Measuring probe

Heidenhain TS 220

Condition: good (used), Several measuring probes from Heidenhain are available for sale. - Manufacturer: Heidenhain - Type: TS110 / TS111 untested = €450 each TS110 / TS111 tested = €750 each TS220 / TS230 = €950 each ! Since several probes are for sale, please specify the desired type! Kwsdpfx Adshlafnowjt - Holder: SK50

Condition: excellent (used), Year of construction: 2015, operating hours: 167 h, For sale at a bargain price, a wireless lawnmower controlled by a remote control, is ideal for difficult conditions such as steep roads or dangerous places. (see Video) It has 4-wheel drive and a long range remote control. It will mow up to 1500m per hour. - Kwjdpfsvv Hi Eex Adwot A bargain price because of the winter season, it will be 20% more expensive in the spring! So it is recommended to buy this equipment now! Of course, fully functional and ready for further work. - Straight from a bankrupt company from Sweden. The new one cost them over 25 4-wheel drive, remote control - everything is 100% functional. The lawnmower was purchased in December 2014 and only used in the spring of 2015! Key data: Performance / Consumption Engine Briggs & Stratton 950 Displacement 223 cm3 Fuel tank capacity 4 l / 1 gallon Fuel unleaded petrol Hydrostatic transmission Speed 0 - 4 km/h / mph Wheel steering Blade 1 rotary Cutting width 56 cm / 22 in Cutting height 4 - 9 cm / 2 - 4 in Manual clutch Option Mulching kit 2 Capacity up to 1500 m/h Fuel consumption 1 l/h Gradeability 30 degrees / 58% Dimensions 1040 x 900 x 600 mm Weight 125 kg Transportability in Poland and the European Union!

Condition: new, machine/vehicle number: Baureihe GSL 300 / Neumaschine, The cutting mills in the GSL series 300/400 to 300/800 are primarily intended for the shredding of production-related scrap material in the injection molding and blow molding sectors. In addition to the key advantages of the GSL series, the slow-running cutting mills GSL 300/400, GSL 300/600 and GSL 300/800 are particularly suitable for large-area parts, such as car door panels, bumpers or hollow bodies. Kodpfjghgbhex Adwjwt The "V-arrangement" of the rotor blades keeps the pre-shredded material in the center of the rotor. This significantly reduces wear on the grinding chamber walls when grinding glass fiber reinforced plastics. Material sticking to the side walls is avoided. The staggered arrangement of the rotor disks means that only individual blades are used at any one time, so a higher cutting force is available in each case.

Condition: used, Year of construction: 2007, turning diameter 300 mm swing over bed 430 mm swing diameter over slide rest 300 mm control SIEMENS, SINUMERIK 840 D travel -x axis 160 mm travel -z axis 510 mm Part length max. 480 mm main spindle bore 53 mm main spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm main spindle drive 15 kW sub spindle bore 53 mm sub spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm sub spindle drive 15 kW Kwodpewx R Rkefx Adwjt C-axis resolution 0,001 ° C-axis rapid feed 1000 U/min tool turret 1 x 12 Stat. number of driven tool stations 1 x 12 tool shaft (cylinder shaft DIN 69880) VDI 25 speed of driven tools 0 - 8000 U/min max. torque 16 Nm output 4 kW feed power X/Z axis 4000 / 6000 N rapid traverse X-axis 24 m/min rapid traverse Z-axis 30 m/min total power requirement 38 kVA weight of the machine ca. 4 t dimensions of machine L x W x H 2,65 x 1,84 x 2,32 m Accessories: collet fixture 173 E on main spindle, collet fixture 163 E on sub spindle, bar loading magazine make FMB, model turbo 3-36/3200 A, YOM 2018, for bar dia. up to 36 mm and bar length up to 3200 mm, various toolholders for turret (no driven toolholders), coolant

Condition: used, Year of construction: 2013, travel -x axis 800 mm travel -y axis 520 mm travel -z axis 550 mm control HEIDENHAIN - iTNC 530 Kjdpev Td Iaofx Adwswt number of spindle speeds 10.000 U/min numbers of positions in the tool changer 24 520 x 950 (B x L) mm Milling machining centers - vertical | POSmill - C 800 Kompakt equipped with 24- way tool changer and ITC. The machine is in a well-maintained condition. For further technical details, please refer to the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C800 | C-800 | C800Kompakt | C -800-Kompakt

Year of construction: 1999, condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Kedpfoilhfcex Adwjwt

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Kjdpfxsvf D Ano Adwswt

Condition: excellent (used), Year of construction: 1996, Attention! Special price due to warehouse clearance. Kwsdpfx Adohq A T Aewjt Control: CNC path control including monitor ZIMMER + KREIM TECHNICAL DATA Travel range X-axis 570 mm Y-axis 400 mm Z-axis 415 mm C-axis 360° Resolution X, Y, Z 0.001 mm C 0.001 degrees Clamping table surface area 840 x 600 mm Dielectric above table 360 mm 4 T-slots 10 mm Max. table load 1000 kg Distance table – quill 620 mm Automatic electrode changer Number of electrodes 50 Electrode weight – without rotation 100 kg Electrode weight – with rotation 15 kg Rapid traverse 800 mm/min EQUIPMENT/ACCESSORIES  6-fold pallet changer  50-position automatic electrode changer  C-axis  ADAPTI MAT 04 – monitoring and regulating device  PEG 90 – generator  EROWA IST chuck with 3 holders  Machine light  Electronic handwheel  Cooling unit for dielectric  Automatic CO2 extinguishing system  C-Box Zimmer + Kreim  14-fold flushing distributor  15-fold flushing quantity regulator  1 UPC pallet clamping system  2 pallets  Leveling elements  Documentation

Condition: new, machine/vehicle number: Baureihe GSC / Neumaschine, The compact cutting mills in the GSC series are completely soundproofed cutting mills and therefore particularly quiet. The integrated soundproofing ensures ideal accessibility to the cutting mill itself and for changing the blades and screens thanks to its well thought-out design. The noise protection is based on the use of the latest soundproofing materials. The housings, manufactured in a stable steel/welded construction, in conjunction with the V-cut rotors (except GSC 300/300), enable a long service life and universal applicability. The tangential housing geometry means that even bulky feed materials are easily accepted and shredded by the rotor. All machines in the GSC series always deliver high-quality ground material - regardless of whether the feed material is injection molding or blow molding waste, profiles, plates or films. The types in the GSC series are cost-effective, very reliable, easy to clean and have a long service life. Integrated sound insulation: The integrated sound insulation ensures a pleasant working environment with a low noise level. The optimal design ensures ideal accessibility to the machine. Mobile compact design: The integrated sound insulation makes the cutting mills compact and mobile. The machines can be transported to any location using a pallet truck or forklift. Kwsdpfx Adsghgbwowet ZERMA offers a variety of options such as extraction systems, conveyor belts, metal detectors, fine material separators.

Condition: excellent (used), Year of construction: 2007, Universal milling machine Manufactured by KUNZMANN. WF 650 Year of manufacture 2007 Technical specifications Manufacturer Kunzmann Type WF 650 Year of manufacture 2007 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Clamping area 1000 x 600 mm Spindle mount SK 40 Spindle speeds 5 - 6500 rpm Quill stroke 60 mm Vertical head swivels +/- 90 Max. table load 400 kg Feed rates - longitudinal/transverse/vertical 0 - 4000 mm/min Rapid traverse 25 / 25 / 20 m/min Distance between table and vertical milling spindle 100 / 550 mm Distance between table and horizontal spindle 270 / 720 mm Number of tool magazine positions: 20 Tool diameter: 95 mm Tool diameter with 2 free positions: 135 mm Max. tool length: 300 mm Max. tool weight: 7 kg Spindle power: 13 kW Total power requirement: 20 kVA Machine weight: approx. 5.5 t Machine dimensions: L x W x H: 3.80 x 2.70 x 2.40 m Equipment - Heidenhain iTNC 530 control system - Operating instructions - Enclosure - Vertical head with extendable spindle sleeve - Hydraulic tool clamping - Fixed table - Electronic handheld control panel Ksdpowhm S Nsfx Adwjwt - Coolant system - Chip conveyor All information is subject to change without notice. A demonstration is available at any time in our showroom.