Revolver lathe

HCP Cegielski RV32

Condition: used, Year of construction: 1997, CNC lathe Dainichi F200 Japan year 1997 Fanuc 18iT turning diameter: 360 mm turning length: 600 mm spindle bore: 52 mm chuck: 200 mm turret for 12 tools tailstock probe Codoymcvgjpfx Andehd chip conveyor

Condition: good (used), Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe -Manufacturer: WMW, automatic lathe type DRT 50m -Turning length: 550 mm Chodpsha Hvvefx Andod -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm -Three jaw chuck: Ø 200 mm -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW -Dimensions: 2420/1040 / H1460 mm -Weight: 2200 kg

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 32,000 m/min, controller manufacturer: FANUC, controller model: Series 0i-MC, spindle speed (max.): 12,000 rpm, spindle motor power: 18 W, BRAND: DOOSAN-DAEWOO MODEL: MYNX NM-510 Csdpfexxlmwox Andshd CATEGORY: VERTICAL MACHINING CENTERS YEAR OF MANUFACTURE: 2006 CNC CONTROL: FANUC Series 0i-MC MACHINE WEIGHT: 7,500 kg MACHINE DIMENSIONS: - Length: 4,165 mm - Width: 2,600 mm - Height: 3,043 mm Spindle Spindle taper: ISO 40 Spindle speed: 12,000 rpm Spindle motor power (cont./30 min): 15 / 18.5 kW Working Capacity X axis: 1,020 mm Y axis: 510 mm Z axis: 625 mm Distance spindle nose – table surface: 150 – 775 mm Distance spindle center – column: 557 mm Table Table dimensions: 1,200 x 500 mm Table load capacity: 800 kg Feed Rates Rapid traverse (X/Y/Z axes): 36,000 / 36,000 / 32,000 mm/min Cutting feed rate (X/Y/Z axes, linear interpolation, max): 8,000 mm/min Tool Changer Tool holder taper: DIN 69871-A40 Shank: DIN 69872-A40 Tool magazine capacity: 30 stations Maximum tool diameter (adjacent tools full/empty): Ø 90 / Ø 150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Accessories Coolant tray + high pressure pump (15 bar) with through-spindle coolant Chip conveyor Spindle line air conditioner + transformer Manuals, electrical diagrams, and CE Declaration

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 490 mm, travel distance Z-axis: 780 mm, DOOSAN PUMA V550M – CNC Vertical Turning Lathe Manufacturer: DOOSAN Model: PUMA V550M Year: 2013 CNC Control: FANUC i-Series Machine Type: CNC Vertical Turning Lathe with C-Axis and Live Tools Machine Weight: 9,000 kg Machine Dimensions: 1,905 x 3,365 x 3,350 mm Maximum Swing Diameter: 800 mm Maximum Swing Over Carriage: 490 mm Maximum Turning Diameter: 730 mm Maximum Turning Height: 750 mm Maximum Load Capacity on Chuck: 650 kg Chuck Diameter: 390 mm Spindle Nose: ASA A2-11 Spindle Speed: 20 – 2,000 rpm Spindle Motor Power: 30 / 37 kW Automatic Spindle Speed Ranges: 2 Csdez Albcjpfx Andjhd C-Axis: ±360° with 0.001° angular positioning and hydraulic clamping X-Axis Travel: 490 mm Z-Axis Travel: 780 mm X-Axis Rapid Traverse: 12,000 mm/min Z-Axis Rapid Traverse: 16,000 mm/min C-Axis Rapid Speed: 200 rpm Turret: BMT-75 Turret Stations: 12 positions, suitable for live tools Live Tool Speed: 30 – 3,000 rpm Live Tool Motor Power: 3.7 / 5.5 kW Tool Size: 32 x 32 mm / Ø50 mm Live Tool Holders: 4 included, 2 radial and 2 axial Additional Tooling: Various fixed tool holders Automation Preparation: Automatic side door for loading automation Coolant System: Coolant tank with high-pressure pump Chip Removal: Rear chip conveyor Documentation: Manuals, electrical diagrams and EC/CE Declaration

Condition: not inspected (used), Year of construction: 1994, operating hours: 8,000 h, functionality: unexamined, Machine in good condition Cedpfxov Im Sds Andjhd

Condition: used, Year of construction: 1993, Technical details: Codpfx Aju Idn Hondjhd x-travel: 400 mm y-travel: 300 mm z-travel: 400 mm spindle revolutions per minute : 8000 U/min control: Fanuc OM clamping table: 500x300 mm magazine slots: 16 Stück tool taper: SK40 distance work spindle /surface of the table max.: 50-450 mm numbers of pallets: 2 Stück/part total power requirement: 10 kW weight of the machine ca.: 2,5 t dimension machine xH: 2,4x1,8x2,5 m transport measurements machine: 2,45x1,8x2,5 m - E-cabinet - cooling device - chip conveyor manufacturer META (conveying height 1500mm; width 200mm) *

Condition: good (used), Year of construction: 2011, 850mm Swing, 525mm Max Cutting Diameter, 1310mm max turning length, 10 Station Turret, 102mm bar capacity, 2800rpm 22kW Spindle, Fanuc I series, Chsdpfx Anszhwghjdjd 3 jaw chuck, Low Volt Light, Tailstock,

Condition: reconditioned (used), Year of construction: 1990, functionality: fully functional, power: 5.5 kW (7.48 HP), saw blade diameter: 450 mm, Equipment: saw blade guard, ALTENDORF F-45 panel saw !Saw is fully functional! With digital display for the parallel fence Sliding table length: 2850 mm Year of manufacture: 1990 Chodjylbd Hepfx Andjd Power: 5.5 kW, motor with motor brake Saw blade: ø 450 mm Angle: 45° & 90° Operating options: Raising, lowering, tilting with handwheel Replaced wear parts: Dust extraction hood, bearings, motor brake, lower rollers, drive belt

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,065 mm, spindle motor power: 22,000 W, overall weight: 6,500 kg, number of axes: 3, Horizontal turning machine manufactured in 2014. This Okuma LB3000EXII features a maximum turning diameter of 340 mm and a turning length of 1,000 mm. It has a swing over bed of 580 mm and a maximum workpiece weight of 250 kg. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000EXII machine we have for sale. Contact us for further details. Capacities • Swing over bed: 580 mm • Swing over longitudinal carriage: 470 mm • Distance between spindle centers: 1,020 mm • Max turning diameter: 340 mm • Max turning length: 1,000 mm • Max workpiece weight between centers: 250 kgMain spindle • Spindle diameter: 120 mm • Spindle nose: JIS A2-6 (optional JIS A2-8) • Spindle bore: 80 mmAxes • Z rapid: 30,000 mm/min • X rapid: 25,000 mm/min • Feed range X/Z: 0.001–1,000 mm/revTurret • Type: V12 • Tool stations: 12 • Suitable for turning or driven tools (L- or M-tools) • External tool size: 25 × 25 mm • Internal tool size: Ø40 mmDriven tools / C-axis • Driven-tool speed: 45–6,000 rpm • C-axis range: 360° • C-axis indexing increment: 0.001° • C-axis rapid speed: 200 rpmTailstock • Taper: MT No. 5 • Travel: 1,015 mm • Motor: 2.9 kWElectrical / auxiliary • Hydraulic unit pump: 2.2 kW • Lubrication pump: 0.018 kW • Coolant pump: 0.25 kW (side chip discharge) / 0.8 kW (rear chip discharge) • Supply voltage (manual): 200 V • Transformer voltages: 220 / 240 / 380 / 415 / 440 / 480 V • Frequency: 50/60 Hz • Electrical cabinet protection: IEC IP54 Technical Specification Chedpez Ni D Tsfx Andjd Counter Spindle No Driven Tools Yes

Condition: used, spindle passage 25 mm turning speeds 5750 U/min Rest 4 straight turning atchm. - working travel . mm turret head 8 bar loader LNZ Hydrobar Parts catcher The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Chedpfoyquqwox Andsd apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team