Vertical machining center

HAAS DT-1

Condition: like new (used), Year of construction: 2018, operating hours: 502 h, functionality: fully functional, machine/vehicle number: 1154161, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 394 mm, rapid traverse X-axis: 61 m/min, rapid traverse Y-axis: 61 m/min, rapid traverse Z-axis: 61 m/min, feed length X-axis: 508 mm, feed length Y-axis: 406 mm, feed length Z-axis: 394 mm, feed rate X-axis: 31 m/min, feed rate Y-axis: 31 m/min, feed rate Z-axis: 31 m/min, nominal power (apparent): 20 kVA, torque: 46 Nm, controller manufacturer: HAAS, controller model: HAAS NGC (Next Generation Control), workpiece length (max.): 660 mm, workpiece width (max.): 381 mm, workpiece height (max.): 394 mm, workpiece weight (max.): 113 kg, total height: 2,489 mm, total length: 1,626 mm, total width: 2,083 mm, table width: 381 mm, table length: 660 mm, table load: 113 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 15,000 rpm, overall weight: 2,722 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 502 h, coolant supply: 20 bar, distance table to spindle center: 495 mm, spindle motor power: 11,200 W, number of spindles: 1, number of slots in tool magazine: 21, mount diameter: 30 mm, tool length: 127 mm, tool diameter: 76 mm, tool weight: 1,800 g, input voltage: 400 V, type of input current: three-phase, HAAS DT-1 High-Speed Drilling/Tapping Center - Excellent Condition - Only 502 Spindle Hours Exceptionally well-maintained HAAS DT-1 vertical machining center with very low hours. This compact, high-speed machine is ideal for drilling, tapping, and light milling operations in aluminum, steel, and other materials. Full details are available (including all invoices) through a website build for this machine. Machine History: - Built: August 2018 - 2018-2021: Demo machine at Landré (official HAAS distributor Netherlands) - October 2021: Purchased by IMBU BV - 2021-2025: Used exclusively for prototyping - never production work - December 2025: Full service by Landré (service report available) Condition: Outstanding condition for its age. Only 502 spindle hours and 1,764 power-on hours. The machine has been carefully maintained and used only for prototype development, resulting in minimal wear. Installed Options: - 15,000 RPM spindle (11.2 kW, BT-30) - Through Spindle Coolant (TSC) 20 bar with 25 micron fine filter - Renishaw Wireless Probing System (WIPS-R) for tool and workpiece measurement - 4th axis interface with wiring (ready for rotary table) Lhedpfxex E Au Ue Adwjb - 5th axis interface with wiring - High Speed Machining (HSM) - 80 block look-ahead - Dynamic Work Offsets (DWO) & Tool Center Point Control (TCPC) - Programmable coolant nozzle (34 positions) - Automatic chip auger Software Options: Macros, Rotation and Scaling, Rigid Tapping, M19 Spindle Orient, VPS Editing, Media Display, Wireless Networking, Compensation Tables, 1GB Max Memory Technical Specifications: - Travel: X=508mm, Y=406mm, Z=394mm - Rapid traverse: 61 m/min (all axes) - Table size: 660 x 381 mm - Table load: 113 kg - Tool changer: 20+1 side-mount - Spindle nose to table: 102-495 mm - Coolant tank: 208 liters - Machine weight: 2,722 kg - Dimensions (L x W x H): 1626 x 2083 x 2489 mm - Power: 400V 3-phase Machine Data (from controller): - Power-on hours: 1,764 - Spindle hours: 502 - Feed cutting time: 337 hours - Tool changes: 13,803 - Programs completed: 3,896 Included: - Complete machine documentation - All original invoices (machine, tooling, accessories) - Landré service report December 2025 - Renishaw wireless probing system (tool probe + workpiece probe) ALSO INCLUDED: Extensive set BT-30 toolholders (list attached), Ceratizit cutting tools, and Lang Quick-Point clamping system (list attached). Total investment approx. €25,000. Location: Netherlands Reason for sale: Company restructuring All documentation available on website. Inspection welcome by appointment.

Condition: good (used), Year of construction: 2004, Comm. no.: Lg 34522 high performance punching press HAULICK+ROOS ROS 500 - 1250 used, in good condition year of construction 2004 (without sound insulation cabin) with - infinitely variable drive - 2 connecting rods power unit - pneum. Clutch-brake combination - stroke adjustment - screen control Siemens PC 670 - oil circulation lubrication Technical data Pressing force max. 500 KN Stroke rate 30 to 900 min.-1 stroke 12 to 60 mm Installation height (max, stroke un U.T.) 320 mm column width 1.250 mm Table area 1.250 x 730 mm Drop-through opening in table 1,160 x 140 mm ram area 1.250 x 450 mm ram adjustment 60 mm Drive power 26 kW Weight approx. 11,000 kg Dimensions (L x W x H) approx. 2,800 x 1,300 x 3,250 mm Equipment and accessories: Servo roll feeder VAMCO SP 150 Year of manufacture 2014 Ledpfx Adjip Uqmowjhb Passage width max. 150 mm Material thickness max. 3.0 mm

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1127626, table width: 400 mm, table length: 600 mm, Equipment: chip conveyor, Machine from the insolvency of an automotive supplier TECHNICAL DETAILS Table size: 400 x 600 mm EQUIPMENT - Chip conveyor - Tool changer Other auctions from the same location: EBU E 35 Search-ID=19074266 Exner H4SP-200 Search-ID=19074391 HAAS DM-2 Search-ID=19074331 HAAS DT-1 Search-ID=19074411 Hans Schoen SH 200 Search-ID=19074426 Mora Primus 7107 V3 Search-ID=19074526 Rapid DGL 250 Search-ID=19074421 Lsdpowqcqyofx Adwohb Hans Schoen SH 16 Search-ID=19074441 SW Schwäbische Werkzeugmaschinen BA 312 V3 Search-ID=19074456 SW Schwäbische Werkzeugmaschinen BAS 03-11 Search-ID=19074466 Further details according to manufacturer - without guarantee Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Distance spindle to table: 546 mm Spindle speed: 10,000 rpm Tool taper: BT 30 T-slot distance: 125 mm T-slot width: 16 mm T-slot depth: 27 mm Number of slots: 3 Table load: max. 113 kg Tool changer: double gripper Tool diameter: 51 mm Tool length: 178 mm Tool weight: 2.5 kg Tool slots: 20+1 Machine dimensions: approx. 2.6 x 1.7 x 2.6 m Machine dimensions transport: 2.5 x 2.0 x 2.5 m Weight: approx. 2.4 t

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 260 mm turning length: 610 mm facing movement (x-axis): 160 mm longitudinal traverse (z-axis): 610 mm control: Siemens 810D revolution per minute: 1 - 6300 steples U/min max. torque on the spindle: 86 Nm spindle passage: Ø 42 mm external spindle dia. in forward position: Ø 80 mm feed motor: X/Z: 5000 / 7000 N rapid motion - x-axis: X/Z: 16 / 20 m/min tool turret - number of stations: 12 / VDI 30 tailstock taper ISO: MK4 tailstock adjustment: 500 (Hub) mm Main spindle capacity: 7,5 (100%=11kW) kW electrics - voltage/frequency: 3/PE ~ 400V und 50/60Hz V/Hz total power requirement: 20 kVA (11 kW) Weight approx.: 4,0 t dimension machine xH: 3,0 x 2,0 x 2,1 m Ledpfxsu Ixwio Adwehb Further technical specifications: C-axis Distance main spindle - tailstock: 805 mm Power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Coolant device, coolant supply via tool turret Switch cabinet with cooling, Rittal type SK3393100 Workpiece collecting tray Machine lighting Accessories: 1x driven tool i.D. *

Condition: used, Year of construction: 1998, machine/vehicle number: 10870, Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 64 mm Free frontal opening L-R: 1100 mm Free lateral opening F-B: 250 mm Table surface area : 1080 x 650 mm Slide area: 980 x 420 mm Hole in table: 1060 x 200 mm Number of strokes: 100 - 750 s.p.m. Required power: 22 kW Lhedpsuqd Abefx Adwsb Working hours machine: 16850 h Height over floor approx.: 2471 x 1278 x 3150 mm Weight of machine approx.: 9 ton Standard configuration BRUDERER precision roller feed BBV 205 / 120

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Lhodpfxjk Hz Nqe Adwsb Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Control : D.Electron Z 32 centre height 220 mm Centre distance 1000 mm turning Ø over bed 440 mm turning diameter over slide 245 mm Travel -Z axis 750 mm width of lathe bed 320 mm spindle mounting CL 6" spindle bore 62 mm spindle speeds 0 - 2000 rpm rapid traverse X/Z 7 m/min Lhjdpfxsd Sitko Adwsb quill travel by hand 200 mm quill diameter 80 mm quill mounting MK 4

Condition: excellent (used), Year of construction: 2011, EMCOturn E45 CNC lathe with C-axis Year: 2011 turning diameter 220 mm turning length 310 mm control Siemens 828D turning diameter over bed 430 mm spindle bore 45 mm spindle tunring speed 6.300 U/min x-travel 160 mm z-travel 310 mm number of tool places 12 Positions C-axis driven tools total power requirement 17 kW Transport dimensions ca. 3,3 x 1,5 x 1,95 m machine weight ab. ca. 3.300 kg Accessories/options: - C-axis and driven tools - driven tool holders axial and radial Ledpfexvcrxox Adwjhb - static tool holders - documentations - backup - footpedal - tailstock - parts cather - 3-jaw hydraulic chuck - coolant tank Runned hours: 8173 Under power in our warehouse!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 810 mm, turning diameter over cross slide: 800 mm, turning diameter: 320 mm, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, CNC FANUC MSX-701 / MAPPS IV CAPACITY Swing diameter over bed: mm 800 Swing diameter over cross slide: mm 800 Maximum turning diameter: mm 320 Standard turning diameter: mm 200 Maximum distance between the center: mm 1.130 Maximum turning length: mm 810 Maximum workpiece size: mm 300 TRAVELS X axis turret 1 and 2: mm 210 Y axis turret 1 and 2: mm +65 / -45 Z axis turret 1 and 2: mm 810 B axis headstock 2: mm 920 MAIN SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 SUB SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 Lhsdpfxjwlvlgo Adwob C-axis resolution: degrees 0,001 FEED DRIVES Rapid traverse turret 1 X/Y/Z: m/min 30/20/50 Rapid traverse turret 2 X/Y/Z: m/min 30/20/50 TOOL TURRET Number of turrets: 2 Number of tool stations per turret: 16 Shaft cross – section for turning tools: mm 20 x 20 Maximum shaft diameter for boring bars: mm 32 Turret switching time (1 station): s 0,18 Maximum speed of the driven tools: rpm 6.000 Drive power for driven tools (5 min/continuous operation): kW 7,5/5,5 DIMENSIONS Installation area with chip conveyor: mm 5.120 x 2.720 Net weight: kg 8.300 Macchina equipped with: • High pressure cooling system • Bar loader interface • Gantry-type piece unloading arm • Cutting effort management system and load monitor • No. 1 double radial motorized tool holder • No. 3 axial motorized tool holders • No. 2 external tool holders • No. 2 double boring bar holders • No. 2 single radial motorized tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centering chucks diam. Mm 210 • No. 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration Year of manufacturing: 2010

Condition: used, Year of construction: 2015, controller manufacturer: Hurco, controller model: MAX5, _____ Description: Year of manuf. : 2015 Control : Hurco MAX5 Speed : 10000 rpm Movement X/Y/Z : 762/508/610 mm Tool holder : SK 40 In General: Year of manufacture:2015 Control system:Hurco MAX5 Travel X/Y/Z:762/508/610 Speed:10,000 rpm Spindle: Technology:Belt spindle Speed:10,000 rpm Tool holder:SK 40 Work table: Clamping surface:1,020 x 510 mm Maximum table load:1,300 kg : Tool magazin: Technology:Drum magazine Tool changer:Double gripper Lhedjxz I A Hjpfx Adweb Number of stations:24 Max. tool diameter:81 (120) mm Max. tool length:300 mm Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system NC rotary table:4th axis (A-axis) Tool magazine:30 stations Tool measurement:Renishaw measuring probe