Load capacity: 1000 kg
Graduation reading: 100 g
Platform size: 1250 x 950 mm
Platform height above floor: 230 mm
Platform height with elevation from the underbody: 540 mm
Space required: 1250 x 1160/1250 x 1900/2180 mm
Weight: 270 kg
Measuring stand, stand, dial indicator holder, dial indicator, test stand, dial indicator holder, dial indicator holder, measuring stand, magnetic stand, dial indicator stand, magnetic stand
-With: switchable magnetic base and prismatic sole
-Prisms: 17/50 mm
-in: wooden suitcase
-Dimensions: 140/120/H85 mm
-Weight: 4.3 kg
Ref. -No.: 10157
Brand: CARL ZEISS
Type of control: HP 9000 Serie 700
Control: Betriebsystem HP-UX.9.05
Storage location: Halberstadt
Country of origin: Deutschland
Turntable: 1000x2100 mm
Machine weight: 4.800 kg
Machine Height: 3050 mm
Table height above the floor: 850 mm
X-Axis: 850 mm
Y-Axis: 1800 mm
Z-Axis: 600 mm
X-axis as a longitudinally movable portal
Y-axis cross slide in the portal
Z-axis as measuring head quill (vertical)
Used Tool Presetter in very good condition.
Checked by a factory mechanic.
Test report available.
Pneumatically Activated Axis Movement
Spindle Disk Brake
LCD Monitor 22"
Label Printer DYMO
1 off toolholder for HSK 32
Other tool holders in other sizes are available from the manufacturer.
Axis Resolution 1µ
Software: Speroni Pro Vision
PC DELL Optiplex GX 745 – Pentium Dual-Core CPU E 5200 / 2,50 GHz, 1,00 GB RAM
(PC was changed approx. 5 years ago)
measuring range X-axis 300 mm
measuring range Y-axis 300 mm
Table dimensions 800 x 800 mm
taper ISO 30
voltage 220 V / 50 Hz
total connected load 0,3 kW
weight 0,5 t
dimensions of the machine ca. 1,5 x 1 x 1,6 m
Use: no definition
Tool presetter with taper SK 30, SK 40 is also optionally possible,
Display of measured value ZOLLER DA 6050 / 0266,
serial no: H320/066
The KMG stands on a vibration damping system.
RENISHAW PH10M rotary pivot system
Internal cable routing in the quill
2 pieces temperature sensore magnetic
Measuring probes TP7 - 9 pieces
Measuring probes TP200 - 5 pieces
Several probes and accessories
2 pieces ACR Reack, 1 piece PCI connector with card
Software package with dobgle MCosmos-3, Geopak, CAT 1000PS
X-Y 250 x 125 mm
-Projection screen Ø 300 mm
-Goniometer, rotatable through 360° with adjustable vernier 1“
-Free working distance 130 mm
-LED diascopic light
-10x and 20x magnifications
-ST5 measuring stage with x and Y adjustment, runs on high precision needle bearings incl. scales with analogue output
-Integrated edge sensor
-Max. workpiece weight 20 kg
-M2 measuring software: quick selection, measurement and evaluation of eleme...
Used measuring machine
Internal machine number: m3077
Manufacturer Zett Mess
Type AMS 15/12
year of construction 1986
plate 4.000 x 2.500 mm
plate height approx. 620 mm
X 3.200 mm
Y 1.200 mm
Z 1.500 mm
Weight approx. 7,5 t
Item location: 58730 Fröndenberg/Ruhr
The machine can be inspected and tried out under power.
A prior sale remains reserved.
There is the possibility to examine the items for sale, on site expertly. Specific questions should be clarified in advance. The information, s...
max. wheel diameter 600 mm
gear width 500 mm
max. module 20
min. module 0,5
max. workpiece weight 450 kg
pitch angle 0-90 °
total power requirement ca. 4 KVA
weight of the machine ca. - t
dimensions of the machine ca. - m
X-Axis Movement 2000 mm
Y-Axis Movement 1200 mm
Z-Axis Movement 1500 mm
Outer length 2760 mm
Outer width 1200 mm
This ZEISS Carmet CNC Measuring Machine was built in the year 2003. It is equipped with a control unit OF THE SAME BRAND. This model comes with a Measurement range of X = 2000 MM, Y= 1200 MM, Z = 1500 MM. It presents good conditions.
measuring range X-axis:300 mm
measuring range Y-axis:400 mm
Table dimensions:450 mm
tool diameter:ISO 40 mm
total power requirement:1,5 kW
dimensions of the machine ca.:1,8 x 1,0 x 1,8 m
Machine with indexing device for ISO 40 and collet clamping
- pneumatic saddle and tool clamping
- measuring computer with screen and printer
workpiece weight 0,3 - 30 kg
workpiece length 800 mm
diameter 400 mm
balancing speed variable 100 - 3000 U/min
dia. axle journal 7 - 40 mm
total power requirement 2,0 kW
weight of the machine ca. 1,45 t
dimensions of the machine ca. 2,65 x 1,10 x 1,60 m
Balancing unit 1,50 x 0,80 x 1,30 m
Control 0,60 x 0,65 x 1,80 m
- Serial-no.: R 03/11
Protection class IP 20
Max. Display sensitivity: 0.2 gmm
belt drive 100 - 3300 rpm.
Inside micrometer, micrometer screw, inside diameter
-Measuring range: 35-50 mm
-Measuring range: 50-70 mm
-Measuring range: 70-100 mm
-Measuring range: 100-145 mm
-One revolution of the drum corresponds to: 0.5 mm
-with locking device
-Weight 0.8 kg
3D profilometer Keyence VR5000
Incl. evaluation software, reference manuals, certificates etc.
Machine has run very little, accordingly very good condition from air-conditioned laboratory (no production-related Bebereich!)
spindle passage 22 mm
bar feed max. 64 mm
max. bar length 3.000 mm
turning speed range 23 - 4.457 min/-1
power capacity - main spindel 4,0 kW
number of cross-slides 3
0 35 mm
number of toolpositions 6 pos.
0 60 mm
threading cutting device:
thread dia. M14 / M18 mm
total power requirement 8,0 kW
weight of the machine ca. 1,5 t
dimensions of the machine ca. 6,0 x 2,0 x 2,0 m
bar feeder interface
bar feeder Iemca Boss
measuring range X-axis / mm
measuring range Y-axis / mm
Table dimensions / mm
tool diameter / mm
Manufacturer: DMG Microset
Type VIO 20/50 Linear Toolshrink
Year of construction: 2012
Adjustment range: Ø 420 mm
Measuring length: 500 mm
- Linear drives in the X and Z axes for maximum dynamics and positioning
- ISS spindle with mechanical clamping (5000N)
- Collision protection during motorized travel (minimum speed 180mm / s)
- Automatic fast focusing via autofocus
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.