Imagesetter

Heidelberg Suprasetter 106

Year of construction: 2011, condition: good (used), machine/vehicle number: PU000567, Thermal CTP: Computer to Plate Recording System: External Drum Hsdpfxofh Dmqe Adwsng Dual Casette Loader DCL 106: Two Plates With Fully Automatic loading PST 480 B Plate Stacker Technical Details: Throughput option (plates/h in max. format) : 12 Plates / Hour Min. Plate Format : 370 x 323 mm Maks. Plate Format : 930 x 1060 mm Plate Thickness : 0,15 - 0,3 mm Technical data can vary according to job, consumables and possible other factors

Condition: used, Year of construction: 2004, functionality: fully functional, Heidelberg Dymatrix 113 CSB Pro – FULLY REFURBISHED Type of machine: Embossing and die-cutting system / automatic sheet die-cutter Machine number: 400018 Year of manufacture: 2004 Machine specifications Maximum strokes per hour: 9,000 sheets/h Length without feeder: approx. 5,190 mm Length with feeder: approx. 7,770 mm Maximum width: approx. 2,400 mm Maximum height: approx. 3,200 mm Maximum height with access window open: approx. 3,930 mm Weight without feeder: approx. 30,400 kg Weight of feeder W4: approx. 3,000 kg Internal closing frame width: 820 x 1,134 mm Maximum die-cutting tool size: 816 x 1,130 mm Maximum die-cutting area: 800 x 1,120 mm with gripper margin Gripper margin adjustable from: Standard 11 – 17 mm with 13 mm wood before 1st knife Option 8 – 14 mm with 10 mm wood before 1st knife Rule height: 23.8 mm Maximum pile height (feeder, incl. pallet): 2,000 mm Maximum pile height (delivery, incl. pallet): 1,700 mm Maximum pile weight (feeder): 1,000 kg Maximum pile weight (delivery): 1,000 kg Maximum rest pile height (feeder): 450 mm Maximum rest pile weight (feeder): 450 kg Maximum auxiliary pile height (delivery): 200 mm Maximum auxiliary pile weight (delivery): 200 kg Pallet sizes Feeder: max. 800 x 1,200 mm (EURO pallet) Delivery: max. 800 x 1,200 mm (EURO pallet) Maximum pallet height: 170 mm Drive and electrical supply The machine is powered by a frequency-controlled motor via a flywheel. Between the flywheel and the machine, a pneumatic clutch with spring-loaded brake is installed, which is used to engage and disengage the machine. The motor runs continuously. The control cabinet placed at the machine contains, except for a few devices, all control components for the die-cutter and feeder. Command and indicator devices are located on the machine itself, distributed across the control panels as required. Control cabinet Equipment: Power supply, main switch, fuses, motor protection, PLC control Hnodpfev T T N Hjx Adwjg Electrical rating: 3 phase, 400 V AC, 50 Hz, 63 A Control voltage: 24 V DC; 230 V AC; 50 Hz Dimensions: 2,800 x 600 x 2,200 mm The machine is in excellent condition. A test run can be arranged at any time. Various accessories are included. Patent-protected chain guide rails from QTM have been retrofitted. Price: On request

Condition: used, Year of construction: 2013, Preset Plus in feeder Preset Plus in delivery material thickness: 0.03 – 0.60 mm Image control Wallscreen XL2 Intelli start Instant gate Color fast solution Color assistant Pro Press Center NetProfiler double sheet control Perfect Jacket Blue PowderStar AP 500 Duo CAN AirStar Pro CleanStar StaticStar Compact (feeder & delivery) CombiStar, CAN open Prepared for CutStar Hedpfx Ajxvz Dtjdwong

Condition: excellent (used), Year of construction: 2003, Brochure production line Horizon VAC 100 A+M (year 2009) with stitching-folding station SPF 20A and trimmer FC 20A Hedev Sqr Nepfx Adwjng

Condition: used, Heidelberg S Cylinder Hnsdpfx Adjxuqqysweg

Year of construction: 2006, condition: excellent (used), Bobst Autoplatine Speria 106 E STANDARD EQUIPMENT MACHINE - Centerline system for quick job changeover. - Electronic sheet travel monitoring system. Hnsdpfx Adjxl Taljwsg - Adjustable centering at the stripping station. - Control cabinet air conditioning unit. - Bobst electronic control system C.U.B.E. (Control Unit Bobst Electronic). This microprocessor-based Bobst system allows the operator to easily manage, visualize, and monitor the machine’s various functions and components. - Main motor with frequency inverter control. FEEDER - Pile tray with handle for easy manual lateral alignment during production. - Synchronization device ensuring proper sheet arrival to the front lays when the machine is stopped. - Automatic pile lifting controlled by pressing foot. - Rear pile guides (operator side and opposite operator side). - Adjustable side blowers with Centerline markings. - Suction unit. FEED TABLE - Feed table with anti-static stainless steel covering. - Feed table entrance equipped with lateral ramps. - Four front lays, pairwise adjustable, with front register control. - "Pull" guide (operator side), adjustable with Centerline markings and side register control. - Double sheet detector. - Support plates at platen station entry. - Sheet hold-down mechanism (guides sheets to front lays). - Upper frame with manual lifting device. - Upper transport system for paper, paperboard, and corrugated board. - Transport belts with lateral guides and automatic tensioning system. PLATEN - Gripper reopening device. - Centering and locking for equipment. - Locking the chase to the upper beam. - Cutting force measurement with strain gauge. 1 synthetic supporting plate. 1 upper chase: fixed bottom plate. 1 cutting plate. WASTE STRIPPING STATION - Air-cylinder-driven upper frame lifting. 1 upper pull-out frame (with crossbars and clamps). 1 lower pull-out frame. DELIVERY - Pile tray. - Front jogger. - Adjustable rear and side joggers with Centerline markings. - Braking brush. - Manual non-stop rack. AVAILABLE EXTRAS B MACHINE 1 B-1 Raised machine base C FEEDER 1 C-4 Manual non-stop device E PLATEN 1 E-5 Compensating plate 1 E-55 Micro-adjustable supporting plate centering F WASTE STRIPPING STATION 1 F-31 Quick-lock device for the upper pull-out frame

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Hnedpfxoww E Nrs Adwog Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations

Condition: used, Year of construction: 2006, Falzmaschine / Folding machine Heidelberg TH82/6-4-VFZ Year 2006 Round Pile Feeder  Folding Type 6 - 4 buckles - 1 knife Press Delivery TH70 Online-Video-Inspection by Skype-Video Hnedpfx Asuhiqwsdwsg We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, The Matrix 530 Laminator is a versatile and efficient machine designed for high-quality lamination tasks. This machine is currently in stock and located in Germany. It can handle a maximum sheet width of 550 mm and operates at a maximum speed of 10 meters per minute, ensuring quick and efficient lamination processes. The 530 Laminator supports a maximum film width of 500 mm and is capable of one-sided lamination. It features mechanical, adjustable pressure settings to accommodate various material thicknesses, starting from 135 g/qm2. The machine is compatible with foils that have a core diameter of 76 mm, making it a reliable choice for a wide range of lamination applications. Format: 550 mm Equipment: Max. sheet width: 550 mm Max. speed: 10 m/min Max. film width: 500 mm Lamination: one-sided Pressure: mechanical, adjustable Material: from 135 g/qm2 Hedpfxjwc Alno Adwong Core diameter of foils: 76 mm:

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Screen PT-R4600 E/ Avalon N4-30 E S/N 462xxx, 16 Fiber coupled ciodes, Hsdpfxjxlf Rvs Adwjng Plate count 10.792 Exposure time 1.045h Screen Blackbox Network Interface EP-B101 RIP on request. All offers subject to prior sale