Eccentric Press - Single Column

HENSEL EBU SK 50

Condition: used, Year of construction: 1968, pressure 050 t throat 250 mm stroke 8 - 120 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 420 mm table surface area 645 x 510 mm Giodsvzxriopfx Ah Hel hole in the table 250 x 180 mm table height over floor 700 - 930 mm table adjustable 230 mm ram surface 220 x 185 mm ram adjustment 70 mm power requirement 3,0 kW weight 3,0 t dimensions (WxDxH) 1,1 x 1,8 x 2,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, foot operation as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: good (used), Year of construction: 2018, Manufacturer: INDUCTAFLEX Type: AL-3e Control system: ACCURATE touch screen Year of construction: 2018 3 rolls driven servo Torq each roller 3500 nM Electrically support rolls Intelligent software : Ellipse program U Bend shapes control of tangents Auto section detector Specifications Metric US Standard Horizontal and Vertical Horizontal Axis Ø 105 mm Number of rollers 3 Stroke X axis Giedpfx Ahovd Dfts Hjl 0 - 400 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2700 mm weight 3300 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: ready for operation (used), Sertom brand calender, hydraulic, length 25000 mm with invitation, 2 lower rollers 300 mm, upper roller 318 mm, thickness 14 mm. 22 Kw rotation, 5.5 kw movements, 2.5 kw bunk. Overall dimensions: 600x190x210(h)cm Weight: 15,500 kg Gisdjnr Npyopfx Ah Hel

Condition: good (used), Year of construction: 1988, turning diameter over cross slide: 900 mm, spindle bore: 105 mm, turning diameter: 1,200 mm, turning length: 5,000 mm, total length: 8,000 mm, total width: 1,800 mm, total height: 1,550 mm, bed width: 650 mm, workpiece weight (max.): 10,500 kg, Motorized tailstock CE-Chuck cover protection Telescopic guide cover over guideways Steady rest  4 chuck 1000 mm diameter 3 chuck 500   mm diameter   2 Axis digital read out system DBC Turning Length: 5000mm Swing over bed Ø: 1150mm Swing over cross slide Ø:850mm Gjdswrxpbjpfx Ah Hjil Spindle bore: 105mm Bed width: 650mm Tailstock spindle Ø: 140Ø Stroke pinole: 300mm Spindle taper: 6Mk Speeds / ranges: 4,5 - 900Rpm Workpiece load: 8000 Length: 8000mm Width: 1800mm Height: 1550mm Weight: 13800kg

Condition: used, Year of construction: 1999, Technical details: x-travel: 3 500 mm y-travel: 2 200 mm z-travel: 1 200 mm c-axis: +/- 200° control: Heidenhain TNC 426 spindle rpm - counter clockwise:: max. 10000 Gjdpfx Ahou Nc Ems Hjil spindle rpm - clockwise:: max. 10000 distance between columns: 2 500 mm distance spindle /table: vertical: 1230 mm clamping surface area: Tisch: 3000 x 2000 mm table load: 10 t tool taper: HSK A 63 feed:: X/Y/Z: max. 20 m/min. compressed air: 8 bar total power requirement: ca. 100 kW weight of the machine ca.: 40 000 kg dimensions of machine: 18,0 x 6,0 x 5,8 m 5 axis Portal Milling Machine 5-axis portal milling machine Milling spindle: make Hauser type HS 256A-01 Uni, speed max. 10.000 rpm. direct drive Milling head: make Hamül, fork type, A-axis integrated = angle of rotation +/- 110°. Tool changer: Hamül make, rotary indexing table type with rotary table, for 32 tool positions chip conveyor: 2 pieces hinged belt conveyor make DGS with water tank, insertion length 8.500mm make BKW type DL 55V-2KK, capacity 2,41 l/min.; (combined for oil- water mixture for oil and spindle cooling) Cooling lubricant system: belt filter make DGS type SBF 150 Operation: via control panel type Heidenhain LE 426 X-, Y- and Z-axis with Heidenhain measuring rods. manual control unit HR 410 hydraulic counterbalance (Z-axis) Equipment: Enclosure (protective walls with viewing windows and protective doors) hydraulic system working area lighting *

Condition: used, functionality: fully functional, Year of construction: 1989, roller (top) diameter: 200 mm, side roll diameter: 150 mm, sheet thickness (max.): 6 mm, working length: 3,000 mm, Working length 3000 mm Bending capacity 6 mm Giodpfx Ahouzm Ayj Hel Bending capacity 4 mm Top roller diameter 200 mm Diameter of side rollers 150 mm Hydr. folding bearing

Condition: ready for operation (used), technical Details: Speed - 130m/min. , Year - 2006, run out table - 6 m Wire diameter range 4-12 mm Gedpfx Ajtndgpeh Hsil

Condition: used, Technical details: grinding length: 12000 mm grinding width: 2800 mm workpiece height: 2510 mm max. workpiece weight: 24.000 kg table surface area: 11990 x 2500 mm distance between columns: 2820 mm cross rail adjustment: 2510 mm table feed: 1 - 40 m/min total power requirement: 110 kW weight of the machine ca.: 151 t dimensions of the machine ca.: 32,5 x 9 x 6,73 m .....machine is in top condition for high precision work! with CNC SIEMENS 840 D 1 universal grinding head, 22 kW Giodowc A Snepfx Ah Hjl swivelling of the grinding spindle +/-110° grinding wheel dimension 700 x 130 mm vertical stroke 1000 mm with dressing unit 1 surface grinding head, 30 kW grinding wheel dimension 600 x 150 mm vertical stroke 230 mm with dressing unit coolant and filtering unit diverse grinding wheel flanges *

Condition: as good as new (ex-display), Year of construction: 2023, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz total power requirement 5.5 kW weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption Gisdpfsxabntsx Ah Hel - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Condition: used, Year of construction: 1995, turning diameter over bed slide: 500 mm, Universal lathe Make: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing over bed ø: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live center • Coolant pump Gsdswudhuopfx Ah Hjil • Machine lamp All information subject to change. A live demonstration under power is possible at any time in our showroom.