Flatbed / cycle lathe

Haas TL-2

Condition: good (used), Year of construction: 2006, Description: Gsdpfszlhvzex Akaeug The machine is in good technical condition, and can be tested upon prior arrangement. Control system: Haas CNC. Maximum turning diameter: 406 mm / 16". Maximum turning length: 1,219 mm / 48". Distance between centers: 1,219 mm / 48". Swing over carriage/cross slide: approx. 282 mm / 11.1". X-axis travel: 203 mm / 8". Z-axis travel: 1,219 mm / 48". Spindle: A2-6. Spindle bore: 76.2 mm / 3.00". Spindle speed: 0–2,000 rpm. Spindle power: 12 HP / approx. 8.9 kW. Torque: approx. 203 Nm at 150 rpm. Chuck: typically 10" / 254 mm. Tailstock: manual, depending on configuration. Weight: approx. 2,087 kg. Machine dimensions: approx. 2,515 × 1,727 × 1,981 mm (operating dimensions). Electrical connection: 195–260 V, 3-phase / approx. 25 A or 1-phase 240 V / 40 A, depending on configuration.

Condition: excellent (used), Year of construction: 2008, CNC Lathe with c-axis MAZAK - QUICKTURN NEXUS 250-IIM MACH-ID 9490 Make: MAZAK Type: QUICKTURN NEXUS 250-IIM Control: Mazatrol Matrix Nexus Year: 2008 Gsdpfjyz Stlsx Akaoug Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1990, condition: ready for operation (used), Two nearly identical Maho milling machines, one with and one without a tool changer, as well as a complete range of accessories/spare parts, are available. Travel X/Y/Z: 600mm/450mm/450mm, tool holder: ISO40, quill stroke: 80mm, spindle speed: 5000rpm, feed rate: 4m/min, rapid traverse: 6m/min. Tool diameter: 130mm/100mm, max. tool length: 250mm, max. tool weight: 6kg. Machine dimensions: approx. 3150mm/3750mm/2150mm, weight: approx. 3600kg. Documentation available. On-site inspection possible. Gjdpexu I Atsfx Akajug

Condition: excellent (used), bore depth 500 mm spindle speed: 1 Godpfx Aoxx A D Tokajug

Condition: used, Year of construction: 2014, operating hours: 7,500 h, 5-AXIS MACHINING CENTER BRAND: HAAS VF-3 SS YEAR OF FIRST INSTALLATION: 2014 TABLE DIMENSIONS: 1,219 mm x 457 mm MAXIMUM TABLE LOAD: 800 KG Gedpfx Aozminnjkajug TRAVEL: X: 1,016 mm Y: 508 mm Z: 635 mm SPINDLE SPEED: 12,000 RPM TOOL MAGAZINE: 40 POSITIONS HIGH PRESSURE / INTERNAL SPINDLE COOLING RENISH PROBE PRESETTING ADJUSTABLE COOLANT NOZZLE

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25.4 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 5 GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2270 x 1650 [mm] - Machine height : 2200 [mm] - Machine weight : 3500 [kg] MACHINE HOURS - Number of working hours : 80490 [h] Gsdpfx Aouha Ugekasug EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5,S6 - Rotating guide bush - Parts catcher - Ejection of workpiece - Chips conveyor - Coolant tank * with high-pressure pump - Bar loader : ROBOBAR SBF 532 - Oil mist extractor - Cooling unit

Condition: good (used), Year of construction: 1999, CONFIGURATION, ARCHITECTURE: PARALLEL LATHE Gusdpfxoyhrnuj Akajg GUIDANCE: PRISMATIC, 3 WAYS THE CARRIAGE CAN MOVE WITHOUT INTERFERING WITH THE TAILSTOCK AND STEADY RESTS, ESPECIALLY SUITABLE FOR SHAFTS DISTANCE BETWEEN CHUCK AND TAILSTOCK: 6000 mm CHUCK DIAMETER: 1000 mm SWING OVER BED: 1020 mm TURNABLE DIAMETER: 700 mm BED WIDTH: 900 mm LOAD CAPACITY BETWEEN CHUCK AND TAILSTOCK: 12,000 kg 4-POSITION AUTOMATIC TOOL TURRET: YES MOTORIZED TAILSTOCK: YES SPINDLE SPEED: 1–720 rpm CONTROL (BRAND/MODEL): SIEMENS 840 D POWER LINE AIR CONDITIONING IN ELECTRICAL CABINET: YES CHIP CONVEYOR: YES, DRAG-TYPE, NEW IN 2021 EXTRAS OPEN STEADY REST: 2 UNITS CLOSED STEADY REST: 1 UNIT INSTALLED MACHINE DIMENSIONS (L x W x H): 14 x 3 x 2.5

Condition: good (used), Year of construction: 2005, operating hours: 32,870 h, functionality: fully functional, machine/vehicle number: 6030578, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, We offer for sale Traub TNL26K automatic cnc lathe. Machine is connected to power and can be inpected every time by prior appointment. Year of built: 2005 Spindle passage 32mm Main spindle: 6.7/10.7kW; 8000rpm Counter spindle: 6.7/10.7kW; 8000rpm Upper turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24kW Barfeeder: FMB Turbo 5-42/4200mm Swarf conweyor: Knoll 240 S1/100 Coolant Kompaktbandfilter: Resy Machine is sold with a lot of toolholders not driven and driven - list on attached photo. Gujdpfevldx Aox Akaeg

Condition: ready for operation (used), Year of construction: 2016, number of axes: 3, This 3-axis DMG MORI CMX 600 V was manufactured in 2016, featuring a 4th axis rotary table preparation, Siemens 840D control, and SK40 spindle. It includes advanced probing systems for both workpiece and tools, ensuring precision. Ideal for those looking to enhance their machining capabilities with reliable equipment. Contact us for more information about this machine. • Basic machine with main‑drive options • Preparation for rotary table (4th axis), EA 510L (rotary table itself not included) • Safety measuring system for X/Y/Z axes • Signal lamp, 4‑colour standard • PROGRESSLine & Planolight • Signs language: Hungarian • Screen text: German/Hungarian • Documentation: Doc 1 & Doc 2 (HU); Electrical circuit diagram (DE) • Misc.: Preparation for machine handover; internal rebuild unit ID 34; inspection & preparation noted Additional equipment • Chip conveyor with ICS (internal coolant) + chip tank (Production Package 1) • Workpiece probing system TS 649 (on table) Gsdpfxex D Di Us Akasug • Tool probing system TT140 • Lamp inside tool magazine • Tool loading through magazine door • Platform/foil machine base • NetService remote service (ID 2632226)

Condition: like new (used), Centerless grinding machine ESTARTA 301 CNC Gsdpfxsxfqzms Akasug