52,500kg               61,500kg Own weight: (without accessories):           30,500kg ----Gooseneck: Length: 4,000mm Width: 2,480mm Height: 235mm Seat height: 1,350mm DLR front: 1,420mm DLR rear: 2,700mm Todpfolhn Aiox Ac Nef King pin 3.5 inches Bevel: bevelled 10 degrees Corners front: bevelled 45 degrees Floor covering: spruce 50mm Seat supports: mechanical Width with side walls: 2,550mm Hydraulic STZ gooseneck with external supports, hydraulically liftable and lowerable with mechanical downpipe supports and hydraulic support cylinders hydromechanical forced steering (2-circuit steering) in flat design (height 235mm) with adjustable guide elements and THP steering cylinders. ----Loading area: Type: Platform Liftable: no Length: 13,000mm Width: 3,000mm Floor covering: sheet metal/spruce 50mm Wheel recesses: no Wider extensions: no Extendable: simply telescopic Length1: 10,000mm Loading heights (loaded) Loading height 1: 815mm Loading area telescopic, designed as an outer and inner tube construction, with 1,070mm long, fixed loading area section at the front. Bolt-link coupling integrated in the fixed loading area section for coupling boiler bridge extension supports, the square rails welded on by us serve as rail tracks in the track widths 1,000 mm (rail spacing 1,015 mm) and 1,435 mm (rail spacing 1,450 mm). Locking of the extension steps by spring-loaded cylinders and conical bushings Loading area height on the frame center tube (outer tube) approx. 815mm (+/- 130mm) Loading area height on the enclosed rail elements approx. 790mm (+/- 130mm) ----Rear chassis: Chassis type: Standard Loading height: 815mm Width: 3,000mm Wheelbase: 1,360mm Floor covering: Sheet metal Extensions: no Wheel recesses: no Excavator recess: no ----Axles: Number of axles: 6 Lift axle: see accessories Axle type: cranked steering knuckle Axle compensation: hydraulic Axle make: BPW/Eco Driving positions: 1 Axle stroke (1) +/-: 130/130mm Axle stroke (2) +/-: 0/0mm Raising/lowering valve: Yes 1st axle can be suspended pneumatically with lifting bellows ----Steering: Number of steering axles: 6 Steering axle arrangement: all steered Steering angle max: 45° Steering type: Hydr. 2 circles----Tires: Dimension: 235/75 r 17.5 143/141 J Tires. Type: twin Rim type: discs Rim centered: centered ----Brake code: according to EU standard: Yes AGS: Yes ALB: Yes ABS: Yes with ABS del: No Parking brake: spring-loaded EBS: No ECAS: No Remark: Brake calculation no.: GH 4324S ----Chassis remark: Steering designed for the extended state with a larger steering angle of the front axles Open wheel cutouts above the wheels with narrow cross arms in between (ALU covers see accessories below) Control elements protected on the left in the direction of travel Rims 17.5x 6.75 Cranked axles!!! ----Rear of vehicle: Design: Standard 90° Ramp fastening: see accessories Floor covering: Sheet metal Overhang from last axle: 1,300mm Support: see accessories ----Load securing: Lashing rings Number: 5 Loadable up to: 10 tons per piece Arrangement: 2 pairs on the SH                         3 pairs on the LF----Rear extension: Max. load capacity 15,000kg with a

Condition: new, maximum load weight: 29,500 kg, overall weight: 42,000 kg, axle configuration: 2 axles, loading space length: 6,100 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2025, Equipment: ABS, * DOLL panther running gear + 5-year warranty * DOLL tronic operating and control system incl. radio remote control * Hydraulically detachable gooseneck * Reinforced chassis platform * Rear ramps * External main frame * Hydraulic steering * Comprehensive load securing package * Low bed length: 11,750 mm (6,100 mm + 5,650 mm) or 12,400 mm (6,700 mm + 5,700 mm) * Unladen weight: 13,700 kg (+/- 2%) * Optional: extensive range of accessories This semi-trailer is available with a low bed length of 6,700 mm or 6,100 mm and a short delivery time. Images may differ from the original. All information provided without guarantee. Tedpogvr T Hjfx Ac Nef Contact: Tel.:

Condition: used, 3-axle truck trailer, low-bed trailer MÜLLER MITTELTAL type AZP Curtainsider low-bed trailer, low-loader trailer, low-bed trailer for machinery transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Tjdpfjt N Antex Ac Njf Overall height: approx. 4,050 mm Front axle load: 8,000 kg Middle axle load: 8,000 kg Rear axle load: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at platform height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with frame removed and tarpaulin pushed forward) - Spare wheel mounted on the front wall - Separate lifting and lowering of front and rear axles - Middle axle is a lift axle - Drawbar – extendable in multiple stages - Very robust lashing points on the outer frame and in the centre of the vehicle - ALU loading ramps: length 268 cm, width 410 mm, height 130 mm (surcharge 2,000 EUR net) This vehicle was purchased by us as a new vehicle, is first-hand, is registered and currently in use by us. Very good condition.

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized Tedpfx Asrgzv Nsc Njf * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: new, maximum load weight: 29,100 kg, overall weight: 42,000 kg, axle configuration: 2 axles, loading space length: 6,700 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2025, Equipment: ABS, English text below * DOLL panther chassis + 5-year guarantee * DOLL tronic operating and control system including radio remote control * Hydraulically retractable gooseneck * External main frame * Hydraulic steering * Extensive load securing package * Low bed length: 12,362mm (6,700mm + 5,662mm) * Total length: 13,110mm (+5,662mm) * Dead weight: 12,900kg (+/- 2%) * Optional extensive accessories This trailer is also available with a low bed length of 6,100mm and a short delivery time. Images may differ from the original. Information without guarantee. Contact: Tel.: * DOLL panther running gear + 5-Year warranty * DOLL tronic operating and control system incl. radio remote control * Hydraulically detachable gooseneck * Lateral main frame *Hydraulic steering * Comprehensive load-securing package * Low bed length: 12,362 mm (6,700 + 5,662 mm) * Total length: 13,110 mm (+5,662 mm) Todogvhrropfx Ac Nef * Tare weight: 12,900 kg (+/- 2%) * Optional comprehensive equipment This trailer is also available with a low bed length of 6,100mm and a short delivery time. Pictures might be different from the original. Information provided without guarantee. Contact: Phone:

Condition: like new (used), functionality: fully functional, color: orange, maximum load weight: 4,000 kg, Year of construction: 2020, machine/vehicle number: 615035, POTAIN self-erecting crane HUP 40 30 Todswq In Rspfx Ac Njf Serial no.: 615035 Year of manufacture: 2022 Hook height 25.6 m + 30.0 m 40 m outreach 1,000 kg up to 4,000 kg max. Hoist 18 HPL 10 (High Performance Lifting) Trolley 3 DVF 5 Slewing unit HPS 142 (High Performance Slewing) All drives frequency-controlled Galvanized solid mast Permanent 4-strand reeving Height-adjustable supports with plates Auxiliary control console Integrated radio control incl. charger and 2 batteries 20m power supply cable 15 x concrete ballast blocks Hup 40 30 each 1,750 kg

Condition: excellent (used), color: red, Year of construction: 2012, Year of manufacture: 2012 Tedpfx Acjw D E Tdo Nsf Payload: 1,000,080 kg Extendable structure: Yes APK (Periodic Technical Inspection): Valid until 01/2026 Technical condition: Very good Visual condition: Very good GOLDHOFER THP/ MT/ ST 28 HYDRAULIC AXLE WITH 2X GOOSENECKS, 2X POWER PACKS, 2X DRAWBARS + FRONT SECTIONS THP / MT / ST MODULES: 2X 2-AXLE MODULES 2X 4-AXLE MODULES 2X 5-AXLE MODULES 1X 6-AXLE MODULE 2 HEAVY DUTY GOOSENECKS WITH HYDRAULIC POWER PACKS 2X DRAWBAR CONTROL SETS CENTRAL LUBRICATION SYSTEM BPW HYDRAULIC SUSPENSION AXLE 8 TIRES PER AXLE LINE TIRE REMAINING TREAD APPROX. 50% SIZE 215/75 R 17.5 YEAR OF MODULES: FROM 2009 TO 2012 COMPLETE AXLE SET WITH NEW GERMAN TÜV INSPECTION / APK / MOT PERMISSIBLE GROSS WEIGHT 1008 TONS AT LOW SPEED FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: new, maximum load weight: 39,600 kg, overall weight: 55,000 kg, axle configuration: 2 axles, loading space length: 7,500 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2025, Equipment: ABS, * DOLL tronic operating and control system incl. radio remote control * Hydraulically detachable gooseneck * Hydraulic steering Tsdsrd T E Sjpfx Ac Nof * Lateral main frame * Comprehensive load-securing package * Low-bed length: 13,000 mm (7,500 + 5,500 mm) * Optional comprehensive equipment Pictures may differ from the original. All information provided without guarantee.

Condition: new, axle configuration: > 3 axles, Year of construction: 2025, Further information here: Tsdpfov D Abmsx Ac Nsf

Condition: new, maximum load weight: 31,500 kg, overall weight: 42,000 kg, axle configuration: 2 axles, loading space length: 9,700 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 210 mm, Year of construction: 2025, Equipment: ABS, * DOLL panther running gear + 5-year warranty * DOLL tronic control and operating system incl. radio remote control * Additional steering via radio remote control * Position-independent single-track steering EEP * Hydraulic steering Todpegqc Dyefx Ac Nsf * Comprehensive load securing package * Spray galvanization * Stainless steel toolbox * Side wall construction * Reinforced chassis platform * Rear ramp * Extremely low loading height * Low-bed length: 9,200 mm (9,700 mm incl. loading ramps from low-bed to running gear) * Overall length: 16,560 mm * Tare weight: 10,500 kg (+/- 2%) Images may differ from the original. Information subject to change without notice.