Condition: new, MECHANICAL SCREW PRESS FOR STACKING U-JOINTS PRK-2 Designed for staking u-joints as well as assembly and dissasembly of driveshafts during repair and remanufacturing process Press can be used for the assembly and replacement of cardan joints in the repair and production of cardan shafts, as well as for other processes in which the pressing operation is used. This press is designed for use in a repair shop and does not require any special knowledge for operation and maintenance. Manual feed ensures precision and quality of stacking process. The pressing mechanism is based on a ball screw, which has a high efficiency and a long service life. Technological tooling for replacing stacked u-joints: • Centering housing for the punches. • Set of 8 bits for punching crosses with diameters from 20 to 31 mm for drive shafts. • Set of 4 bits for punching crosses with diameters from 15 to 19 mm for steering shafts. Csdjpbwdlspfx Ab Sehc SPECIFICATIONS Working area (L x B x H) 322х312х350 mm Maximum compression force 5500 kg Maximum force on rupture 2000 kg Dimensions (length x width x height) 402х488х1478 mm Weight 160 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Condition: good (used), Rear silencer, exhaust system, muffler, silencer, muffler, couplings, pipe coupling, pipe sleeve, pipe connection, exhaust clamp, pipe connector for exhaust system, double clamp -Manufacturer: HJS, pipe connector exhaust clamp stainless steel double clamp 50 x 90 mm -Type: 83122858 -Size: 50/5x54/5x90 -Quantity: 24 x clamp available Chjdjxhcz Rspfx Ab Sec -Price: per piece, minimum order 3 pieces -Dimensions total: 90/83/62 mm -Weight: 0.6 kg/piece

Condition: new, Year of construction: 2025, warranty duration: 12 months, water tank capacity: 300 l, type of input current: three-phase, total width: 2,360 mm, total length: 970 mm, total height: 2,030 mm, frequency: 50 Hz, DPF Filter Regeneration Machine - MOTSLER SLR Premium The MOTSLER SLR Premium is a high-quality, reliable, economical, and very user-friendly machine designed for the professional cleaning of DPF, FAP, GPF, SCR, DOC, EURO6 filters, as well as catalytic converters. It supports all filter sizes—from passenger cars, vans, trucks, to construction machinery and equipment. The unit is entirely made of stainless steel and built using high-quality components sourced from leading Polish and European manufacturers such as Schneider, Fatec, Weintek, Ebara, Calpeda, Eaton, Wieland, and Hager. The SLR Premium machine carries out the complete DPF cleaning process, which includes: initial measurement, cleaning, drying, final measurement, and concludes with a printed DPF cleaning report. Technical Specifications: - Device dimensions (L/W/H) [mm]: 2360 x 975 x 2031 - Chamber dimensions (L/W/H) [mm]: 1600 x 830 x 1090 - Machine construction: 304 stainless steel - Weight: 550 kg - Power supply: 3 x 400V 50 Hz - Max. power: 11 kW - Optimal power consumption: 6.9 kW - Circuit protection: 20 A - Tank capacity: 300 liters - Pump performance: 250 L/min - Hose diameter: 1.5” DN 40 - Water drain: 2” DN 50 - Drying temperature: 100 – 120°C - Water temperature: 10 – 50°C - Max. air flow (drying): 325 m3/h - Air pressure (drying): 300 mbar - Drying and cleaning: bidirectional manual - Contamination measurement: on dry and wet DPF filter - Filtration: 250 – 1 micron - Pre-filtration: 2 pre-filters - Filter replacement frequency: approx. every 40–100 cycles - Noise level: 70 dB - Min. ambient temperature: 3°C - Declarations of conformity: EC, CE Equipment: - Single-pipe SWS system - Professional PFS filtration system (cartridge replacement every 40–100 DPF filters) - 7” touchscreen display - Thermal printer for cleaning reports - Caster wheels - Adjustable leveling feet - Tempered glass windows - 2 cleaning hoses - 17 adapters for connecting DPF filters - 8 rubber seals for adapters - 4 DPF filter retainers - 4 adapter clamps - Inspection camera - Foam neutralizer - 2 pre-filters - Main filter cartridge - DPF CleanX cleaning fluid Equipment / Adapters: Codpetrmrijfx Ab Sshc - All adapters for passenger cars and trucks - Set of rubber seals for adapters - DPF filter locks to prevent movement WHAT DISTINGUISHES THE SLR PREMIUM MACHINE? Build Quality: - Constructed entirely from stainless steel with components from leading European manufacturers: Schneider, Fatec, Weintek, Ebara, Calpeda, Eaton, Wieland, ensuring top-tier precision. Single-Pipe SWS System: - All processes are conducted through one hose, eliminating the need to stop the machine, open doors, or reconnect the DPF filter between cleaning, drying, and measurement hoses. PFS Filtration System: - Multi-stage filtration system featuring two reusable stainless steel pre-filters and a main filter with a 4.8 m² area, supporting from 40 to 100 DPF filters per cycle. Side Ventilation: - Enables operation in low-ceiling spaces. Steam does not condense on the machine’s top, avoiding water ingress into electronics, electrical short circuits, or machine damage.

Condition: new, functionality: fully functional, Comec RV516.ASM Valve refacing machine – new machine With standard equipment and variable valve speed device. Chedpsnbdlmefx Ab Sjc Technical details: Valve stem diameter: 4-16 mm Valve stem length: 55-230 mm Valve head diameter: 114 mm Face angles: 0° - 60° Grinding wheel speed: 2800 RPM Main grinding wheel diameter: 215 mm Voltage – Hz – phases: 400V/50Hz/3 Fázis Main dimensions: W x L x H: 700 x 600 x 700 mm Weight: 142 kg If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: ready for operation (used), Plant Liquidation – Complete Equipment for Tire Retreading For sale is a comprehensive production line for tire retreading, ideally suited for businesses specializing in tire renewal. ⸻ Machinery & Equipment • Buffing/Rasping Machine: Tread and casing preparation (roughening and buffing) • Repair/Skiving Station: Grinding and patching • Extruder/Filling Unit: Cushion gum processing • Cementing/Adhesive Station • Building/Banding Station: For precured tread application • Envelope/Vacuum Station: Envelope and sealing operations • Autoclave including accessories (tire rings, vacuum pump, pipelines, carts) Additional Workstations: • Casing Spreader / Inspection stand • Pressure & Leak Test Station • Final Inspection (Tread and Sidewall Check) Plant & Auxiliary Equipment: • Compressors (Kaeser & Atlas Copco brands) • Extraction and dust removal system at grinding stations • Tire and material carts, shelving units • Tool and small parts set (valves, gaskets, clamps) • Transport and cooling racks • Various vulcanization and operating accessories Documentation: Photos, parts list, and additional documents available on request ⸻ Condition & Delivery • Used, fully operational • Inspection possible at any time • Accessories available • Dismantling, loading, and shipment easily arranged • Shipping via freight forwarder possible ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net, plus 19% VAT. Subject to change and errors excepted. Chodpfjxk Tuaox Ab Ssc

Condition: excellent (used), Working lamp Make Waldmann type 008308 50 watt 24 volt height 250 mm width 130 mm Depth 130 mm Codpfx Abjip Dbts Sshc

Condition: new, The POSEIDON-1000 cleaning machine is designed to diagnose, wash, and dry DPF filters and catalytic converters of various designs, meeting EURO 5 and EURO 6 standards. The machine offers gentle and effective cleaning through a washing method that achieves excellent results without damaging the expensive filters. The stand operates based on hydro-impact and turbulent fluid movement, using special washing solutions and temperature regimes for effective cleaning. After cleaning, the filter's operating properties are restored by 97%. KEY FEATURES - Testing of the filter before washing to assess the degree of clogging and after washing to check the quality of the cleaning. - Automated washing cycle with the possibility of programming all operating modes. Filter cleaning is hydrodynamic, with hydraulic and pneumatic systems operating in specific modes to generate hydraulic impulses for the removal of contaminants. - Accelerated drying of the filter by means of a powerful hot air blower, which allows the complete removal of residual moisture from the product. >> This allows the entire cleaning cycle to be completed in a short time, >> and return to the customer a clean and dry filter ready to be fitted to the vehicle. Chjdpfspbv Hgjx Ab Sjc Perspective business with POSEIDON-1000 • The equipment and technology allow to perform high quality cleaning of DPF particulate filters of all types and brands of cars. • The most functional stand among foreign analogues, thanks to which it has high productivity. • Automated operation and control of the process of cleaning and drying the filter allows the stand to be operated by one person. • Minimal resources and time required to open your own service for cleaning particulate filters with our equipment. • Maximum quick payback of the equipment if you own a service for the repair of automotive units. YOUR BENEFITS + Automated process of DPF filter cleaning with the possibility of programming all the machine's operating modes, gives you the opportunity to independently adjust the washing mode to increase the efficiency of the processes or to work with the modes set by the manufacturer. + Full control of the filter cleaning and drying process is guaranteed by the presence in the standard programme of graphs displaying air or water pressure values in real time. + The filter condition diagnostic function with report printing allows the creation of reports before cleaning (to check the degree of contamination) and after cleaning (to check the quality of the operation performed). + The working surfaces and the body of the stand are not subject to corrosion as they are made of stainless steel sheet material. + The hermetic chamber not only limits the spillage of technical fluids, but also reduces the noise level to acceptable levels, making work on the stand more comfortable and safer. + Quick installation of the DPF filter is possible thanks to a separate pneumatic system for the connection of a universal quick-fit adapter. + The universal tool allows the installation of any DPF filter, regardless of the vehicle type. + Closed-loop fluid filtration is achieved with coarse and fine filters. The filters are equipped with pressure gauges that allow the degree of contamination to be determined. + Rationally selected water tank volume allows to provide short fluid warm-up time, long time between fluid changes. Please contact us to get the best offer!

Condition: used, functionality: fully functional, For sale is a sturdy storage rack for at least 10 masts. Dimensions: Length: 6100 mm Width: 1100 mm Height: 1600 mm Cjdpsxlk Dnefx Ab Sohc Space in the compartments: 500 mm

Condition: new, Workbench with sheet steel shelf and 10-year manufacturer's guarantee* Made in Germany - Beech multiplex board 750 x 700 x 40 mm, without back board - Base frame made of VK tube 40/40/2 mm - Sheet steel shelf 600 mm deep - Leg elements with plastic adjustment plugs - Surface load with evenly distributed load: 1000 kg - Standard workbench - 750 x 700 x 840 mm L x D x H - Ergo version - 750 x 700 x 900 mm L x D x H Available in 7 different basket colors: - Anthracite gray - Gentian blue - Fire red - Sky blue Chsdpfx Absubxxqj Ssc - Light blue - Light gray - Pure orange - Reseda green - Signal blue - Deep black * 10-year manufacturer's warranty. Wearing part excluded. This item is delivered free kerbside. Delivery time usually 5 working days. Free shipping within DE without islands.

Condition: new, Year of construction: 2024, functionality: fully functional, VSM3.0DRO A-M Valve seat milling machine - new machine. Cjdjvmpnlepfx Ab Sehc Digital display valve seat milling machine. High precision valve seat milling machine specifically designed for multi-valve cylinder heads. Machining capacity from 16 mm to 90 mm. Variable speed from 100 to 1200 RPM. Max. cylinder head width: 500/19,7 mm/inch Max. cylinder head height: 450/17,7 mm/inch Tilt degree of cylinder head: +42°- -42° Max. tilt degree of spindle: 5° Travel: -Cross: 930/37 mm/inch -Longitudinal: 40/1,6 mm/inch -Spindle: 200/8 mm/inch Spindle power: 1.8 kw Max. rotation speed of spindle: 0-1000 RPM Power supply: 380V/50Hz 3ph vagy 220V/60Hz 3ph Air compressor supply: 6/87 Bar/psi Noisy level: at 400 RPM 72dBA; at 1200 RPM 82dBA Weight: 1050/2310 kg/lb Dimension (L x W x H): 1040 mm x 1050 mm x 2170 mm

Condition: as good as new (ex-display), CMT–VSR Pro is an advanced high-speed core balancing machine including a manually operated, fixed-mount correction cutter that ensures a fine quality surface finish and a servo-controlled air valve to provide the highest measuring accuracy. Cjdpfsiihqwjx Ab Sshc The machine has been designed for the high-speed balancing of turbocharger core assembly of passenger car, light- and heavy-duty trucks. It is used for checking whether there is any unwanted dynamic phenomenon of a rotor at high rotational speed value e.g. the flexural of shaft by the moment of force. Balancing in a full range of rotational speed extends lifespan of turbocharger and eliminates the undesirable effect of whistling. Core is installed on the hub of the machine by the use of a mounting flange with the two clamps to lock it. Turbine wheel is driven by compressed air supplied through a drive sleeve with a nozzle system. During a measurement an oil with an appropriate temperature and pressure is supplied, as a result of which the balancing conditions are similar to those of a combustion engine. As a result, the vibration graph of a core in relation to a rotational speed value and a vibration norm is displayed. In addition, to simplify the analysis of the vibration graph, the software indicates the exact angular position of a mass correction

Condition: excellent (used), Telescopic drawer cabinet with 7 drawers 2 x 75 mm high 3 x 100 mm high 1 x 160 mm high 1 x 220 mm high Width 1015 mm Depth 810 mm Height 1045 mm with pallet 1200 mm Weight with pallet 270 kg Cedpfx Abjw Au Ale Sohc

Condition: new, Cardan shaft balancing machine BVI-03-74 Machine for driveshafts weighing up to 150kg and up to 4700mm long. Suitable for small workshops with a large range of different shafts, including trucks. This balancing machine has high productivity and serves to balance the cardan shafts of cars and trucks. It makes the process of balancing the cardan shaft easy thanks to many technical solutions, while the machine has an affordable price, which reduces your financial burden and allows you to develop your business effectively. . . TWO TIMES faster than your machine. This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . . HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. KEY FEATURES • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 4700mm, weight up to 150kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Soft-bearing type machine - high sensitivity to any vibration • Machine is operated by one worker • Sliding bearing supports - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 150 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 4700 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2000 rpm Power supply 380V, 3 Ph, 50Hz Power, minimum, 2,2 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 700 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Cjdpfspbv Tfsx Ab Sshc Please contact us to get the best offer!

Condition: new, range L-W-H 780x480x105 mm weight 79,5 kg 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism. Chodpfx Asu Imlheb Ssc Tool trolley is equipped with 196 pieces of tool parts: 3 pcs socket wrench sets: 1/4" from 4 - 14mm, 3/8" from 6 - 22mm and Torx from E10 - E20, 1/2" from 8 - 32mm. Various screwdriver sets. Extension for socket wrench sets, various Allen keys from 1 - 10mm, various files. Ratchet ring spanner set from 6 - 22mm, ring spanner set from 6 - 22mm. Pliers range.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, For sale is a used, fully functional Dynapack DAQ54 chassis dynamometer with direct wheel hub connection. The system was purchased in March 2019 and has completed approximately 300 test cycles since – always carefully maintained and in excellent condition. The test bench comprises four mobile measurement units that are mounted directly to the vehicle's wheel hubs (after removing the wheels). Operation and data evaluation are handled via the included control unit with original software. Technical specifications: Max. measurable power: 3,000 hp / 2,200 kW (up to 1,500 hp / 1,100 kW per axle) Supports front-, rear-, and all-wheel drive Stationary or mobile operation (entire unit fits in a van) System advantages: - Precise power measurement via direct force transfer – no slippage, no friction losses - Maximum safety: No risk of tire blowouts or vehicle movement - Flexible deployment: Quick reconfiguration and compact design, also ideal for mobile use - Perfectly suited for tuning, development, and performance diagnostics Chsdpfx Ajwuqwvsb Ssc Feel free to ask further questions. Inspection and testing are possible by arrangement.

Condition: excellent (used), For sale: crimping tool for AMP 656075-1 TE Connectivity connectors. Chedpfxew Svqns Ab Soc

Year of construction: 2024, condition: as good as new (ex-display), Rim Balancing Machine: - Automatic clamping of a wheel hub with a heavy duty pneumatic clamping chuck - Automatic brake and wheel positioning - Fast balancing cycle time - Made of well-known brands heavy duty components - Fast tool changeover time - Servomotor as a spindle drive motor Cedpfx Ajt Tuqbeb Sjhc

Year of construction: 1997, condition: excellent (used), Safety work table Make WIBO White type Jekt TCRJO 180/98 with gradation made of stainless steel working space : Depth 920 mm height 1200 mm Cjdpfx Aehk St Asb Sohc width 1800 mm working height 600 mm total dimensions : Depth 1080 mm height 2100 mm Height with suction 2550 mm width 1800 mm

Condition: new, 9D715US crankshaft balancing machine is adapted for balancing crankshafts of various designs, including crankshafts of V6, V8, V10 and V12 engines, with balancing weights on the connecting rod pins: - Balancing of crankshafts of any design - Shaft weight up to 300kg - Shaft length up to 1400mm - Drilling module for unbalance correction The machine design allows balancing crankshaft separately, as well as crankshaft complete with flywheel and clutch, which guarantees minimum unbalance during engine operation. MACHINE HIGHLIGHTS • Hard-bearing supports - safe operation with high initial unbalance at low speeds. • Roller cassettes with large diameter spherical rollers and provide the required accuracy for balancing heavy shafts. • Replaceable antifriction prismatic V-blocks allow balancing of crankshafts with low mass or with special bearing journals. • Narrow support stands of the machine allow balancing of crankshafts with complex configuration and with “narrow” bearing journals. The 9D715US machine has a cassette width of 27 mm, which is the best in its class. • For balancing V-shaped crankshafts, the machine can be equipped with counterweights (variable weight) to simulate the weight of connecting rods. • A vertical drilling module mounted on its own guides allows unbalance in the crankshaft counterweights to be corrected directly on the machine. • The frequency converter drive provides smooth acceleration and deceleration of the electric motor and infinitely variable speed control of the rotor. MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • Measuring balancing system has additional necessary functions for crankshaft balancing: - recalculates the unbalanced mass to the drilling depth, taking into account the drill diameter and the permissible drilling depth. - It recalculates the unbalance on several correction planes, so that unbalance can be corrected in neighboring crankshaft counterweights. SPECIFICATIONS Weight range of balanced rotors 3 - 300 kg Maximum rotor diameter (above the bedding) 1100 mm Diameter of rotor support journals 20 - 140 mm Distance between centres of rotor journals 150 – 1350 mm Chedpewk Ittefx Ab Sjc Support type Rollers / V-blocks Transmission element for rotor rotation Belt Minimum achievable residual specific unbalance 0.4 g.mm/kg Rotor speed range 300 – 1500 rpm Electric motor power 2.2 kW Parameters of the supply network 380V, 3 Ph, 50Hz VTM Group balancing machines will allow you to do your job well and get positive feedback and attract more customers. Do you need a machine for a different load capacity, diameter or length? We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Condition: new, range L-W-H 780 x 480 x 1050 mm weight 79,5 kg 6 St. The tool trolley is equipped with 6 storage drawers. The tool trolley is equipped with 2 normal and 2 swivel wheels, one of them with a brake. Csdpfx Abju Imk Ro Sohc The tool trolley is fully lockable thanks to an integrated lock. Drawers can be locked per drawer. All drawers are equipped with a quick release and a cushioning fitted. Height-adjustable storage compartment behind the door. Central locking with 2 keys. Tool trolley is equipped with 155 pieces of tool parts: 3 pcs. Socket sets: 1/4 ", 3/8", 1/2 ". Ratchet ring spanner set from 6 - 22mm, Extension for socket sets, different allen keys from 1 - 10mm, Various screwdriver sets. Pliers assortment.

Condition: excellent (used), For sale: a set of 3 professional AMP / TYCO Electronics handheld crimping tools for industrial, automotive, and workshop applications. Original tools with EDB Electronic service documentation – each dedicated to a specific range of wires and contacts. Codpfx Absw Svapj Sehc

Year of construction: 1996, condition: used, double-walled collection container for hazardous materials Chsdpfjb Ed S Rsx Ab Sec Capacity 200 litres see picture

Condition: new, ATP-1000 tester can be successfully used in companies engaged in turbocharger repair, as well as in car repair services offering a wide range of repair works to determine the cause of turbocharger malfunction. It is also suitable for companies supplying electronic actuators. The tester checks the functionality of the actuator as a whole and its individual elements such as the position sensor and servomotor. Separate diagnostics of each element allows you to accurately determine the condition of the turbocharger actuator and detect a problem, if one exists. The ATP-1000 is easy to use and allows you to quickly check the condition of the actuator and its components. This has made it an effective tool for monitoring the functionality of actuators. HIGHLIGHTS Testing of electronic actuators for turbochargers Programming (adaptation) of SIEMENS electronic actuators Testing of 12V DC motors up to 2A Testing of boost solenoids used in pneumatic systems Testing of electronic and pneumatic actuator position sensors Works with all common types of actuators and similar in principle of operation. Communication protocols: PWM, CAN, ADC, SENT. KEY FEATURES • Protection of the device by current 2A for 3 seconds • Automatic detection of DC motor polarity inside the actuator • Tooltip for color-coding the cable to the selected actuator type • Display position sensor readings as a percentage • Display of additional parameters of HELLA programmable actuators: firmware number, programmed angle value • Portable version for testing directly on the vehicle • USB control of actuators, when working together with the software of GEOMET-2000 turbo flowbenches. • Regular updating of the tester firmware СABLES Set of diagnostic cables for actuators 12 pcs. Set of diagnostic cables for position sensors 6 pcs. Cable set for uncommon turbines 11 pcs. USB cable 1 pc. Cable AC/DC 12V, 4A power supply 1 pc. Chjdpfx Aben E S T Uo Sec !!!! If you are looking for an electronic actuator programmer, ask me.

Condition: new, range L-W-H 780x480x105 mm weight 79,5 kg 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Drawers can be locked per compartment. Cedpfou Imhcjx Ab Sjhc All drawers equipped with quick lock and soft-closing mechanism. Tool trolley is equipped with 196 pieces of tool parts: 3 pcs socket wrench sets: 1/4" from 4 - 14mm, 3/8" from 6 - 22mm and Torx from E10 - E20, 1/2" from 8 - 32mm. Various screwdriver sets. Extension for socket wrench sets, various Allen keys from 1 - 10mm, various files. Ratchet ring spanner set from 6 - 22mm, ring spanner set from 6 - 22mm. Pliers range.

Condition: excellent (used), Professional Harting hand crimping tool – model , dedicated for HAN D contacts. Used in industrial automation, electrical engineering, and low-voltage installations. • Wire range: 0.14 – 2.5 mm² (AWG 30–13) • Suitable for crimping contacts: HAN D 0.5 mm² and 1.0 mm² • Crimping force: 60–108N, depending on conductor diameter • Contact part numbers: 73300-200 and 73300-201 • Ergonomic handles, precise operation • Markings on the head: 0.14 / 1.0 / 1.5 / 2.5 mm² • Genuine industrial tool – Made in Germany Condition: very good – fully functional, ready for immediate use. Chodpfjw Su Ncsx Ab Sjc