Used cold saws - half-automatic - saw blade diameter 0-350mm for sale (39)

Condition: used, diameter of saw band: 350cutting area - round: 350cutting area rectangle: 350 x 350total power requirements: 2,2 Used cold circular saw Kaltenbach SKL 350 Cutting Capacity at 90°: Round: Up to 135 mm Square: Up to 120 mm Flat: Up to 70 x 280 mm Cutting Capacity at 45°: Square: Up to 105 mm Flat: Up to 55 x 210 mm Iedsv Ncpbjpfx Ab Ija Saw Blade Speeds: 2,250 and 4,500 rpm Motor Power: 5/6 hp (approx. 3.7/4.5 kW) Weight: Approx. 650 kg Dimensions (L x W x H): Approx. 1,200 x 1,200 x 1,500 mm

Condition: excellent (used), Year of construction: 1966, I sell a circular saw made in Germany. Company Eisele model vms II in good condition Iedpsvbwfnofx Ab Iea

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Cold Circular Saw Eisele VMS-II-S, Year 1987, Very Good Condition from University >> Manufacturer: EISELE, Model VMS II S >> Vertical cold circular saw >> 2 speeds: 17/34 rpm >> Year of manufacture: 1987 >> Working range: Ø 80-102 mm / Flat 160x75/82 mm >> Drive power: 1.4/1.9 kW Iedpfx Ajxx T Nmsb Ija >> Saw blade diameter possible: 275 - 315 mm >> Space requirements approx. 80 x 90 x 180 cm >> Weight approx. 400 kg >> Manual lowering of the saw carriage with adjustable hand lever >> Manual, laterally adjustable material vice >> Coolant system with electric coolant pump integrated in machine base About the machine: A well-maintained Eisele VMS-II cold circular saw is being offered. The machine is in original condition and fully functional. It comes from a university and has seen little use. You are welcome to test and inspect the saw under power at our facility.

Condition: good (used), Year of construction: 2002, Metal Circular Saw Behringer Eisele VMS 300 PV Manufacturer: Behringer Eisele Type: VMS 300 PV Year of construction: 2002 Condition: used Cutting range: Straight cut: 120 x 75mm 45° miter cut: 80 x 75mm Speed: 40/80 rpm Weight. 200kg - semi-automatic version - pneumatic quick clamping devices - Infinitely adjustable hydropneumatic saw blade feed - stroke adjustment of the saw unit via clamping lever - generously dimensioned gears with EISELE rotation compensation - Convenient saw blade change Iedpfx Aexwl Ureb Ija Scope of delivery - Operating instructions - 1x saw blade (mounted)

Condition: used, Technical details: Saw blade diameter: 350 mm cutting range 90 degrees: round: 110 mm cutting range 90 degrees: square: 85 x 85 mm cutting range 90 degrees: flat: 180 x 85 mm cutting range 45 degrees: round: links/rechts: 105 / 110 mm cutting range 45 degrees: square: links/rechts: 85 x 85 / 85x85 mm cutting range 45 degrees: flat: links/rechts: 130x85 / 130x85 mm hole of sawblade: 40 mm range of revolutions per minute - continous: 9 / 18 / 36 / 74 / 4step U/min rotary table: Ø 400 mm/min table swivelabel +/-: 60° rechts und 45° links ° air-pressure connection: 7 bar Isdpfx Aeu Nilyeb Isa total power requirement: ca. 2,2 kW weight of the machine approx.: 430 kg dimensions of machine: B: 0,7 x T: 1,01 x H: 2,1 m The circular saw is an electro-hydro-pneumatic semi-automatic circular saw with which miter cuts of up to 45° inwards or 60° to the right can be made on profiles and solid materials. Vertival circular saw Solid, heavy cast construction max. opening of the vice 180mm cutting counter vertical travel of the saw head: 200mm Vice opening width max. 180mm (jaw size W:220 x H:70mm) Operation via control panel *

Condition: used, Year of construction: 1999, cutting diameter max 400 mm mit Sägeblättern Isdjw Sygmjpfx Ab Ioa weight of the machine ca. 1,4 t

Condition: excellent (used), Year of construction: 2007, BIMAX TA 91 Automatic Circular Saw TECHNICAL DATA Total power requirement, rotary current: 3 x 400 V For pneumatic machines: 3 kW For hydraulic machines: 3 kW Customer-provided mains fuse: 16 A Isdpfx Aov I Dmlob Ija Supply line: 4 x 2.5 mm, 3P + E Air connection: Diameter: 12 mm Supply line: 8 – 10 bar, 40 l/min Operating pressure: 6 bar Spindle drive via three-phase motor: B5-100S 4/2-pole, Dahlander circuit: 1420 / 2840 rpm Power: 1.8 / 2.5 kW Saw blade mount: 32 mm Drive pin: 8 mm Pitch circle of drive pin: 45 mm Cutting wheel mount: 22 mm Saw blades: 160 x 1 to 300 x 2 mm Passage range: Round up to 65 mm Square up to 55 x 55 mm Rectangular up to 80 x 50 mm Standard clamping jaw for diameters: 10 – 60 mm Material feed length: 0 – 250 mm Saw weight: 500 kg Hydraulics: 120 kg No liability is assumed for the accuracy, completeness, or timeliness of this information.

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 0783, Miter cold circular saw EISELE Type VMS-III-S-PV Type No. 430 Machine. No. 0783 Year of construction 1986 Sawing range at 90°: (round) Ø 120 mm Sawing range at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cut 45° to the left, 90° and up to 30°(60°) to the right infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Pneumatic material quick clamping device - Infinitely adjustable pneumatic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Comfortable and stepless stroke adjustment of the saw unit via clamping lever Iedpfx Abet A Ar So Iea - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 460 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4200 € 315 mm 315x32x63 mm 45 / 90 U/Min 45 ° 45 ° rund 105 mm / quadratisch rund 90 mm / quadratisch rund 90 mm / quadratisch 1,3 / 1,8 kW 600 mm 1000 mm 1400 mm 200 kg Manual vice Robust double joint pivot Low-voltage start/stop switch in the handle Ijdpjwmzfzofx Ab Iea 45-degree left and 45-degree right mitre cuts Split vice (clamps before and after the sawblade) Sawblade not included

Condition: ready for operation (used), machine/vehicle number: 532-96103, Half automatic band saw with a cutting range upto 280 mm diameter. Iedpfjiwlmcjx Ab Ija Saw length 4318 mm

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, SEMI-AUTOMATIC CIRCULAR SAW MEP TIGER 352 SX EVO - Blade rotation at 4 speeds (15/30/45/90 rpm) - Rotating table mounted on central spindle and axial bearing - Cutting head feed on double linear guideway - Mechanical stops at -45°, 0°, +45°, and +60° with locking device at any angle Iedpjxdr Rtsfx Ab Iea - User interface with display

Condition: like new (used), Year of construction: 2021, Cold circular saw with 40 hours Ijdpfx Aovxr H Iob Iea as new

Condition: used, cutting diameter 320 mm saw band length 4570 x 27 x 0,9 mm table height mm cutting width 450 x 280 mm power capacity 4,0 kW Iedpjvn U D Usfx Ab Ija cutting speed 15 - 105 m/min engine 380 V total power requirement 4,0 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,8 x 0,8 x 1,2 m Band saw with - coolant device - mitre device

Condition: used, Year of construction: 1985, dimensions of saw-blade Ø 320-350 x 3.0 mm cutting range 120 mm capacity 90 degrees: square 90 x 90 mm capacity 90 degrees: flat 200 x 90 mm Isdpfx Ajxacbnjb Isa capacity 45 degrees: flat 140 x 90 mm work height max. 925 mm saw blade turning speeds 17 / 34 U/min compressed air 6.0 - 8.0 bar engine output 1400 / 2800 U/min. total power requirement 2.0 / 2.6 kW weight 470 kg range L-W-H 850 x 900 x 1800 mm Machine from a vocational school (NL) maintained condition (!!) Furnishing : - semi-automatic vertical cold circular saw - pneumatic material quick-clamping device - Infinitely adjustable saw blade feed - Convenient miter adjustment with fixed stops - Convenient stroke adjustment of the saw unit using a clamping lever - Generously sized gearboxes - with Eisele rotation compensation for long saw blade service life - Convenient saw blade change - High productivity with minimal space requirements (less than 1 m²) - Coolant device * Machine link: ?machineno=1008-9164094

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4500 € Iodpfxswmzfus Ab Iea 315 mm 315x32x63 mm 45 / 90 U/Min rund 105 mm / quadratisch rund 90 mm / quadratisch 1,3 / 1,8 kW 600 mm 1000 mm 1400 mm 200 kg Pneumatic vice Low-voltage start/stop switch in the handle 45-degree left and 45-degree right mitre cuts Split visc (clamps before and after the sawblade) Self-centering visc for optimal cutting position Large base frame for high stability Sawblade not included

Year of construction: 1969, condition: good (used), machine/vehicle number: 1130, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm cutting area at 90° square: 100 x 60 mm cutting speed: 17/34 m/min engine: 380 V, 1,8/2,6 kW space needed: 1200 x 860 x 1850 mm Iedpfx Aod Rxw Sob Ija weight: 720 kg

Condition: used, saw blade diameter 350 mm cutting diameter 90 mm stroke 160 mm mitter cutting - all-position ± 45 ° voltage 380 V weight of the machine ca. 350 kg dimensions of the machine ca. 0,80 x 0,85 x 1,35 m - S/N: 4296 - pneumatic feed - coolant equipment Ijdpsd Il Azjfx Ab Iea

Condition: used, Year of construction: 1975, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 45 degrees: round 100 mm capacity 90 degrees: flat 150 x 110 mm capacity 45 degrees: flat 120 x 100 mm engine output 1,8 / 2,6 kW 500 mm weight 450 kg dimensions ca. 1100x710x1850 m Semi-automatic vertical cold circular saw with pneumatic clamping and feed device Iodow Nrvbspfx Ab Ija 4 saw blade speeds (2 via motor / 2via gearbox: 11/22/44/88 rpm integrated coolant pump

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,42 t Iedpofgyh Tefx Ab Ija Double miter metal band saw, GBS 250 Super AutoCut - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Quick release vice - Massive, large material support - Automatic cooling

Condition: used, Year of construction: 1998, dimensions of saw-blade 350 x Ø 40 x 3 mm cutting range 120 mm capacity 90 degrees: square 100 x 100 mm capacity 90 degrees: flat 170 x 100 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 95 x 95 mm capacity 45 degrees: flat 120 x 100 mm capacity 60 degrees: round RE 100 mm capacity 60 degrees: square RE 85 x 85 mm capacity 60 degrees: flat RE 85 x 100 mm work height max. 900 mm saw blade turning speeds 17 / 34 U/min compressed air 6.0 - 8.0 bar total power requirement 1.4 / 1.9 kW weight 340 kg range L-W-H 1010 x 765 x 2175 mm Furnishing : - semi-automatic vertical cold circular saw - pneumatic quick clamping device - Infinitely adjustable saw blade feed - Comfortable miter adjustment - Convenient stroke adjustment of the saw unit via clamping levers - Generously sized gearboxes - with Eisele rotation compensation for a long saw blade service life - Convenient saw blade change - High productivity with the smallest footprint (less than 1 m²) - Machine base - Operation manual (PDF) Machine with factory new spare parts (installed): Ijdpoxabk Ujfx Ab Isa 1x cylinder Pneu/HydrDoppelw.D80HUB190 for saw blade lowering 1x gas spring Hub100 D23 F=800N for safety hood

Condition: new, Year of construction: 2025, neu 2025 060103 prompt, Zwischenverkauf v Türkei 7500 € 121.59 € 1 6300 € 350 mm 350x32x63 mm 45 / 80 U/Min Iedpfx Abowmf Uas Isa 45 ° 45 ° rund 115 mm / quadratisch rund 110 mm / quadratisch rund 110 mm / quadratisch 1,8 / 2,2 kW 1100 mm 1000 mm 1400 mm 300 kg Semi-automatic circular saw designed High production rates, ideal for small and mid production Heavy duty gearbox Cast iron structure Foot switch actuation Hydro-pneumatic operation of saw head smoothes descent for optimum cut Pneumatic vice 2 cutting speeds Adjustable head stroke according to the dimensions of the material which has to be cut Piece counter 45° right to 45° left cutting saw blade not included OPTION: saw blade Dm. 350 mm € 180,00

Condition: good (used), Year of construction: 1980, machine/vehicle number: 2038, Offer 24272 Technical data: Iedpst H Ibmofx Ab Ioa - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting range - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 800 x D 600 mm - Weight approx. 80 kg - Table base W 900 x H 750 x D 500 mm

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW Ijdpfsfg E Hlex Ab Ija weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, saw blade diameter 350 x 32 mm capacity degrees: round 1 mm capacity degrees: round 110 mm capacity 60 degrees: round .0 mm capacity degrees: square 95 x 95 mm capacity degrees: square 95 x 95 mm capacity 60 degrees: square x mm capacity degrees: flat 180 x 95 mm capacity degrees: flat 125 x 95 mm Iedpfx Abexabd Is Iea capacity 60 degrees: flat x mm

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! Ijdpjd Iipmsfx Ab Iea 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens