Vertical machining center

Haas VF4SS

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, overall weight: 6,260 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS was manufactured in 2023. It features an impressive X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine includes a robust table size of 1,321 x 495 mm and a maximum table load of 794 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining centre we have for sale. Contact us for further details. Nedpfezwffkox Ad Ijwk • Condition: Like new, used • Functionality: Fully operational • Operating hours: 3,363 h • Spindle/machining hours: 2,402 hTravels • Spindle nose to table: 107–742 mmSpindle • Maximum spindle torque: 122 Nm at 2,000 rpm • Spindle drive: Inline direct drive • Spindle taper: CAT40 • Number of spindles: 1Table • Table dimensions: 1,321 × 495 mm • Number of T-slots: 5 • T-slot width: 15.9–16 mmTool changer • Tool capacity: 30+1 positions • Tool-to-tool time: approx. 1.8 s • Chip-to-chip time: approx. 2.4 sMachine dimensions and weight • Note: Dimensions in the original ad were incorrectly stated in millimetres instead of centimetres. • Export shipping dimensions without conveyor: 3,330 × 2,330 × 2,570 mm • Export shipping dimensions with chip conveyor: approx. 4,140 × 2,330 × 2,570 mm • Advertised machine weight: approx. 6,200 kg • Official weight with conveyor: approx. 6,260 kgInstalled options • Through-Spindle Coolant (TSC), 300 psi / 21 bar • Renishaw Wireless Intuitive Probing System (WIPS) • High-Speed Machining (HSM) • Programmable coolant nozzleElectrical • 400 V, three-phase power supply Additional equipment • Chip auger • Haas Chip Lift (chip conveyor) • Coolant mist condenser • Probe riser block • Approximately 15 tool holders • Documentation and manuals

Condition: good (used), Year of construction: 2025, Universal machining center Machine type: DMG Mori DMX 60 U Control: Siemens Sinumerik One mit Celos X Year: 2025 SPECIFICATIONS Amount of controlled axes: 3+2 X-Axis: 600 mm Y-Axis: 600 mm Z-Axis: 510 mm B-Axes: -15°/+110° C-Axis: 360° Rapid motion: (X/Y/Z): 42 m/min. Nwodpfx Adozu R D To Ijk Spindle speeds: 20 -15.000 rpm Spindle power: 20 / 14,5 kW Torque: 121 Nm Tool: SK 40 Tool capacity: 60 NC-panning and rotary Table Table size: 630 x 500 mm Equipment Chip conveyor Production Package Internal cooling: 40 bar Cooling tank: 600 l paper band filter Electronical handwheel Direct linear scales Preparation for Hydraulic and Pneumatic Connections Air blow Oil mist separator Caliper: Renishaw PP40 3D-Touch probe: 3d quickSET Working mode: 4

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1183016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, workpiece length (max.): 1,270 mm, workpiece width (max.): 635 mm, workpiece height (max.): 508 mm, workpiece weight (max.): 794 kg, table width: 475 mm, table length: 1,321 mm, overall weight: 6,033 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 2,240 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, MACHINE Vertical machining center, HAAS, VF-4SS STANDARD EQUIPMENT: CNC control, 4 axes, HAAS type (NGC version), compatible with Fanuc, ISO programming, G-codes ISO40 spindle taper, CT type 1 GB memory capacity 15" LCD monitor, touchscreen and USB port Ethernet + WiFi network card Early voltage drop detection module (prevents the effects of voltage drops) HaasConnect – remote monitoring of machine operating status via the Internet, VNC and DPRNT protocol Program restart – ability to start the program from any block RunStopJogContinue – ability to move the tool without interrupting the program SafeRun – active anti-collision system (minimizing the effects of collisions) Electronic handwheel Spindle cooling system Temperature compensation for ball screws Protective cabin with sliding front doors and side windows Side magazine with 30 positions Nwjdpozt Nlmjfx Ad Ijk Memory lock Spindle taper air blow system Thread cutting without a compensating chuck (rigid) Installation for connecting compressed air Cooling system with a pull-out coolant tank, filled with coolant Automatic central lubrication system Machine tool lighting "Guns" for air and coolant (mounted on the front of the machine) 4AXD – Machine preparation / connections, wiring / For connecting the table, without a table AUGER – Screw chip conveyor HSM – Faster processor with look-ahead function, accelerating the machining of shapes with 3-axis interpolation ACF – Additional 25 μm filtration system, essential for machining cast iron, aluminum, wood, and phenol-based and other dusty materials TSC* – Through-spindle cooling, pump with increased power /21 bar, 22 l/min/ (ACF option required) WIPS-R – Renishaw probe set, wireless, for measuring tool radius and length, for measuring and setting using (graphic) measuring cycles. SO – Spindle orientation MACRO – Parametric programming COORD – Scaling and rotation of the coordinate system VPS (Visual Programming System) – graphic machining cycles, expansion and creation of custom cycles

Condition: good (used), Year of construction: 2016, functionality: fully functional, HAAS VF-4SS – CNC vertical machining center, 4th and 5th axis, TSC We are offering for sale a high-speed vertical machining center, the HAAS VF-4SS, equipped with a Haas 4th and 5th axis and through-spindle coolant (TSC). The machine is in regular operation and is serviced regularly by Teximp. Inspection and testing of the machine in operation are possible. Technical specifications: Manufacturer: HAAS Automation Model: VF-4SS Serial number: 1142915 Date of manufacture according to the nameplate: 09/2016 Commissioned: 2017 Travel in X / Y / Z: 1,270 / 508 / 635 mm Working table dimensions: approx. 1,320 × 457 mm Max. table load: approx. 794 kg Spindle taper: CT40 / ISO 40 Max. spindle speed: 12,000 rpm Spindle power: up to approx. 22.4 kW / 30 HP Rapid traverse: up to approx. 35.6 m/min CNC control: HAAS Nwedpszvhybofx Ad Ijk Power supply according to the nameplate: 440 V / 3 phases / 50–60 Hz Equipment: HAAS 4th and 5th axis two-axis rotary tilting table Haas through-spindle coolant – TSC automatic tool changer Super Speed high-speed version coolant and flushing of the work area fully enclosed work area The machine is regularly used in production and serviced by the authorized service partner, Teximp.

Condition: used, Year of construction: 2013, x-travel 400 mm y-travel 400 mm z-travel 375 mm weight of the machine ca. 7150 kg Nsdpfxsy Nd U Ro Ad Iowk

Condition: like new (used), Year of construction: 2023, operating hours: 3,363 h, functionality: fully functional, machine/vehicle number: 1201414, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, total height: 257 mm, total length: 333 mm, total width: 233 mm, table width: 495 mm, table length: 1,320 mm, table load: 794 kg, rotational speed (min.): 12,000 rpm, overall weight: 6,200 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 2,402 h, spindle motor power: 22 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We have two machines: SPECIAL PACKAGE PRICE – €125,000 FOR BOTH MACHINES Haas VF-3 YT50 (Ad ID A22113533) + Haas VF-4SS (Ad ID 22522747) Purchase both machines together for €125,000. Excellent opportunity to acquire a complete Haas machining package. • Haas VF-4SS • Taper CAT40 • Spindle: 12,000 rpm Inline Direct Drive • TSC (Tool Side Center) • Renishaw WIPS (Wireless Inspection Probe System) • High-Speed Machining • Mist Condenser Nwodpfxoztm N Ns Ad Ijk • Chip Conveyor • 30 ATC (Automatic Tool Changer) • Cutting Hours: 2,402 hours • Cycle Hours: 3,363 hours • First owner (company) • Complete service history • Maintenance performed by authorized service provider Teximp d.o.o. • No crashes or major repairs • + Approximately 15 tool holders • Company-owned machine, located in Croatia • Immediately available • Operational and available for inspection • Ready for immediate production

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,403 h, functionality: fully functional, machine/vehicle number: 1201414, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,270 mm Travel range Y-axis: 508 mm Travel range Z-axis: 635 mm Spindle speed: 12,000 rpm Nedpfxjzl Rzye Ad Iowk Tool interface: CAT40 Tool positions: 30 MACHINE DETAILS Operating time: 11,136 hours (as of July 26, 2026) Machining hours: 2,403 hours (as of July 26, 2026) Cycle hours: 3,364 hours (as of July 26, 2026) EQUIPMENT Internal coolant supply Renishaw intuitive wireless probe system Mist collector Chip conveyor Approx. 15 tool holders

Condition: ready for operation (used), Year of construction: 2014, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis HAAS UMC-750 was manufactured in 2014. It features a 12000 rpm spindle, a 40+1 tool changer, through-spindle coolant at 21 bar, and a conveyor. High-speed machining capabilities are enhanced with programmable coolant and Dynamic Work Offsets/Tool Center Point Control. It also includes Renishaw probes and a robot interface. If you are looking to get high-quality milling capabilities consider the HAAS UMC-750 machine we have for sale. Contact us for more information about this machine. • Tool changer: 40+1 tools (CT as provided) • Through‑spindle coolant (TSC) 21 bar • Air through spindle • High‑Speed Machining • Programmable coolant nozzle (P‑Cool) • DWO/TCPC • Auto Door • Side window • Top roof/enclosed top Additional equipment • Chip conveyor • Renishaw probes (probing system) • Robot interface Nwedpfxsx Imttj Ad Iek

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis HAAS VF-4SS was manufactured in 2019. It features an X-axis travel of 1270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine is equipped with a spindle speed of 12,000 rpm and includes a chip conveyor, coolant filtration system, and a 4th axis drive. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining centre we have for sale. Contact us for further details. • Spindle nose to table (max): 742 mm Nwedpfx Adeza A Eno Ijk • Distance spindle nose to table (min): 107 mm • Through-spindle coolant: Yes • Programmable coolant nozzle: Yes • Rigid tapping: Yes • Visual part programming system: Yes • Ethernet interface: Yes • Remote monitoring: HaasConnect + HaasDrop • Electronic handwheel with touchscreen: Included • Coolant filtration system: Included • 4th axis drive and wiring: Included • Air blast through spindle: Included • Coordinate rotation and scaling: Included • Tool presetting arm: Included • Working light: Included • Standard memory: 1 GB • Machine orientation: Vertical • Installation and basic training: Included • Warranty: 12 months Additional equipment • Chip conveyor: Auger type • HRT210 Rotary Table (CNC rotary table) • Servo drive: Sigma 5 • Manual tailstock: 6" • Compatibility noted: VF-4SS

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS vertical machining center was manufactured in 2008. It features a 1270 × 508 × 635 mm travel range, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine includes a 40 + 1 position tool changer and a high-speed machining package. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4SS machine we have for sale. Contact us for more information. • Distance spindle–table: 102 mm • Tool holder taper: CT40 (DIN 69871) • Max cutting feed: 20.5 m/min • Rapid feed (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/Features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions Nedpfx Adex D Irme Iowk • High-speed machining package Additional equipment • Screw-type chip conveyor • Auxiliary high-pressure filtration system

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand HAAS Model Sigma 5 Main Drive Nwodpfx Adex H Uz Nj Iok Number of axis 2 This HAAS TR160 with Sigma 5 was manufactured in 2016. It features a 2-axis table and is equipped with a Sigma 5 servo motor, ensuring precise and efficient operation. Ideal for those looking to enhance their machining capabilities. Contact us for more information. Application Types Other Machine Tools

Condition: ready for operation (used), Year of construction: 2015, operating hours: 7,100 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, table load: 794 kg, TECHNICAL DETAILS Travel X: 1,270 mm Travel Y: 508 mm Travel Z: 635 mm Rapid traverse speed X/Y/Z: 35.6 m/min Distance spindle nose to table max.: 742 mm Distance spindle nose to table min.: 107 mm Max. spindle speed: 12,000 rpm Spindle drive power: 22.4 kW Table dimensions: 1,321 x 495 mm Max. table load: 794 kg Tool changer positions: 24+1 Max. tool weight: 5.4 kg Nwodpfextbtisx Ad Isk Tool change time: 1.8 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 3,000 x 2,500 x 2,600 mm Weight: approx. 6,800 kg Cycle start time: approx. 10,100 h Feed time: approx. 7,100 h EQUIPMENT Haas control with synchronous tapping Wireless probing system Coolant system with programmable coolant nozzle Spiral chip conveyor

Condition: ready for operation (used), Year of construction: 2012, operating hours: 18,699 h, functionality: fully functional, machine/vehicle number: 1095132, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, table width: 457 mm, table length: 1,321 mm, TECHNICAL DETAILS Travel X-axis: 1,270 mm Y-axis: 508 mm Z-axis: 635 mm Table Length: 1,321 mm Width: 457 mm Max. load: 794 kg Spindle Speed: 12,000 rpm Drive system: Inline Direct Drive Power: 22.4 kW Max. torque: 122 Nm at 2,000 rpm Feeds Rapid traverse X / Y / Z: 35.6 m/min Max. cutting feedrate: 21.2 m/min Tool Changer Capacity: 24+1 Type: CT 40 Max. tool diameter: 76 mm Tool-to-tool time: 1.6 s Chip-to-chip time: 2.2 s Njdpfx Adoxb Uhie Ijwk MACHINE DETAILS Dimensions Height: 3,023 mm Width: 3,886 mm Depth: 2,667 mm Operating Hours Cycle start time: 18,699 h Power-on time: 23,179 h EQUIPMENT 40 + 1 position tool changer, BT40 High-pressure spindle coolant 63 bar (TSC 1000) Coolant tank 360 liters Chip conveyor, spiral type 4th axis HRT 210, 210 mm including tailstock Wireless Intuitive Probe System (WIPS R) Renishaw OTS tool setter Renishaw measuring probe Intuitive Programming Screen (IPS) Programmable coolant nozzle (P-Cool) Approx. 15 tool holders

Condition: used, Year of construction: 2017, operating hours: 45,000 h, functionality: fully functional, machine/vehicle number: 17L5M0045, turning length: 490 mm, turning diameter: 395 mm, spindle bore: 61 mm, travel distance X-axis: 235 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 105 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 10 m/min, rotational speed (max.): 6,000 rpm, total height: 2,085 mm, total length: 2,790 mm, total width: 1,752 mm, overall weight: 4,150 kg, The lathe was primarily used for the production of spacers, distance sleeves, and other stainless steel fasteners. It has always been operated by professionals and professionally maintained. Nodpoxylzdofx Ad Ijwk

Condition: good (used), Year of construction: 2010, X Y Z: 1270 x 508 x 508mm, table 1324 x 457mm, 12000 rpm, BT 40, HAAS Control, 24 Station ATC, 40HP, chip auger, coolant, Nwjdpfx Adjxpw Rvo Iek Haas TR210 5 axis trunnion table