Broaching tool 20 mm

Hasseay Savage 11620 J9 HSS M-2

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Blodpfx Aeq Nqkxodder Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Year of construction: 2024, condition: new, Bending capacity: 6 mm Bending: 5 mm Bending capacity: 6 mm Bending: 5 mm Bending length: 2,030 mm roller diameter: 170 mm Engine power: 4 kW Length: 3.600 mm Blsdpfx Ajftdh Ijdder Width: 1,020 mm Height: 1.120 mm Weight: 2.400 kg The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

Condition: used, Year of construction: 2022, sheet width:1550 mm plate thickness:4 mm pre-bending:6 total power requirement:2,2 kVA weight of the machine ca.:1,42 t Bjdpfx Adst Hmlqsdjlr dimensions of the machine ca.:2,7 x 0,75 x 1 m roll feed:3,5 m/min Motorised blade roller 3 rolls Material width 1550 mm Material thickness max. 4 mm Shaft diameter 140 mm Roll feed 3,5 m/min

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 554 mm turning dia. over face-slide: 370 mm turning length: 1000 mm centre distance: 1100 mm Bjdpfxev Azdws Addelr control: Fanuc 210i longitudinal traverse (z-axis): 1000 mm Transversal stroke (x-axis): 290 mm revolution per minute: 16 - 1800 U/min spindle stroke: 178 mm feed:: 10 m/min. spindle passage: 104 mm spindle nose: D1 - 11 tailstock taper ISO: 6 MT spindle drive: 11/7,5 kW connection voltage: 380 V electrics - voltage/frequency: 3 Ph / 400 V / 50 Hz V/Hz total power requirement: 11 kW Weight approx.: 4,0 t dimension machine xH: 3,3 x 1,8 x 1,7 m

Condition: excellent (used), Year of construction: 2013, operating hours: 29,083 h, functionality: fully functional, machine/vehicle number: MV 0061-000242, feed length X-axis: 762 mm, feed length Y-axis: 516 mm, feed length Z-axis: 570 mm, travel distance X-axis: 762 mm, travel distance Y-axis: 516 mm, travel distance Z-axis: 570 mm, spindle speed (max.): 10,000 rpm, table width: 570 mm, table length: 860 mm, position of the milling head: Vertical, warranty duration: 3 months, power: 1.42 kW (1.93 HP), Equipment: documentation/manual, rotational speed infinitely variable, Doosan VC510 Twin Pallet Vertical Machining Centre with Doosan Fanuc i Series CNC Control, Table Size 2 x 860 x 570mm, Max Workpiece Height 520mm, Spindle Speed 10,000rpm, BT40 Spindle Taper, 40 Tool ATC, X Axis Travel 762mm, Y Axis Travel 516mm, Z Axis Travel 570mm, Pumps and Equipment WPB 10-1000 Hydrajet High Pressure Coolant System, Kaukan Chiller Unit, LNS Turbo HB Swarf Conveyor. S/No. MV 0061-000242 (2013) Machine Weight 9500kg, Various BT40 Back End Spindle Tools Blodpfx Asv Du Avoddsr Machine comes with various BT40 Tool holders

Year of construction: 2021, condition: like new (used), AVEREX HS-540i GTS Horizontal machining center with 8 pallets Bjdoh Iy Snspfx Addolr Control system - Fanuc M-Pro1 (0i-MF) - 10,4" color LCD - NC memory with 512 KB - AICC II Control with 200 blocks readable in advance - Ethernet and USB Device - Electronic handwheel - Weekly timer: Auto. Power On/Off of the machine - High Speed Skip - Manual Guide 0i - 54 (6+48) pairs of workpiece zero points - Tool Offset Memory C - 400 pairs of tool offsets - 400 storable programs - High Speed Skip Signal - Programmable spindle load monitoring - Tool Life Management - Advanced macro variables (#500-#999) - Program Restart - Helical Interpolation, Cylinder Jacket Interpolation - Drilling cycles, rigid tapping - Scaling, Mirroring, - Polar Coordinates Programming - Corner chamfering / Corner rounding - Blanking sets, up to 9 different - Customer macro "B Travels - travels X/Y/Z: 800/800/800 mm - spindle center to pallet surface: 30 - 830 mm - spindle nose to pallet center: 100 - 900 mm - travels B: 0-360 ° Speeds - rapid traverse X/Y/Z: 74/74/74 m/min - feed rate during milling: 0 - 40.000 mm/min - rapid traverse B: 66.6 rpm - 1G+ acceleration Pallet changer - rotary changer - number of pallets: 2 - pallet size 500 x 500 mm - Load capacity: 500 kg per pallet - workpiece size: Ø800 x H1.000 mm - Mechanical locking of the pallet clamping device - Pallet clamping force: 9.8 kN x 4 cones (39.2 kN) - Pallet height from floor: 1,099 mm Tool changer - Tool holder: BBT 40 (SK 40 and HSK 63 optional) - Number of magazine positions: 80 - Max. Tool diameter: Ø95 mm - Max. tool diameter Max. tool diameter with free neighboring places: Ø185 mm - Max. length: 400 mm - Max. Tool weight: 8 kg - Type: fixed station/chaotic table - Speed: 16 sec. for 80 tools - Tool change time: 0,9 sec./2,1 sec. (heavy tool) - Chip to chip time: 3.0 sec./3.5 sec. (heavy tool) Spindle - Spindle Taper: BBT 40 Big Plus™ - Speed: 15,000 rpm - Drive power: 37 kW - Torque: 249 Nm up to 1,150 rpm - Compressed air through and at the spindle - Bearing diameter: Ø71 mm - lubrication: oil / air - oil cooler Rotary axis - Axis: Full 4th axis - 66.6 rpm - Indexing: 0.001 - Clamping force: 5.000 Nm - Holding force: 1.973 Nm Linear guides - Manufacturer: THK - width: 45 mm - guide shoes X/Y/Z: 190 x 120 / 120 x 70 / 154 x 86 mm Ball screw - Manufacturer: TSUBAKI - Diameter: 40 mm - Internal cooling: Yes, temperature controlled - Feed forces X/Y/Z: 13.500 Nm - Lubrication: Oil / Air Coolant management - Coolant system incl. tank 550 liters and pumps - Chip spirals on the right and left side of the machine - Coolant through the spindle, 30 bar, incl. preparation for 70 bar - Coolant shower - oil skimmer Accuracies - positioning accuracy: ± 0,005mm - Repeating accuracy: ± 0,0025 mm Other - Adjustable thermal compensation of spindle and motor flanges - Central lubrication oil / air - CE - 50 kvA transformer Dimensions (APC 2 / 80 or 120 tools) - Machine size: 4.914 x 2.660 x 2.632 mm - Footprint: 4.914 x 3.880 x 2.632 mm - Machine weight: approx. 12,960 kg - Dual chip conveyor (combination hinged and scraper belt) - Magazine capacity increased from 80 (standard) to 120 ex works - BLUM TC50 probe with infrared transmission System for

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, overall weight: 33 kg, load capacity: 10 kg, arm reach: 1,350 mm, At Automex, we don’t just supply robots – we use them daily in our own production. This hands-on experience enables us to confidently recommend only solutions that truly work. Universal Robots UR10 – Collaborative Robot (Cobot) ----- €28500 net ----- Condition: Brand new Year of manufacture: 2025 Warranty: Full start-up warranty – all functions tested and certified Origin: Original production by Universal Robots, Denmark Delivery: Price includes shipping to any location within Europe The UR10 is one of the most popular and versatile collaborative robots on the market. With its high payload capacity and long reach, it is ideally suited for a wide range of industrial applications – from machine tending and packaging to assembly and pick-and-place. Its intuitive programming environment makes it an excellent choice both for mass production and flexible, small-batch operations. Technical specifications (UR10): Payload: 10 kg Reach: 1,300 mm Degrees of freedom: 6 rotary joints Repeatability: ±0.05 mm Robot weight: 33.5 kg Blsdpfxoxf Ibqe Addjr Power consumption: approx. 350 W Mounting options: floor, ceiling, or wall Programming: intuitive URCaps environment + integration with external systems (ROS, Modbus, Ethernet/IP, PROFINET) Safety functions: compliant with ISO 10218-1 and ISO/TS 15066 The Universal Robots UR10 has been designed for safe human-robot collaboration. Its flexibility, precision, and ease of deployment make it the perfect solution for companies looking to automate quickly and effectively, without compromising safety or versatility. We offer a full range of Universal Robots cobots as well as used units from brands such as AUBO, YASKAWA, and ABB. Please feel free to inquire! The cobots shown are used in Automex production and may be a different model than the one proposed in the advertisement.

Condition: as good as new (ex-display), MIR 4-wheel robot with Gibas body with loader Bodpfxjtykize Addelr Video just as an example of the possibilities

Condition: good (used), Square broaching tool, multi-wedge broach, broaching tool, broaching needle, grooving tool, keyway broaching tool, keyway broaching needle Blsdpfxewt N H Tj Addor -Manufacturer: HS Hasseay Savage, broach push broach -Type: 11622 J9 HSS M-2 -Keyway width: 22 mm -Quantity: 1 piece available -Dimensions box: 495/50/H50 mm -Weight: 2.8 kg

Condition: good (used), Square broaching tool, multi-wedge broach, broaching tool, broaching needle, grooving tool, keyway broaching tool, keyway broaching needle -Manufacturer: HS Hasseay Savage, broach push broach -Type: 11518 18MM V -Keyway width: 18 mm -Quantity: 1 piece available -Dimensions box: 395/40/H40 mm Bsdpfjwt N Hyjx Addelr -Weight: 1.3 kg