Mitre saw / Pull saw

graule ZS 135

Condition: good (used), Year of construction: 1982, Cut-off and miter saw, pull saw, chop saw, panel saw, miter and compound miter saw, radial saw, cut-off, miter and compound miter circular saw, radial arm saw -Manufacturer: Graule cut-off and miter saw type ZS135 -Motor power: 2.2 kW -Speed: rpm -Saw blade: Ø 420 mm, swiveling Rodpfxjyam Uaj Adbsbt -Cutting area: 90° flat 375 x H170 mm -Cutting range: 45° 260 x 170 mm / 365 x 120 mm -Transport dimensions: 1060/835/H1530 mm -Weight: 185 kg

Condition: used, Length 2700 mm Width 1100 mm Height 850 +- 150 mm engine output 0,37 kW Electric capacity 0,5 kw compressed air 6 bar Horizontal impregnation system 'Pro flow' for individual parts with rinsing circuit. ----- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. ----- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blow-off and outlet. Horizontal feed of the workpieces By motor-driven rollers made of plastic with grooves. Electrical converter for controlling and changing the conveying speed. transmission The machine is equipped with an exclusive system so that all Gear located outside the flood chamber and easily accessible to the Operators are to guarantee a longer service life and the to facilitate maintenance operations. The moving components are protected by cover plates and appropriate seals protected. circulation pump Pneumatic double diaphragm pump made with valves, seals and diaphragms Nitrile rubber and housing made of plastic material (PVDF). air jets A blow-off system is present in the first chamber to prevent product leakage avoid. A second blow-off system after the flood chamber blows off the excess product from the workpiece. Electrical panel According to CE, degree of protection IP 55. Including inverter to the set feed rate. technical features Length mm 2700 Rbedpenl Nqqofx Adbst Width mm 1100 Conveyor speed (min./max.) m/min 3-6 Motor power train group kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 +- 150 Min. length of the workpieces to be flooded mm 250 Max. width of the workpieces to be flooded mm 300 Max. height of the workpieces to be flooded mm 250 Compressed air consumption lt/min 2000 Pressure of the required compressed air bar 6 Equipment and available accessories Flushing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))

Condition: new, saw blade diameter 350 x Ø 30/40 mm cutting diameter 135 mm cutting length 430 mm dimensions of saw-blade 350x3,0/2,4x40 mm turning speeds 3800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 100 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60° / 45°), with fixed stop - Compound cut on one side up to 45°, with fixed stop - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Cutting data : - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm Rodsxabqzepfx Adbjbt - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 108 FTZ neg. for aluminum and plastic - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above consisting of: 2x vertical clamping cylinders, adjustable with hand levervalve - 1x machine stand - more powerful drive motor (3.0 kW)

Condition: used, Cutting height at 90°: 135 mm Cutting length: mm Mitre range horizontal: - Mitre range vertical: -60° to +60° Rsdpfx Adsx I Ai Dsbsbt Roller conveyor / support table: no Saw blade diameter: Speed: 2800 rpm Motor power: 2 kW Motor brake: yes Workpiece clamp: yes Spray device: yes Extraction port: 100 mm Machine length: Machine width: Weight: 110 kg

Condition: new, Year of construction: 2024, Circular saws. • For cutting wood with nail residue • Available in various diameters. For more information call us. Redpfxeh Uubds Adbjbt

Year of construction: 2004, condition: good (used), Crosscut and mitre saw, pull saw, crosscut saw, aluminum circular saw, metal circular saw, metal cutting saw, underfloor circular saw with double mitre, aluminum crosscut saw, underfloor saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw -Manufacturer: Graule Type ZS135 -Engine power: 2 kW -Speed: 2700 rpm -Saw blade: Ø 350 mm, pivoting -Cutting area: 90° flat 430 x 135 mm -Cutting area: 45° flat 300 x 135 mm -Transport dimensions: 1150/910/H1200 mm Rsdpfx Aet Hafkedbsbt -Weight: 185 kg with pallet

Condition: excellent (used), Year of construction: 1990, Radial saw ZS135 Rbedpfet Sin Sox Adbjt Year of manufacture: 1990 On stand With pneumatic clamp Hydraulic feed brake Saw blade for aluminium 2 kW / 380 Volt

Condition: used, machine/vehicle number: 007350, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 28 Redewcyd Ijpfx Adbsbt

Condition: used, Year of construction: 1999, Cutting height at 90°: 135 mm Cutting length: mm Saw blade swivel and tilt: yes Rjdpfx Adjxc Hklsbsbt Vertical miter range: -60° to +60° Roller conveyor / support table: no Saw blade diameter: Speed: 2800 rpm Motor power: 2 kW Motor brake: yes Extraction connection: 100 mm Machine length: Machine width: Weight: 110 kg

Condition: new, NEW Description: - Crosscut and miter saw with maximum cutting height of 135 mm - Machines can be mitered in 2 levels - Stable gray cast iron construction - Precise ball bushing guide of the tool carriage on hardened and ground steel shafts - Manual saw feed - Fast miter adjustment up to 25° horizontally and up to 45° vertically - Readjustable fixed stops at 90° and 45° - Lower saw blade guard can be connected to the extraction system Rsdevwf T Sjpfx Adbobt Scope of delivery: Crosscut and miter saw type ZS 135 N without saw blade Technical data: - Motor: 400 V / 2.2 kW - Speed: 3800 rpm - Cutting length: 430 mm - Cutting width: 430 mm at 90° / 300 mm at 45° - Cutting height: 135 mm at 90° / 92 mm at 45° - Miter range horizontal: 45°-90°-25° - Miter range vertical: 90°-45° (tilted to the left) - Saw blade diameter: 350 mm - Extractor nozzle diameter: 100 mm - Weight: 100 kg

Condition: new, Glass bead nailer "2 P Jumbo automatic E.C." - new - Redpfsvnh T Nex Adbebt Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation; With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. ----- Price in this version on request! Plus packaging/shipping ----- Pictures show Clamp corner joining machine 2P inlcuding the option of movable work table (please find details as follows under additional prices) Additional prices: ----- Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugged in 1000 mm long, 2 pieces swiveling and sliding Support bars 1000 mm, support bars covered with felt, 4 swivel castors, 2 of which have a stop device. ----- Additional price: 1.321,00 euros net Brackets: packages 15 mm brackets (package of 2000): Price 22.00 euros 12 mm brackets (package of 3000 pieces): Price 32.00 euros 10 mm staples (package of 3000 pieces): Price 32.00 euros Dimensions and weights ----- Jumbo Automatic E.C 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. plus statutory VAT Ex works plus packaging and shipping (technical data according to manufacturer - no guarantee!)

Condition: used, Year of construction: 2008, fully equipped, with cutting extension to 540 mm incl. HM special blade 350 x 3.5 x 40, 108 trapezoidal teeth flat tooth, negative rake for aluminum cuts used, top condition, low hours Manufacturer: Graule Model: ZS 135 Year of manufacture: 2008 Machine no.: 2008/30/23 CE pattern tested Motor 2 kW Brake motor Cutting height approx. 135 mm Large cutting length extended to approx. 540 mm Blade diameter approx. 350 mm Saw blade bore approx. 30 mm Tiltable right Tiltable left Machine base Roller table right 3000 mm with stop and scale – RLH with handwheel adjustment, pneumatic clamping, and electronic digital display Roller table left 5000 mm, type RO Feed brake Material support made of aluminum Coolant spraying system 2 x pneumatic workpiece clamps right + left Rodpfx Adeww Nd Tjbobt Pressure reducing valve Original price approx. €12,750.00 Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: reconditioned (used), functionality: fully functional, Year of manufacture 1997, connected load 380V 5.2A 2.0kW, saw blade diameter 350 mm, can be swiveled 45° on both sides, height adjustable with hand crank, cutting length 600 mm, extraction connection 100 mm, table height 890 mm, roller conveyor on the right with stop cutting length 3200 mm, roller conveyor on the left with stop cutting length 2200 mm Rbedpfxowhn T Ue Adbjt

Year of construction: 2012, condition: excellent (used), Window production line WEINIG Rbjdpfxjh H Iyxe Adbjt consists of: Unirex 3000 machining center Univar 15 Unitex 15

Condition: new, A German built and designed crosscut saw with a facility for the easy cutting of angled or straight components. A unique feature of the machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Although compact in design the machine gives large cutting capacity. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. Spring return of sawcarriage. 350mm max. sawblade dia. 2KW brake motor. 30-40mm dia spindle dia. 45 - 90 - 25 degree horizontal movement (swivel) Adjustable upper protection 350mm dia TCT sawblade - 72 teeth. Cutting capacity: 350mm x 135mm deep at 90 degrees. 250mm wide x 135mm deep at 45 degrees (swivel). Dust extraction outlet 100mm Working height of table 900mm Rodpfody Hm Eex Adbebt 'N' model with vertical tilting. 90-45 degrees tilt to left. Max capacity 350mm wide x 92mm deep.