Burnishing Machine

HEGENSCHEIDT 7489

Condition: good (used), Year of construction: 2011, Machine is in very good working condition. Descriptionis and technical details are on photos. Cjdpfx Abex I Rkpezorc

Condition: excellent (used), Year of construction: 2021, operating hours: 7,950 h, functionality: fully functional, Vertical Turning Center / Vertical Lathe Manufacturer: EMAG Model: VL6 (FANUC) Year of Manufacture: 2021 Operating Hours: approx. 7950 Total weight : 10,5T Main spindle 28,5 KW Power at 40/100% ED 41/28,5KW Torque at 40/100% ED 491/340 Nm Cedswzwu Ijpfx Abzorc Full power at spindle speed 800 rpm Max. speed 3100 rpm Slide Unit X, Z HP Turret Drive Unit for Driven Tools (C362) with internal coolant supply to the tool Max. speed: 9600 rpm Full power at 3000 rpm Torque at 100% ED 33/Nm/10,4 kW Torque at 40% ED 44/Nm/13,8 kW Torque at 10% ED 56/Nm/17,6 kW Tool holder unit for driven tools: 12 x BMT65 Component storage and transport system conveyor, O-Type (GO 240") carrier prism system for 10 components Workpiece height : max. 250 mm Workpiece weight: max. 40 kg Set (10 pcs) of carrier prisms for workpiece diameter: 150 - 300 mm Blow-off Device for Workpiece and Clamping Device (Pick-Up) Coolant Supply: 15 bar Coolant pump capacity: approx. 80 l/min at 15 bar Cooling unit (6.5 kW, water - air) Coolant double filter, manually switchable Filtering fineness 100 μm, with electric and mechanical contamination indicator Swarf conveyor, chain type - rear discharge Hinged belt version: rear discharge Chip discharge height 1,100 mm (with integrated coolant tank, capacity approx. 500 l) Emulsion Mist Extraction: Extraction rate approx. 800 m³/h Rinsing gun Workpiece Measurement with Probe Probe blow-off Tool life monitoring (sister tool management) 3-Color Signal Tower Quick-Jaw changing chuck SMW autoblok KCNS-N400-128 max. = 3500 rpm Set of hard base jaws Set of soft top jaws Software Package Operating Manual / Maintenance Manual

Condition: good (used), centerless grinding machine Crjdpfx Astrguvobzec

Condition: excellent (used), Year of construction: 2008, measuring range X-axis: 700 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 500 mm, ZEISS ACCURA MASS 7/9/5 Year of manufacture: 2008 Refurbished: 2025 Measuring range: X = 700 mm, Y = 900 mm, Z = 500 mm MPE E = 1.6+L/333 at 18-22 °C R0 = 1.7 MPE-P = 1.7 Cedpfxoyxdmfs Abzjrc MPE-THP = 2.5/50 sec RONt = 1.7 Machine features, equipment: C99 SR VII Controller automatic temperature compensation VAST XT GOLD sensor system probe changer magazine selectable probe accessories selectable calibration sphere HP Workstation with monitor Software: Calypso Basic, latest version Options: Calypso freely selectable Further accessories

Year of construction: 2019, operating hours: 4,525 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12, BAR PEELING MACHINE AND BAR STRAIGHTENING MACHINE IN SET The equipment is in perfect working condition and can be inspected under power. Fully retrofitted in 2019 (completely new mechanics and electronics) Working range: Ø 20 – Ø 80 mm Bars length: 2.5 – 6.0 m Processing tolerance: ISO h9 (possible h8) Peeling depth: up to 3.5 mm, depends on the steel type Steel types: carbon steel, bearing steel, spring steel, etc. Feeding speed: digitally adjustable 0.5 – 12 m/min Cutting head revolutions: up to 1700 RPM Cutting tools: two sets of 4 knives each with automatic digital positioning (triangular and long knifes) Automotive loading table with bar counter Feeding roller with motorized height adjustment Infeed pressure rolls – 4 vertical rolls with inverted DC motor Peeling machine, consists of: - Front guiding system - Peeling head with 4 knifes - Rear guiding system Bar extraction carriage Main motor and transmission Output pressing rolls - tween Unloading table with motorized height adjustment Collector with counter and automatic collection of finished bars Hydraulic unit – completely new Electric cabinet – new of two modules. Csdpfx Aewqb Scjbzorc

Condition: used, Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars with Profinet interface. 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: 8 bar stock pushers D12 8 rotating sleeves D12 1 10287026 (21712) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: 8 bar stock pushers D18 8 rotating sleeves D18 1 10536056 (21713) 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, consisting of: 8 bar stock pushers D23 8 rotating sleeves D23 1 10414481 (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 (21704) 1 set (8 pcs.) of external stops D12 mm for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. 1 10058206 (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Drill for drilling unit consisting of: 1 indexable insert drill D 15 mm 10 indexable inserts for steel Csdpfxsxnrtcs Abzsrc 2 solid carbide drills D 8 mm

Condition: used, TECHNICAL DETAILS - Number of spindles : 9 - Bar capacity : 26 [mm] MAIN SPINDLES 1 TO 6 - Nominal torque : 18.5 [Nm] - Max. spindle speed : 7000 [rpm] - Stroke X : 70 [mm] - Stroke Z : 125 [mm] MAIN SPINDLES 8 AND 9 - Nominal torque : 15 [Nm] - Max. spindle speed : 10000 [rpm] - Stroke X : 110 [mm] - Travel Z : 125 [mm] COUNTER SPINDLE 7 - Nominal torque : 15 [Nm] - Max. spindle speed : 10000 [rpm] - Stroke Z : 300 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Installed power : 109 [A] DIMENSIONS - Floor dimensions : 9.100 x 1.805 [mm] - Machine height : 2,800 [mm] Crodpjuhaq Isfx Abzsc - Machine weight : 18.500 [kg] MACHINE HOURS - operating hours : 82000 [h] EQUIPMENT - CNC Siemens Sinumerik 840D - Chips conveyor - Bar loader : SIR 36/33 F - Coolant tank : KNOLL VRF 450/2600 * with high pressure pump * with paper filtration * capacity : 2600 [l]

Condition: used, Year of construction: 2006, Technical details: grinding diameter: 5-55 mm grinding length: 500 mm total power requirement: 44 kW -- Intended use and general information -- Fully automated external and surface grinding of synchronous rings Centre height: 200 mm Grinding length: 500 mm Grinding wheel arrangement: right, 30° angled Grinding wheel dimensions: 600 x 30 x 203.2 mm Drive power: 7 kW X/Z axis drive: ball screw Travel speed: 0.01 - 10,000 mm/min. Resolution: 1 µm Concentricity of workpiece spindle: < 1 µm Workpiece changing system: Fanuc robot Control: Siemens Sinumerik 840-D Machine weight: 7,000 kg Cedevg Thispfx Abzorc Centre height: 200 mm Grinding length: 500 mm *

Condition: excellent (used), Year of construction: 2019, operating hours: 13,000 h, functionality: fully functional, bar diameter (max.): 22 mm, INDEX MS22-8 Mfd. 2019 2 NCU 2 Syncrons 2 Y-Axis Control: Siemens Solution Line Knoll System Crsdpfx Ajx H H Nrebzsc Bar Feed: IEMCA SIR rack loader (12-ft) 22,000 on-hours 10,000-15,000 Hours

Condition: like new (used), Year of construction: 2019, operating hours: 31,241 h, functionality: fully functional, See AB in the attachment Crjdpfxoxqm Tvo Abzsc