Balancing Machine for car wheels

Heinl ATH-550

Condition: new, Year of construction: 2022, fuel type: diesel, number of cylinders: 6, cubic capacity: 12,816 cm³, rotational speed (min.): 1,800 rpm, overall weight: 1,015 kg, type of cooling: water, Industrial type Bdjdpfeyymp Eox Andji Date of manufacture: 12/2022 Condition: new Type of engine: OM460LA Serial number: 458.991 Please contact for more information Worldwide delivery

Condition: like new (used), functionality: fully functional, mileage: 70,000 km, first registration: 05/2019, color: grey, fuel: diesel, fuel type: diesel, emission class: euro6, Year of construction: 2019, Volkswagen T-ROC IQ Drive Year: 05/2019 Color: Metallic Grey Fuel: Diesel Engine: 1.6 TDI Output: 85 kW (116 hp) 6-speed manual gearbox + reverse Seating capacity: 5 Emissions Standard: Euro 6 ABS Adaptive cruise control Removable towbar Bluetooth CD player Radio Lane Assist On-board computer Bdedpfx Aneymf Avsdsi Navigation system Rear parking sensors Front-wheel drive Multifunction leather steering wheel Electric windows Electric mirrors Air conditioning Airbags Power steering Brake Assist Central locking Electronic differential lock (EDL) Tyres: 215/55 R17 Mileage: 70,000 km

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Bjdpfx Aneu Ngybedsdi Equipment: - oil tank Ø 300 x 600mm - control panel i.D. *

Condition: used, Column drilling machine ALZMETALL, type AB 3 ESV Machine no. 15967, year of manufacture 1977 Drilling capacity 32 mm Spindle mount MK 3 – short quill Distance from spindle nose to table 545 mm (short quill) Distance from spindle adapter to table 395 mm (MK adapter) Overhang 290 mm Quill stroke 160 mm Table size Ø 545 mm Column diameter 220 mm Spindle speed 55 – 1450 rpm, continuously variable Bedpsharwvefx Andsdi Motor power 1 / 1.6 kW Power connection 380 volts, 50 Hz - Spindle speed controlled via 2 gear stages, 2 motor speeds, and continuously variable via a variator gearbox - Pre-selection stage for high torque at low speeds - MK adapter from MK3 to MK4 - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Rotatable drilling table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Lighting for the work area Space requirement L x W x H 1150 x 650 x 2000 mm Weight 850 kg Good condition

Condition: used, Year of construction: 2008, x-travel 400 mm y-travel 300 mm z-travel 400 mm spindle taper ISO 40 spindle turning speed range 40 - 2.000 U/min table-size 750 x 320 mm feeds -stepless- 10 - 380 mm/min rapid traverse 1.200 mm/min power capacity 2,2 kW quill stroke 80 mm Bsdpfsxa Hf Rex Andedi voltage 400 V total power requirement 4,7 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 1,15 x 1,40 x 1,85 m - Serial-No.: 148373 - 3-axis digital display - Horizontal milling device - Milling head swivels ±45° - Coolant device

Condition: as good as new (ex-display), Year of construction: 2026, The CE08 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. It is similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE08-series L/min CE08-200 bar 15 7.5 hp water blaster unit 50Hz Bsdpfx Ashf Nakondsdi CE08-200 bar 15 7.5 hp water blaster unit 60Hz CE08-200 bar 15 7.5 hp water blaster unit 50Hz with start/stop CE08-200 bar 15 7.5 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 6.0 kW Volt: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 22,372 h, laser hours: 11,345 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 16,000 kg, total length: 11,600 mm, total width: 5,200 mm, total height: 2,200 mm, working range: 4,00,02,000 mm, Equipment: cooling unit, Standard Features: • Enclosed machine frame with integrated laser unit • Laser unit: TruFlow 2000 CO₂ laser with high-frequency excitation, maintenance-free turboradial blower, reflector telescope, cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor belt for small parts/waste • Drive: Maintenance-free three-phase servo motors • Cutting head quick-change device Laser cutting head with 5" lens and laser cutting head with 7.5" lens • Programmable cutting gas pressure setting • ControlLine capacitive height control and process control • Automatic focus adjustment with FocusLinePlus • Laser power control • Positioning laser • NitroLine high-pressure cutting • Fast processing with SprintLine • Automatic production of smaller holes • PlasmaLine plasma sensors • Automatic sheet metal surface and edge detection • Programmable Performance cycles • Microweld • Spray device for safe thick sheet processing • Automatic blow-off system • Residual heat extraction • Sinumerik 840D control system: Open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice • TruTops Laser lite workshop programming Safety: • Multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin • RJ45 network connection via installation via teleservice • 3.5" floppy disk drive • TFT color display More powerful lasers: • TruFlow 4000, including NitroLine Plus, nitrogen beam tube ventilation and lens monitoring sensors Extended machine equipment: Bedjv Sm Rujpfx Andodi • PierceLine Process Control System • A total of 2 Machine auxiliary pallets, structural steel webs • Crane-mounted traverse for manual pallet handling • Pneumatic cutting

Year of construction: 2025, operating hours: 4 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: H2,5TMNI, Universal testing machine H 2,5 TMNI L Please always send your mail address. mechanical construction: Single spindle universal testing machine with backlash-free ball screw in C-frame design with spindle protection and brushless drive motor, Fmax = 2.5 kN 1 working chamber up to nominal load: Working chamber depth: 105 mm max. test stroke without test tools, adapter and KMZ: 1375 mm max. test area height (between lower fixed and moving crosshead) without test tools, adapter and KMZ: 1375 mm Travel speeds: Test speed 0.005 - 1200 mm/min up to nominal load return speed 1200 mm/min Bedpfx Aomdn Trendjdi Force measurement: Measuring range depending on the force sensor used 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DAkkS calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 420 mm, spindle bore: 103 mm, turning diameter: 660 mm, turning length: 3,000 mm, spindle speed (max.): 1,320 rpm, spindle speed (min.): 9 rpm, spindle motor power: 15,000 W, Equipment: rotational speed infinitely variable, Immediately available. No waiting, start machining right away! Machine: MEXPOL TUB 660 x 3000 mm Bdjdpsyr Dmksfx Andoi with stepless speed adjustment via frequency inverter Bed width: 560 mm Distance between centers: 3000 mm Center height: 330 mm Spindle bore: 103 mm Workpiece weight: up to 3000 kg Spindle nose: DIN 55027/11 Speed range: 9 – 1320 rpm Main drive: 15 kW Feed rate: longitudinal feed 0.039–18 mm/rev, cross feed 0.02–9 mm/rev Rapid traverse: longitudinal 3800 mm/min, cross 1900 mm/min Tailstock: Quill diameter 105 mm, Stroke 225 mm, MT6 Thread cutting: metric, inch, module, DP Standard equipment: frequency inverter, quick-change toolpost size C, coolant system, interlocked chuck guard, work light, change gear set, CE conformity Dimensions: 4970 × 1650 × 1500 mm Weight: 4750 kg Fixed steady rest (roller jaws) Ø 20–200 mm Fixed steady rest (roller jaws) Ø 180–430 mm Delivery: Immediate from stock (while stocks last)

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Bedpfxsu N D Rqe Andodi Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *