Plastcompactor system

HERBOLD HV 70/250

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor. Hedoxgtqmspfx Aamsh

Condition: new, functionality: fully functional, power: 367.75 kW (500.00 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 4,250 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, 🇬🇧Iveco T-Way 500 Equipment CIFA RY 1300 ADVANCE concrete mixer • Anti-wear protection for 25x8 mm propellers • Two manholes • Rolling rollers diam. 250 mm with balance support • Central reduction gear • Water tank, capacity 1200 | + 80 litre oil tank • W a t e r • Quick water connection on both sides • Concrete consistency detection pressure gauge • Double electro-hydraulic controls (one push-button panel in the truck cabin and one rear, removable, with 3 m of cable) • Two additional chute sections, with fixing supports on the subframe • Four-start, edged propellers at the unloading point • Wear-resistant plates on the loading hopper and unloading chute • Unit completely sandblasted and protected with anti-rust primer • Water pump and chute lifting cylinder, hydraulically operated by the distributor • Heat exchanger • Approved folding rear underrun protection bar • Emergency Start/Stop buttons for the vehicle engine Optional • No. 2 additional chute sections > EKOS CAP - POSSIBILITY OF CUSTOM FINANCING OR LEASING ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS 0 DOWN PAYMENT TEL. -0823 1686306 Hedpfxev Apf Nj Aamjh -335 6713062 -377 7064530 OFFICE OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 SATURDAY 08:30/14:00 WE OFFER A WIDE CHOICE OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES (FIAT-HYUNDAI-DAF-MERCEDES BENZ-RENAULT-PEUGEOT-IVECO-MITSUBISHI-SCANIA sway S-WAY -5500-V8-650-580-730-s500-S 500-S500Stralis-MAN-NISSAN v8-Intarder- 770s-limited edition-660 S semi-trailer-refrigerated semi-trailer - Lamberet-schmitz ISUZU-FIXED BODY-CRANE-TIPPING-TARPAD-BOX-TAIL LOADER-COLD BOX-INSULATED WITH FRIDGE - VAN

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass Hodpfxoua D Als Aameh removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, Compact Shredder typ PYTHON-XL 1600, with 15 KW electricmotor, 400V 50Hz• • Electric motorreductor 15KW, 400V, 3phs, 50Hz 40% MORE torque compare PYTHON 1600 Standard • Opening 1600 x 1000 mm • Main dimensions L 2700 x B 1400 x H 2600mm • Discharge opening 400x 100mm • Height discharge opening ca 1000mm • Electrical control box with INVERTER, main switch, selector switch on / off switch and emergency stop Hsdpfx Asf N Nlgjamjh • Easily moved either with forklift or by means of lifting eyes • Weight approx. 2700 kg • Comprehensive machine manual • Finishing in RAL 3002 and RAL 7022 • (Subject to technical changes) • CE certified and "Made in Holland"

Condition: new, Year of construction: 2024, functionality: fully functional, COMPLETE PLASTIC GRANULATION LINES We offer technologically advanced complete plastic granulation lines designed to meet customer needs. Koltex PRS is a Polish manufacturer of high quality machinery and equipment for the various stages of waste recycling: PP,PE,LDPE,LLDPE,PS,ABS,HDPE. We provide comprehensive solutions and support for machine configuration. The innovative technologies of our recycling systems guarantee the highest degree of user-friendliness and equipment efficiency. We offer all the machines needed to configure a complete plastic recycling line. The XR 8 granulation line is the latest model from Koltex Plastic Recycling Systems in the field of LDPE film processing. In addition to the well-known technological solutions used in standard extruders, a number of changes have been made to achieve high production rates while improving the quality of the regranulate achieved. The new system is characterized by low energy consumption and significantly simplified operation thanks to the new SMART software. Hsdpouqmavefx Aameh Numerous modifications have reduced the machine footprint by 30% compared to the previous model, but also increased productivity by 45% while reducing energy requirements by around 15%. An intelligent temperature control system for the plastic in the Agglomerator and an automatic material dosing system ensure process stability. Thanks to the automation of the process, operator involvement has been reduced to a minimum. Our offer also includes: Complete systems for plastics recycling Mills Plastification systems, vibrating screens, centrifuges Screen changers Peripheral equipment Washing lines (DWFS®) Dynamic washing machines Drying separators Granulation and extrusion lines Service and spare parts You can find out more about our range of products in this area at our website

Condition: good (used), Complete AMMANN asphalt mixing plant. The ERMIIS automation was installed in 2013, replacing the original AMMANN automation. Capacity: 160 tons/hour. The plant is operational until January 2026. Hedpfx Aasxqpvtemoh

Condition: used, functionality: fully functional, Year of construction: 2009, machine/vehicle number: 1017, Used production line for blocks of concrete (and expanded clay). The line was used to produce concrete blocks using expanded clay. From 2023-08, the line is no longer in operation, it has been preserved. Line of blocks in order: - 2 pcs. small silos (with vibro, with pneumo flaps). - Raw material supply conveyor to the weighing hopper. - Weighing hopper. - Raw material supply conveyor from the weighing hopper to the mixer. - Mixer FK Machinery (Poland, 2022, bucket capacity 1200 l, engine power 18.5 kW). - Conveyor for feeding the mixture from the mixer to the SIGMA 1000 vibro press. - Vibro press SIGMA 1000: Type mark: PIERRE ET BERTRAND SIGMA 1000 with automatic TELEMECANIQUE control Manufacturer: ADLER S.A.S. Route de la Bourde, 60360 CREVECOEUR LE GRAND, France Serial no./year of manufacture/year of renovation - 1017/1989/2009 Area on the board (palette): 1130 mm x 550 mm (long x wide) Height of products - max 250 mm - Production shelf. - From the production shelf, the production is transported by autoloader to the mechanism where the production is automatically reloaded from the production boards onto the pallets. Production boards are automatically returned to the vibro press. Hodpouc Tzvjfx Aamjh - Control board with programmer. - Electric switchboard. 2022 year of production Mold 200 x 185 x 490 with which we have been working for the last year. There are many other used Moulds. There are about 500 pieces production boards. There is no compressed air compressor. We can provide disassembly, assembly and equipment startup services.

Condition: reconditioned (used), Year of construction: 2005, Allgaier Screening Machine | Gyratory Screen Type type ARSM 33-10 completely reconditioned Hedeq Iivaspfx Aameh - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: completely reconditioned - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts free selectable - Design of outlets according to customer requirements Screening machine completely refubished (overhauled). Spherical roller bearings and spring struts are new. Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 35810210841958, mileage: 1,09,000 km, power: 96 kW (130.52 HP), first registration: 01/1972, fuel type: diesel, empty load weight: 5,330 kg, maximum load weight: 9,500 kg, axle configuration: 4x4, fuel: diesel, color: blue, emission class: euro2, loading space volume: 20 m³, loading space length: 5,000 mm, loading space width: 2,200 mm, loading space height: 1,800 mm, Year of construction: 1972, Equipment: compressor, tail-lift, Mercedes-Benz LA 1113 B Essentials • Build: 01/1972 • Fuel type: Diesel • Mileage: 109.000 km • Engine power: 96 kW (130 PS) • Transmission: Manual gearbox Outfit • Color: Blue Your benefits • B2B Motors, your reliable trading partner Full specs • Auxiliary heating • Compressor • Retarder/Intarder Pricing info €18.500 Grand total price. VAT not reclaimable. Opening Hours: Mo - Fr : 08.30 - 18.00 | Sat : on request Hjdpfxotu Hqvs Aamoh Languages: English | Spanish | French | Dutch | German | Russian Viewing is only possible by appointment Subject to errors and prior sale All statements without guarantee.

Condition: ready for operation (used), functionality: fully functional, power: 78 kW (106.05 HP), fuel type: diesel, Year of construction: 1992, operating hours: 10,027 h, Equipment: cabin, Tire size: 10.00-20 Lifting speed: 66 m/min Operating weight: 22000 kg Load hook: 20000 kg Boom design: upper section 3500 mm / lower section 3500 mm / intermediate section / 3000 mm / intermediate section 1500 mm Basic equipment: with 4-point sliding beam support Engine manufacturer / type / power: Deutz / F6L 912 / 78 kW Max. Load capacity: 25000 kg Hjdpfxorvgyxo Aameh Extension length: 11500 mm