Used bulk feeders / bulk conveying equipment for sale (43)

Condition: used, 10-meter conveyor belt, width 0.55 m, inclination angle adjustable hydraulically. Ijlhewz Nu Tsccqnoba

Condition: ready for operation (used), Year of construction: 2013, A lifting, tilting, and sorting system for bulk materials within grid boxes is available. The system lifts the grid boxes approximately 3-4 meters high, tilts them into a transport vibrator, and the parts are then provided to the sorting system in a reduced quantity (feed rate regulation). Load capacity: 1000kg, pressure: 140bar. Documentation available. On-site inspection is possible. Expected to be available from the end of 2024. Ibslhjuxdhhsccqnoa

Condition: ready for operation (used), There are 15 identical loading systems available. Product-contact parts made of stainless steel 1.4301, outlet diameter: 400mm, nominal diameter: DN 300, extended length: 5237mm, retracted length: 1252mm, telescopic length (stroke): 2885mm, max. loading capacity: approx. 50t/h, connected load: 0.55kW, weight: 245kg. An on-site inspection is possible. Ielhccey Tn Ngsqnsba

Condition: used, functionality: fully functional, screw conveyor length: 5,000 mm, pump capacity: 1,000 l/min, For sale is a flexible screw conveyor for bulk materials, with a 5-meter hose length, a three-phase motor, and a reduction gearbox. The unit does not operate within a rigid pipe but rather within a flexible plastic hose, making it easily transportable, versatile in use, and gentle on the material being conveyed (low dust and noise generation). Ijlhccqszrzklsnoba We purchased the unit used and tested it briefly. It proved unsuitable for our specific material (too moist for this hose type) but was always fully functional and ready for use. It is ideal for dry, free-flowing bulk materials such as grain, pellets, or sawdust/wood dust. It is not suitable for wood chips (too coarse/irregular for the hose). Equipment: - Flexible hose with a conveying screw made of spring steel - Inlet with protective grid and slide gate - Drive located at the top, with a three-phase motor and a flange-mounted reduction gearbox - Easily transportable, universally applicable - Connection cable with switch (6m) Technical data: Parameter Value Overall length 6 m Hose length 5 m Hose inner diameter 75 mm Smallest bending radius in operation approx. 1.5 m Conveying height up to approx. 3 m Conveying capacity approx. 1,000-1,200 kg/h (for grain) Motor Three-phase motor 400V / 0.75 kW Connection cable 6 m, with switch in the middle of the cable Plug CEE 5x16 (16A) Weight 42 kg Packaging dimensions (with pallet) 120 x 120 x 35 cm Scope of delivery: 1x Screw conveyor with gearbox and motor 1x Connection cable with switch Condition: Used, very little use, fully functional. No defects; simply unsuitable for our specific (too moist) material. Location: 6064 Kerns (self-collection; transport can be arranged).

Year of construction: 2022, condition: as good as new (ex-display), Log cleaner Screen sifter, log cleaner for cleaning and sorting firewood. Ielhcoci U I Necqnoba Firewood cleaner, wood sifter.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SCC, warranty duration: 12 months, volume flow: 45 m³/h, screw conveyor length: 6,000 mm, type of input current: three-phase, screw diameter: 323 mm, input voltage: 400 V, rotational speed (max.): 240 rpm, rotational speed (min.): 140 rpm, Custom-manufactured to order. Send us your diameter, length, and installation angle — receive a full technical quote within 24 hours. INOTEK SCREW manufactures heavy-duty SCC-type cement screw conveyors for bulk material handling in cement plants, dry mortar facilities, fly ash transfer, lime and gypsum processing lines. Based in Ankara, Turkey, we have supplied equipment to over 40 countries with full export documentation and ISO 9001:2015 certified production. KEY SPECIFICATIONS: - Diameter: Ø114 / Ø168 / Ø219 / Ø273 / Ø323mm – any size made to order - Drive speed: 140 / 200 / 240 RPM - Motor power: 1.5 kW to 22 kW (IE2 efficiency class) — Siemens motors standard - Material: Carbon steel S235/S355 standard | AISI 304/316 stainless steel on request - Screw flights: cold-rolled, 3–10mm thickness - Orientation: horizontal, inclined (up to 45°), or vertical - Custom inlet/outlet: conical, square, or rectangular - Surface treatment: primer + epoxy topcoat standard | hot-dip galvanizing on request CAPACITY BY DIAMETER (approximate, horizontal, cement powder): - Ø114 mm → 4–8 m³/h - Ø168 mm → 10–18 m³/h - Ø219 mm → 20–30 m³/h - Ø273 mm → 30–40 m³/h - Ø323 mm → 40–55 m³/h All values depend on RPM, inclination angle, and material bulk density. Custom diameters and capacities available on request. APPLICATIONS: Cement | Fly ash | Limestone powder | Dry mortar | Gypsum | Clay | Silo filling & emptying | Batching plants | Asphalt facilities WHY INOTEK: ✔ CE marked — compliant with EU Machinery Directive 2006/42/EC ✔ ISO 9001:2015 certified factory ✔ 12 months warranty — replacement parts shipped internationally ✔ Exported to 40+ countries – full documentation (packing list, EUR.1, certificate of origin, test reports) ✔ Trusted by: Coca-Cola | Unilever | Anadolu Efes | Limak Holding | OYAK | Cengiz İnşaat ✔ 20–35% more competitive than equivalent European pricing ✔ Production lead time: 3–5 weeks from drawing approval PRICING REFERENCE: Entry-level unit Ø114mm — from €1,500 EXW Ankara. All diameters, lengths, and configurations quoted within 24 hours. REQUEST A FREE QUOTE WITHIN 24 HOURS: Send us your required diameter, length, material type, and installation angle – we return a full technical offer and delivery schedule. Iolsyq H Iuohccqneba Distributor and OEM partnerships welcome. Contact us to discuss exclusive regional agreements.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, DMN-WESTINGHOUSE PTD plug-type deflectors are specially designed for conveying powder and pellets with minimal degradation in pneumatic conveying systems. PTD plug type baffle is used in chemical, pharmaceutical, plastic, food and other related industries. The smooth passage of products is guaranteed by precision machining, good sealing and completely unobstructed passage. The user-friendly, foolproof design enables quick in-situ internal inspection, cleaning and replacement of seals if necessary. The PTD design complies with all applicable workplace safety legislation. Consequently, there are no moving parts on the outside. Iolhccjmgb Hheqnoba Pressure up to 3 bar g with static seals PTD 80 Aluminum housing, tube stainless steel Ø 76.1 x 2.0 mm Pneumatic operation 5/2 with two-way valve 2 coils 24 V DC With 2 inductive limit switches

Condition: excellent (used), Year of construction: 2003, Feeder Caps 8006 automatic disc feeder, sorting machine Fully automated, variable dosing speed, manual height adjustment. Stainless. Year of production: 2003 Power: 0.55kW max. dosing capacity: approx. 1000 pcs / min Diameter: 1400mm Siemens control. Ibslhceg Rkwmscqnea Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: used, Name: Spiral conveyor with spiral Manufacturer: PURATEX Anlagetechnik GmbH Type: SS D 280 R / 6150 Year built: 2008 Speed: 28 rpm Trough diameter: 280 mm Conveying length: 6150 mm Screw diameter: 240 mm Conveying / dosing of: Sewage sludge or similar sludge Driving force: 3 kW Flow rate: 3 kW Dimensions: L 6.600 x W 400 x H 1.600 mm Empty weight: 800 kg Technical doc.: Yes Ibjlhsrpmgfoccqnoa Message: Trough made of stainless steel and spiral made of normal steel, Pitch angle 22°, Throughput of sewage sludge 1.5 - 2.0 m3 /h Accessories: Slewing ring (swivelling) Condition: Second hand Price: On demand

Condition: used, Magnetic conveyor belt, magnetic sliding conveyor, DGS System GmbH Z-conveyor, sliding belt system, conveyor belt, magnetic belt conveyor Type No.: MBF 326P31.75 Item No.: 44489-10 Year of manufacture: 2017 Belt width 300 mm Ibjlei Huzxshccqnsa Distance between permanent magnets 250 mm Insertion length approx. 3400 mm (up to the modular frame) Insertion length approx. 3900 mm (without the modular frame) Insertion height 210 mm Insertion width housing 370 mm Insertion width threaded inserts for adjustable feet 410 mm Insertion width at the modular frame 470 mm Conveying height – discharge height approx. 1040 mm Conveying speed approx. 2 meters/min. Motor power belt drive 0.37 kW Mains connection 400 volts, 50 Hz - Continuous chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Very good condition

Condition: good (used), D-1035-Double bulk feeder with weight Used Stainless Steel double bulk feeder with weight. Dimension: Vat L 1800 X W 850 X H 1300 mm Ibslhen Nxqwsccqnoa Bigger belt: 460 mm, Small belt 100 mm, flight 80 mm L 2700 + weight 500 mm , Total L 3200 mm

Condition: good (used), Item: D-1036-Bulk feeder. ABK Sweden Type: STR 301 Stainless Steel bulk feeder with close vat at bottom. Discharge height: 2700 mm Dimension: L 3500 x H 2700 x W 1500 mm Vat: W 1500 x L 1450 x H 1350 Vat inside: W 900 x L1050 x H700 Flight height: 100 mm Belt width: 300 mm Ibelsn Nxprehccqnja

Condition: repair required (used), Year of construction: 2013, functionality: not functional, machine/vehicle number: AW016804, A-WARD UO20 CONTAINER TILTING SYSTEM, designed for the safe and efficient handling of 20-foot ISO containers in bulk material handling operations. The equipment allows for hydraulic tilting of the containers from 0° to 90°, facilitating the quick loading or unloading of bulk products such as scrap metal, minerals, grains, or other loose materials. • Type: container tilter with universal frame • Application: loading/unloading of 20-foot ISO containers • Tilting range: hydraulic tilting from 0° to 90° • Operation: self-contained hydraulic system with remote control • Status: available for sale • Condition: available for inspection The system improves safety, productivity, and loading efficiency by enabling controlled gravity-fed handling of bulk materials directly within the containers. Remarks: The unit is sold in its current condition. It is missing hydraulic hoses, and the weighing system is not operational. Islozbtu Ashccqnjba

Condition: good (used), Stainless steel pipe threaded screw conveyor screw auger Diameter 270mm Length 2400mm Motor power 2.2kW Entirely stainless steel Iolhcewyf N Dscqnoba See our other advertisements.

Condition: used, Dosing screw, screw conveyor, auxiliary feed screw Material: stainless steel Motor power: 1.5kW 85rpm Inlet dimensions: 770x410mm Screw flight diameter: 220mm VMA Wekerom Iolhccowyf Imoqnsba See our other listings

Condition: good (used), Stainless steel screw conveyor feeder screw feeder screw filling screw big bags Diameter screw conveyor 170mm Length screw conveyor 1900mm Outlet 170mm See our other advertisements Ibjlhccewyf Efoqnea VMA Wekerom

Condition: good (used), Stainless steel screw conveyor, screw feeder, dosing screw Ibjlhcswyfz Tocqnoa Made entirely of stainless steel Screw length: 620 mm Screw diameter: 150 mm Motor power: 0.15 kW, 9 rpm 2 units in stock See our other listings VMA Wekerom

Condition: used, Conveyor screws, auger, screw conveyor Heavy-duty design, suitable for large capacities. Dimensions: 1x Conveyor screw, diameter 470mm, L: 4000mm Ibjlhccqsyhblponsa 1x Conveyor screw, diameter 320mm, L: 3800mm (excluding electric motor) 1x Conveyor screw, diameter 420mm, L: 3550mm 1x Conveyor screw, diameter 420mm, L: 4050mm Equipped with heavy-duty external bearings with shaft seals. Available for sale individually or as a lot. For more information, please contact us. See our other listings. VMA Wekerom

Condition: good (used), Trough conveyor belt Length: 32 meters Belt width: 65 cm Can be disassembled into 3 parts 7.5 kW drive motor Ibelhccszcyazeqnea Good condition

Condition: refurbished (used), Scraper for chips/wood chips Ibelhccqsy R Ugyonja Carrier width: 640 mm Straight section: 4 m Inclined section: 4 m Completely overhauled

Condition: new, Year of construction: 2026, operating hours: 12 h, functionality: limited functionality, Ezystack Stockpiling Conveyor R6536 TR with tracked chassis, slewing via wheel drive. Equipment: Wired and radio remote control Ielheyk S T Njccqneba Weight: approx. 9,000 kg Transport dimensions: 12,036 x 2,350 x 2,519 mm (L x W x H) Drive motor / power: CAT 1.7 / 36 kW Discharge height: 7,952 mm Belt width: 900 mm Belt length: 18,530 mm

Condition: new, Year of construction: 2024, Conveyor belt: hydraulically foldable in and out Scrapers: front and rear scrapers Conveyor belt length: 25,000 mm Engine: Caterpillar 4.4 fixed-speed engine, 133 hp Track chassis: ground plates 400 mm Discharge height 22.5° / 27.5°: 8,820 / 11,000 mm Conveyor belt width: 1,200 mm Feed hopper: capacity 8 m³ Ibelhsikqxtsccqnsa

Condition: new, Year of construction: 2025, operating hours: 8 h, functionality: fully functional, conveyor belt width: 900 mm, conveyor belt length: 18,320 mm, discharge height: 8,320 mm, motor manufacturer: Caterpillar, Belt length / width: 18,320 / 900 mm Ibjlhcew Hccnscqnoa Cat C1.7 engine: output 36 kW at 2,800 rpm Conveying capacity: approx. 400 t/h Discharge height: 8,320 mm at 22.5° incline Belt: hydraulically retractable and extendable Height adjustment: hydraulic Remote control: wired remote Crawler undercarriage length: 1,800 mm with 400 mm track plate

Condition: good (used), Year of construction: 2023, operating hours: 1,031 h, functionality: fully functional, overall weight: 18,999 kg, Belt width: 1,200 mm Belt length: 30,500 mm Dimensions in working position: 28,219 x 2,489 x 12,268 mm (L x W x H) Discharge height at 22° inclination: 12,268 mm Engine manufacturer: Cat C2.8 Operating weight: 18,999 kg Transport dimensions: 16,078 x 2,489 x 3,149 mm (L x W x H) Engine power: 55 kW Iolheyw Hlueccqnoba Throughput: approx. 700 t/h

Condition: used, Year of construction: 2006, functionality: fully functional, 2 pieces rotary valve dosing feeders ! Price per unit ! Manufacturer: Torex Model: RV20 Connection size inlet/outlet: 300 x 300 mm Overall height: 455 mm Sealing strips made of rubber Bolted plastic lining of the individual compartments for improved discharge. Functionality has been checked! Bearings can be relubricated from the outside. Last used for dosing hydrated lime. Drive power: 1.5 kW Ielhjxd Dukeccqnoba Speed: 30.9 rpm