Powder coating plant

Handelsagentur Klaus Benecke Bauteile bis 4 Meter, Hybridofen möglich

Condition: new, Year of construction: 2026, Driving extra long poles, solar system poles and large diameter poles With the new SolarPro post driver from Rhino, EuroGate International is launching a completely new way of driving posts on the market. This professional attachment, suitable for the most common earth-moving machines, drives a pile with a maximum length of 450 cm into the ground with about 1000 strokes per minute. With a force of up to 1,085 joules, posts up to a maximum diameter of 38 cm are no problem for this powerhouse. Piles are driven vertically into the ground at great speed. These machines are very suitable for solar installations, fencing and road construction. The possibilities are endless. A tough project, even in difficult terrain? No problem for the Rhino SolarPro. Designed to accelerate the installation of solar farms. The Rhino SolarPro is ‘X and Y axis adjustable’ to ensure accurate, fast and perpendicular driven piles for solar parks and fencing, among other things, regardless of the soil conditions of the construction site or the terrain. This professional construction attachment for construction equipment is designed and built in the USA with the highest quality materials. The SolarPro has a CE certificate and is built according to the standards for the European market. Features and benefits Suitable for posts up to 38 cm in diameter with a maximum length of 450 cm. The hammer and guide hold the post in place for efficient hammering of the post. Uses the existing hydraulic drive of the earth-moving machine and the use of the attachment function eliminates the need for an expensive self-propelled pile driver. This allows you to complete your project on time and within budget. The Rhino SolarPro is equipped with a universal mounting plate for the most common excavators and earth-moving machines. Guodpfx Aasia N Eqj Sja Equipped with modern, Furukawa FX hydraulic hammer Designed for efficient pile driving, reliable hammer with a long service life. Powerful 800 ft. lbs. (1,085 Joules) impact energy per stroke (approximately 1,000 strokes/min.) Features a new and improved piston (larger diameter and longer stroke) increases speed – provides more impact energy.Using the monobloc design, this machine requires less maintenance with only two moving parts. Pole pull function included The SolarPro pile driver offers an integrated pile driver with vibration aid for the toughest applications. By using this function you can remove a knocked-out post in no time at all.

Condition: good (used), Plant: REWA Chamber Filter Press used Type: 470-15-25K-HP Design: side rail guided Gjdpfx Aoqakbrja Sjua Filter plate format: 470x470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available in coordination with the medium Press capacity: approx. 57 dm3 Filter pressure: approx. 15 bar Material of parts in contact with the product: Flange, feed-throughs stainless steel, PP or rubberized Material of parts not in contact with the product: Stainless steel Purchase or hire: Inspections of the systems by arrangement at our factory. Other: We can supply you with used equipment ready for operation or refurbished according to your wishes and requirements. Would you like to rent or buy this system? Please contact us, we are at your disposal.

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single side decoiler ARKU AH 3000/ST-M Gusdpehigmbsfx Aa Ssa year of manufacture 1995 belt width max. 600 mm load capacity max. 3.000 kg coil outer diameter max. 1.800 mm Spreading hydraulic Pressing arm hydraulic Decoiler with auxiliary drive and brake coiler chair fixed + reel traversing device with: Lg 33221 High performance belt leveler LORENZ BRM 50/620.9 year of manufacture 2007 Machine no. 001669 passage width max. 620 mm number of straightening rolls 9 Straightening roll diameter 50 mm Material density 0.7 to 6.0 mm Straightening rolls supported several times against deflection All rolls driven by transfer gearboxes and cardan shafts. cardan shafts. Used, in as-is condition from stock, available immediately. On request with overhaul. Delivery time by agreement. Further data shortly or on request.

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 135 h, load capacity: 230 kg, empty load weight: 7,600 kg, construction height: 2,530 mm, fuel type: diesel, total length: 7,770 mm, drive type: Diesel, arm reach: 10,600 mm, construction width: 2,300 mm, working height: 17,650 mm, Articulated boom lift Transmission: Hydrostatic Condition: As new Technical condition: Very good Front tyres type: Solid rubber Front tyres size: 18 Front tyres condition: 80 - 100% Rear tyres type: Solid rubber Gujdpfoupauqsx Aa Sea Rear tyres size: 18 Rear tyres condition: 80 - 100% Description: The 180 ATJ articulated boom lift offers a lifting capacity of 230 kg with a working height of 18.19 m. It meets all requirements for outdoor work on uneven, sloped, and obstructed surfaces. Its off-road capability makes it the ideal working partner on construction sites with rough terrain. Thanks to the new progressive hydraulic speed control, both noise levels and fuel consumption are reduced. Like other engine-powered work platforms, its 4-wheel drive and 3 steering modes make maneuvering and positioning the machine easy on congested or tight sites. The design of the control panel ensures a clear operating environment for quick handling and immediate productivity. 230 V generator and sockets in the platform basket, SMS Safe Man System

Year of construction: 2001, condition: refurbished (used), low price laser cutting machine NTX48 1,5kW refurbished, MAZAK lasercutting machine with 1500W table size: 2500mm x 1250mm machine dimension 2,6m x 6m parts conveyor full covered machine table Guedpfxjhturce Aa Sea FE: 12mm VA: 6mm plastics possible to cut incl. software incl. exhauster to test under power ! option: warranty, setup, training

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 year of manufacture: 2021 Technical data load capacity approx. max. 2.000 kg strip width max. 400 mm Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Gusdeg U Utvspfx Aa Sea Spreading of the support segments manually by means of hand crank via joints Number of supporting segments 3 Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Additional equipment: Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Tape side guide at the bottom housing of the loop control, by means of lateral guide rods. The passage width is continuously adjustable.

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Gjdpfx Aepugwioa Sjua The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Year of construction: 2005, condition: like new (used), Quality used Bystronic Pr 100 8axis cnc pressbrake for sale BYSTRONIC PR100 x 3100 100 ton x 3100mm 8 Axis CNC Hydraulic Down stroke Press Brake complete With Cybelec Modeva 10S Control. Manufactured 2005 – fully serviced with Bystronic uk from new Gedpfxehufkte Aa Sjua Specification Year of Manufacture /new 2005 Control Cybelec Modeva 10S Back gauge Programmable Guards Fiessler AKAS Capacity 100 Ton Maximum length of bend 3100mm / 3metre Extended Daylight – to be confirmed Max stroke 315mm Rapid approach 180mm/s Bending cycle 10mm/s Rapid return 150mm/s Tooling top and bottom Wander type footswitch Total 8 axis Y1,Y2,X1,X2,R1,R2,Z1,Z2 – 6axis back gauge Hydraulic Crowning We can quote for delivery and installation complete with operator training We can advise and supply brand new tooling to produce your sheet metal products on this cnc press brake

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Gedpfx Aed Ixadea Ssua Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Weight (kg) 5000

Condition: good (used), Year of construction: 2005, URBAN Welding and Cleaning Line type CC 16/43-26/23 consisting of Welding Machine AKS 1600 and Polishing Machine SV 430. Guedpfxjvyqbmo Aa Sea