Used car workshop equipment for sale (60)

Condition: excellent (used), Professional workshop crane with counterweight and hydraulic drive. Very good condition, fully operational, ready for use. • Model: Hydrobull HB 500 GK • Manufacturer: E. Ziegler GmbH, Renningen (Germany) • Year of manufacture: 2004 • Lifting capacity: 500 kg • Lifting height: 280 cm • Jib length: 150 cm • Counterweight: 850 kg • Own weight: approx. 1200 kg (350 + 850 kg GG) • Outreach range: A1–A7 (240–500 kg, according to load chart) • Steel construction, mobile on industrial wheels • Hydraulic lifting and lowering of the jib • Technical and visual condition: very good Itsdsxmt H Iopfx Aitjf

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 3 kg, inner dimension height: 190 mm, total width: 450 mm, total height: 200 mm, total length: 470 mm, load capacity: 50 kg, empty load weight: 5 kg, Equipment: crane, For sale: used steel transport boxes (from racking system) in good condition. 10,000 pieces available, 120 pieces per pallet, preference for full truckload orders. Dimensions: 450 x 300 x 200 mm, hot-dip galvanized, perforated sides and bottom, handles on the sides. Itedpfx Aiov U Ubyjtsf

Condition: excellent (used), For sale: a set of 4 professional Tyco Electronics Premium CERTI-CRIMP crimping tools, used in the electronics industry, automation, and wiring harness service. The equipment comes with full documentation (eDB cards) – ready for operation, each crimping tool assigned to a specific connector type. Iedsw Slhispfx Aitetf

Condition: excellent (used), For sale: crimping tool for AMP 656075-1 TE Connectivity connectors. Iodjw Svqnspfx Aitotf

Condition: excellent (used), For sale: a set of 3 professional AMP / TYCO Electronics handheld crimping tools for industrial, automotive, and workshop applications. Original tools with EDB Electronic service documentation – each dedicated to a specific range of wires and contacts. Isdpfx Aijw Svapetjtf

Condition: excellent (used), Professional Harting hand crimping tool – model , dedicated for HAN D contacts. Used in industrial automation, electrical engineering, and low-voltage installations. • Wire range: 0.14 – 2.5 mm² (AWG 30–13) • Suitable for crimping contacts: HAN D 0.5 mm² and 1.0 mm² • Crimping force: 60–108N, depending on conductor diameter • Contact part numbers: 73300-200 and 73300-201 • Ergonomic handles, precise operation • Markings on the head: 0.14 / 1.0 / 1.5 / 2.5 mm² • Genuine industrial tool – Made in Germany Condition: very good – fully functional, ready for immediate use. Iedpfxsw Su Nce Aitstf

Condition: excellent (used), For sale: used Klauke K18 press. The professional ENERGOTYTAN KLAUKE K18 mechanical press is designed for the toughest electrical installation tasks. Its robust construction, suitable for both indoor and outdoor use, ensures reliable operation Itedpfow Slkdjx Aitsf

Condition: excellent (used), For sale: crimping tool for Molex 6982 connectors. Itedpfxjw Sliaj Aitsf

Condition: excellent (used), For sale: JST terminal crimping tools YRS-231, YRS-260, YRS-470, YRS-491. Crimping tools are in very good condition, price is per piece! Iodpjw Sg Ikjfx Aitotf

Condition: used, Writing desk, mobile desk, shelf trolley, logistics trolley, shelf trolley Transport trolleys, platform trolleys, workshop trolleys FETRA type 5834 Writing surface height: 1100 / 1190 mm Writing surface: 605 x 585 mm Shelves: 600 x 495 Load capacity per shelf: 50 kg Total load capacity: 100 kg - Rolling desk made of tubular steel and sectional steel - Screw construction, powder-coated, blue RAL 5007 - Writing surface on wooden board with stop bar, inclined approx. 10 - 2 shelves, can be screwed in variably (2 file heights possible) - 4 swivel castors (Ø 125 mm) with plastic rim and rubber coating on the running surface - 2 fixed castors with brakes Space requirement L x W x H: 600 x 600 x 1190 mm Weight: 25 kg Very good, as new condition Iedpfx Ajpflp Esitetf 8 pieces available, price per piece

Condition: excellent (used), Working lamp Itjdpfx Aioip Dbtjtof Make Waldmann type 008308 50 watt 24 volt height 250 mm width 130 mm Depth 130 mm

Year of construction: 1997, condition: excellent (used), Safety work table Make WIBO White type Jekt TCRJO 180/98 with gradation made of stainless steel Ijdpfx Aishk St Aotstf working space : Depth 920 mm height 1200 mm width 1800 mm working height 600 mm total dimensions : Depth 1080 mm height 2100 mm Height with suction 2550 mm width 1800 mm

Condition: new, GEOMET-2000 flow bench for calibrating a variable nozzle turbocharger without shaft rotation. This flow bench can calibrate the geometry of vacuum, air and electronically controlled turbochargers. The equipment is adapted to the needs of workshops for repairing turbochargers of trucks and cars. It is also designed to work with large-sized or non-standard turbocharger designs; Flowbench GEOMET-2000 will allow a regular workshop to provide professional turbine repair services, thus gaining more customers. HIGHLIGHTS Adjusting the end stop position of the air flow control mechanism (variable geometry) will eliminate the "overblowing" effect, which is detrimental to the engine. Iedpsn E N E Eofx Aitjtf Adjusting the length of the actuator rod to adjust the actuation timing of the air flow control mechanism. Evaluating the spring elasticity of the actuator for in-depth diagnostics of vacuum and pneumatic actuators. Checking the operation of the N75 valve for turbines with vacuum valve, which is involved in controlling the turbocharger on the vehicle. Tuning of electronically driven turbos is done by connecting to an external tester ATP-1000. Vertical position of the turbocharger and free working area - comfortable and efficient work with all types of turbochargers. KEY FEATURES • More than 6200 turbo references database • Creation of a test plan for a new turbine from the manufacturer. • All measurements are done in real time. • Calibration of the test bench before starting work • Automatic atmospheric pressure and temperature compensation • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Turbo Test software. • Creation and printing of reports on the tuning process. • Quick turbine installation thanks to magnetic adapters • Self-diagnostics SPECIFICATIONS Maximum productivity of the vacuum pump 180 m3 Required pressure in the pneumatic system 0,6 – 0,8 MPa Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1190 х 520 х 1730 mm Weight 255 kg

Year of construction: 2025, condition: new, GeoBoost-7000 Combined bench for turbocharger geometry calibration and performance evaluation. Stand for static and dynamic calibration and testing of turbocharger. It has a combined two-position design, which allows testing the turbocharger in two modes - rapid static calibration of turbocharger geometry - Full dynamic diagnostics at different operating modes GeoBoost-7000 will allow you to carry out professional testing of turbocharger operation during repair, tuning or modernization. The availability of two working zones of the machine depending on the testing method helps to carry out comprehensive diagnostics. HIGHLIGHTS • Simulates real-world operating conditions for accurate turbocharger diagnostics and tuning. • Flexible and versatile to work with a variety of turbocharger models. • All types of turbochargers can be installed using the accessories provided. • Oil leak testing using heated oil and compressed air. • N75 turbocharger control valve testing. KEY FEATURES - Ability to adjust the extreme position of the blades of the air flow control mechanism. - Adjusting the length of the stem to adjust the actuation torque of the air flow control mechanism. - Real-world turbocharger testing; - Real-time geometry tuning; - Performance testing of actuators: vacuum, pneumatic and electric types; - Diagnosis of servo-drives of electric actuators (optional); Iodjvtn Hmopfx Aitotf - Post-assembly testing of the turbocharger for oil leakage; - Availability of a high capacity vacuum pump to create the required vacuum and air flow. - Testing the turbine according to the manufacturer's test plan; - Calculate turbocharger performance; - Plot supercharger inlet and turbocharger outlet boost vs. flow; - Construct the resulting graph; - Generate and print test reports. SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1700 х 900 х 1500 mm Weight 400 kg

Condition: excellent (used), functionality: fully functional, Heavy-duty trailer Manufacturer: FETRA Type: 6787 Year of manufacture: 1999 Loading area: Width: 1250 mm Length: 2500 mm Loading height: 500 mm Weight: approx. 500 kg Isdpfxjygc R Rj Aitotf In very good condition.

Year of construction: 2020, condition: like new (used), WSL680 with perforated side panels As good as new, unused! Workshop trolley with one shelf and 2 drawers 400 kg load capacity, perforated metal side panels, 2 x fixed castors, 2 x swivel castors with brakes Dimensions: (WxHxD) approx. 702mm x 922mm x 922 (1002mm with handle) Fully assembled incl. Itjdpfeur Rxrex Aitsf 1 x drawer h= 60mm 1 x drawer h= 150mm 1 x shelf Structure powder-coated in the colors RAL 7035 (body) RAL 7021 (drawers)

Condition: excellent (used), 2x Hahn+Kolb tool cabinet on wheels with 6 drawers. The price is for one tool cabinet! Both together cost the corresponding 2400 € plus VAT. Used but almost like new. Minor signs of use on the worktop and otherwise fully functional with 2 keys each. Tool cabinet with 6 drawers L x W x H 1025x705x930 mm Drawers dimensions (inside) L x W x H : 1x 880x590x240mm 5x 880x590x65mm Itsdpfjnucgxsx Aitof The height is including the rollers ! Fully functional. Pickup and shipping (forwarding) possible

Condition: new, Cardan shaft balancing machine BVI-03-74 Available in stock in Poland !!! Delivery time: one day!!! . . Machine for driveshafts weighing up to 150kg and up to 4700mm long. Suitable for small workshops with a large range of different shafts, including trucks. This balancing machine has high productivity and serves to balance the cardan shafts of cars and trucks. It makes the process of balancing the cardan shaft easy thanks to many technical solutions, while the machine has an affordable price, which reduces your financial burden and allows you to develop your business effectively. . . TWO TIMES faster than your machine. This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . . HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. KEY FEATURES • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 4700mm, weight up to 150kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Soft-bearing type machine - high sensitivity to any vibration • Machine is operated by one worker • Sliding bearing supports - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 150 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 4700 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2000 rpm Power supply 380V, 3 Ph, 50Hz Power, minimum, 2,2 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 700 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer! Itsdpspbv Tfefx Aitjf

Condition: new, ATP-1000 tester can be successfully used in companies engaged in turbocharger repair, as well as in car repair services offering a wide range of repair works to determine the cause of turbocharger malfunction. It is also suitable for companies supplying electronic actuators. The tester checks the functionality of the actuator as a whole and its individual elements such as the position sensor and servomotor. Separate diagnostics of each element allows you to accurately determine the condition of the turbocharger actuator and detect a problem, if one exists. The ATP-1000 is easy to use and allows you to quickly check the condition of the actuator and its components. This has made it an effective tool for monitoring the functionality of actuators. HIGHLIGHTS Testing of electronic actuators for turbochargers Programming (adaptation) of SIEMENS electronic actuators Testing of 12V DC motors up to 2A Testing of boost solenoids used in pneumatic systems Testing of electronic and pneumatic actuator position sensors Works with all common types of actuators and similar in principle of operation. Communication protocols: PWM, CAN, ADC, SENT. KEY FEATURES • Protection of the device by current 2A for 3 seconds • Automatic detection of DC motor polarity inside the actuator Iodpfon E S T Uex Aitstf • Tooltip for color-coding the cable to the selected actuator type • Display position sensor readings as a percentage • Display of additional parameters of HELLA programmable actuators: firmware number, programmed angle value • Portable version for testing directly on the vehicle • USB control of actuators, when working together with the software of GEOMET-2000 turbo flowbenches. • Regular updating of the tester firmware СABLES Set of diagnostic cables for actuators 12 pcs. Set of diagnostic cables for position sensors 6 pcs. Cable set for uncommon turbines 11 pcs. USB cable 1 pc. Cable AC/DC 12V, 4A power supply 1 pc. !!!! If you are looking for an electronic actuator programmer, ask me.

Condition: new, TURBO-BOOST-TEST turbocharger boost testing bench allows for professional turbocharger calibration and performance evaluation. The test bench can be used in turbine tuning and refinement, in the manufacture of hybrid turbines, to test changes in turbine performance after tuning. Our test benches are advanced systems for turbocharger tuning and testing in dynamic mode. Its provide turbocharger testing under near realistic operating conditions, ensuring full process control and detection of any potential problems, including oil leaks. HIGHLIGHTS • Complete finish testing and tuning of automotive turbochargers for engines up to 3 liters • Dynamic turbocharger testing • Installation on the regular surfaces of fastening • Running in and check on an oil leak • Tuning of electronically driven turbos is done by connecting to an external tester ATP-3000 • Installation of turbochargers of any design KEY FEATURES • More than 2000 turbo references database • Calculate turbocharger performance; • Plot supercharging vs. inlet and outlet flow graph; • Generating the resulting graph; • Testing of actuator performance: vacuum, pneumatic and electric types; • Diagnosis of servo-drives of electric actuators (optional); • All measurements are done in real time. • Calibration of the test bench before starting work • N75 valve testing function • Built-in blower pump to create a constant airflow Itedpfx Aiettg S Ujtjf • Self-developed Boost Test software. • Creation and printing of reports on the tuning process. • Self-diagnostics SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1330 х 770 х 1440 mm Weight 265 kg

Condition: new, The POSEIDON-1000 cleaning machine is designed to diagnose, wash, and dry DPF filters and catalytic converters of various designs, meeting EURO 5 and EURO 6 standards. The machine offers gentle and effective cleaning through a washing method that achieves excellent results without damaging the expensive filters. The stand operates based on hydro-impact and turbulent fluid movement, using special washing solutions and temperature regimes for effective cleaning. After cleaning, the filter's operating properties are restored by 97%. KEY FEATURES - Testing of the filter before washing to assess the degree of clogging and after washing to check the quality of the cleaning. - Automated washing cycle with the possibility of programming all operating modes. Filter cleaning is hydrodynamic, with hydraulic and pneumatic systems operating in specific modes to generate hydraulic impulses for the removal of contaminants. - Accelerated drying of the filter by means of a powerful hot air blower, which allows the complete removal of residual moisture from the product. Isdpfopbv Hgsx Aitotf >> This allows the entire cleaning cycle to be completed in a short time, >> and return to the customer a clean and dry filter ready to be fitted to the vehicle. Perspective business with POSEIDON-1000 • The equipment and technology allow to perform high quality cleaning of DPF particulate filters of all types and brands of cars. • The most functional stand among foreign analogues, thanks to which it has high productivity. • Automated operation and control of the process of cleaning and drying the filter allows the stand to be operated by one person. • Minimal resources and time required to open your own service for cleaning particulate filters with our equipment. • Maximum quick payback of the equipment if you own a service for the repair of automotive units. YOUR BENEFITS + Automated process of DPF filter cleaning with the possibility of programming all the machine's operating modes, gives you the opportunity to independently adjust the washing mode to increase the efficiency of the processes or to work with the modes set by the manufacturer. + Full control of the filter cleaning and drying process is guaranteed by the presence in the standard programme of graphs displaying air or water pressure values in real time. + The filter condition diagnostic function with report printing allows the creation of reports before cleaning (to check the degree of contamination) and after cleaning (to check the quality of the operation performed). + The working surfaces and the body of the stand are not subject to corrosion as they are made of stainless steel sheet material. + The hermetic chamber not only limits the spillage of technical fluids, but also reduces the noise level to acceptable levels, making work on the stand more comfortable and safer. + Quick installation of the DPF filter is possible thanks to a separate pneumatic system for the connection of a universal quick-fit adapter. + The universal tool allows the installation of any DPF filter, regardless of the vehicle type. + Closed-loop fluid filtration is achieved with coarse and fine filters. The filters are equipped with pressure gauges that allow the degree of contamination to be determined. + Rationally selected water tank volume allows to provide short fluid warm-up time, long time between fluid changes. Please contact us to get the best offer!

Condition: new, MECHANICAL SCREW PRESS FOR STACKING U-JOINTS PRK-2 Designed for staking u-joints as well as assembly and dissasembly of driveshafts during repair and remanufacturing process Press can be used for the assembly and replacement of cardan joints in the repair and production of cardan shafts, as well as for other processes in which the pressing operation is used. This press is designed for use in a repair shop and does not require any special knowledge for operation and maintenance. Manual feed ensures precision and quality of stacking process. The pressing mechanism is based on a ball screw, which has a high efficiency and a long service life. Technological tooling for replacing stacked u-joints: • Centering housing for the punches. • Set of 8 bits for punching crosses with diameters from 20 to 31 mm for drive shafts. • Set of 4 bits for punching crosses with diameters from 15 to 19 mm for steering shafts. SPECIFICATIONS Ijdpepbwdljfx Aitetf Working area (L x B x H) 322х312х350 mm Maximum compression force 5500 kg Maximum force on rupture 2000 kg Dimensions (length x width x height) 402х488х1478 mm Weight 160 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Year of construction: 2001, condition: used, Technical details: lifting capacity: 0,15 t span width: x. 1200 mm arm length:: max. 1200 Lifting height: 2400 mm stroke speed: handgesteuert weight of the machine ca.: 0,42 t Isdpeu Nvixsfx Aitstf dimensions L x W x H: 2,2 x 0,75 x 1,65 m Engine hoist / engine crane Welded sectional steel Lifting movement via lifting beam pneumatic vertical movement (pneumatic pressure cylinder) via hand knob Load hook type SIKA 1, cable safety device movable, braked in vertical position of the drawbar, double wheel swivelling 90° right/left, front area 2x wheels fixed Accessories 2x various lifting straps and 1x chain length approx. 950mm *

Year of construction: 1996, condition: used, double-walled collection container for hazardous materials Capacity 200 litres see picture Itodpfx Asb Ed S Rsitjf

Condition: used, Filling station for oil, compressed air pump for fresh oil, remote oil equipment, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, oil centrifugal gear oil pump -Hand: operated -with: return to the tank -Number: 2x pumps available -Price: per piece -Dimensions: 580/590/H1005 mm Itjdpsdl E Icsfx Aitof -Weight: 70 kg/piece