Wheel excavator

Hitachi ZX 145 W-6

Condition: used, Year of construction: 2019, operating hours: 7,606 h, 2019 | Hitachi ZX145W-6 | Used Wheeled Excavator | 7606 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 89600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 48 inspection points 48 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Very good general condition of the excavator. Only the deformation of the blade cylinder protective casing needs to be reported. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40214 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Guodpfxsyab Ste Albjc 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 7,010 h, power: 198 kW (269.20 HP), motor manufacturer: John Deere, gearing type: automatic, fuel type: diesel, maximum speed: 40 km/h, first registration: 02/2019, color: original, overall weight: 16,000 kg, front tire size: 610/70R30, rear tire size: 710/70R42, total height: 3,800 mm, total width: 3,000 mm, number of previous owners: 1, Equipment: additional headlights, air conditioning, cabin, compressed air brake, cruise control, differential lock, fridge, front linkage, front power take-off, hydraulics, lighting, non-smoking vehicle, rear power take-off, seat heater, trailer coupling, We are selling our John Deere 7270 R tractor. The machine has been very well maintained and is in perfect technical condition. Features: - Ultimate Edition - AutoPowr transmission 40 km/h, stepless - 10-inch Command Center display with video function - StarFire receiver - AutoTrac - JD Link Guedpfxsyx Araj Alboc - Command Center 4600 processor - CommandView III cab with premium equipment - Premium radio package - Premium lighting package - Leather comfort package with heated seat - Refrigerator - Electrically adjustable exterior mirrors - AutoPowr with left-hand reverser - Hydraulic pump 223 l/min - 5 double-acting super deluxe spool valves - Rear PTO 540E/1000/1000E - Rear linkage 7,847 kg, Cat III - 3-in-1 drawbar with automatic hitch and K80 ball coupling - Load Sensing - Front linkage with front PTO 1000 rpm - TLS Plus front axle with all-wheel drive - Adjustable rear axle 120 mm - Immobilizer with coded keys - Electric multifunction joystick - Rear wheel weights, cast rims The turbocharger was replaced in October 2025.

Condition: used, Pillar drilling machines Gsdpfeb N Ezrex Albjuc

Condition: excellent (used), lifting height: 17,300 mm, Year of construction: 2022, operating hours: 434 h, General information Field of application: Construction Weights Empty weight: 2.820 kg Functional Lifting capacity: 3.200 kg CE mark: yes Gusdsym T Nwopfx Albjc Condition Technical condition: very good Visual appearance: very good Other information Maximum lifting capacity at end of jib: 300 kg Delivery terms: EXW Transport dimensions (LxWxH): 3,505x0,77x1,96 Production country: IT Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Jekko SPX 532 CDH-3B * 2022 * Diesel and 400V * 434 working hours * 17.3 meter hook height * 14.8 meter horizontal reach * 3200 kg lifting capacity * Remote control * Outrigger * Jib 1000.2HL.1MX * Jib 1200GX * Total weight 2820 kg * Includes documents

Condition: good (used), Year of construction: 2005, Excavator CASE WX125 no. HHCWX125N5LB00688 Year: 2005 86 kW 9786 hours Godpsx Atlisfx Albeuc one bucket weight: 13 t No documents

Condition: used, power: 102 kW (138.68 HP), fuel type: diesel, Year of construction: 2019, operating hours: 3,035 h, Drive: Wheel Empty weight: 15.050 kg Gusdpfxsxgz Uts Alboc Serial number: N016 Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: good (used), Code: 0322 Brand: SCM Model: L'INVINCIBILE SI 3 - CE Standard Electronic panel saw with controlled axis, tilting blade and scoring unit, for furniture, panels, custom-made furnishings, doors, wooden window frames, kitchens, bathroom furniture, plastics, composite materials and various - CE Standard - Year 2017 Technical data: Carriage made entirely of aluminium with contact sliding system on hardened and ground steel guides Electronic control EASY TOUCH 12: 12-inch flat colour screen - Direct management of the following working axis using manual, manual incremental, semi-automatic and automatic methods: main blade lifting, blade unit tilting, parallel guide movement, scoring blade lifting and translation. Operator assistance with graphics support. Tool database Operator assistance function on electronic control Adjustable wall-mounted control panel Scoring unit with independent motorisation Squaring carriage length 3800 mm Main blade diameter 400 mm Scoring blade diameter 120 mm Blade tilt 0-45 degrees Max cutting height at 90 degrees 140 mm Max cutting height at 45 degrees 97 mm Blade rotation speed rpm 3000/4000/5000 Gsdpfxjytufgj Albjuc Scoring rotation speed rpm 8500 Main blade motor power Hp 9,5 Scoring blade motor power Hp 1,7 Cutting width at parallel guide 1500 mm Parallel guide programmed with THK sliding Electronic adjustment of the scoring unit Squaring frame with ‘COMPEX’ device for angled cuts with automatic compensation of the stop position. Start/stop buttons integrated into the carriage Eccentric workpiece clamping arm Extension to the work surface Squaring guide with 3 LCD readers for stop positions Full support and Wireless: adjustable frame for angled cuts complete with wireless function Suction mouth diameter: at the base 120 mm - at the suspended guard 100 mm Overall dimensions of assembled machine mm 4200 x 4300 x 1800 h Overall dimensions for transport mm 4200 x 2350 x 1800 h + Pallet mm 1600 x 1000 x 800 h Weight kg 1140

Condition: used, Year of construction: 2010, operating hours: 9,153 h, Manufacturer: Hitachi Type: ZX 190W-3 Year of manufacture: 2010 Hours: 9153 Weight: 20300 kg Engine: Isuzu AI 4 HK 1X Power: 120 kW Tires: 10.00-20 Outrigger: Blade support Equipment: SWE Bucket Central lubrication system Fuel pump Rock guard Air conditioning Rearview camera Radio Ready for immediate use. Gjdpfowliq Asx Albjuc Subject to errors and prior sale.

Condition: used, Year of construction: 2018, operating hours: 7,650 h, Equipment: ABS, all wheel drive, Liebherr 918 Compact Excavator Type: A 918 Compact Litronic Year: 2018 Operating hours: 7,650 h Engine: 115 kW Color: Yellow Equipment: - Air conditioning - Rear view camera - Side camera - Radio-CD-USB We are also happy to assist you with financing or leasing options through our partners. All information is provided without guarantee. Errors and prior sale excepted. Guodpey A Afnjfx Albec

Condition: used, Year of construction: 2005, functionality: fully functional, length stop: 3,200 mm, tool diameter: 400 mm, spindle diameter: 50 mm, spindle stroke: 640 mm, spindle speed (max.): 3,000 rpm, milling spindle length: 320 mm, saw blade diameter: 400 mm, height adjustment type: electric, type of input current: AC, working height: 130 mm, working width: 200 mm, SCM Windor 60/100 – Angle Processing Center Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System The system in question is a window and door production line of the type Windor 60/100 from the manufacturer SCM Group, built in 2005. It is a CNC-controlled angle processing center designed for the industrial machining of frame and sash components. The system is configured for series production and enables precise, repeatable machining in integrated process steps. 2. Main Components of the System 2.1 SCM Windor 60/100 Angle Processing Center The SCM Windor 60/100 features a modular design and is configured as an angle processing unit. Machining takes place on a tenoning side and a profiling side positioned at right angles to each other. The system combines several machining steps – such as milling, drilling, grooving, rebating, and tenoning – in a fully integrated, CNC-controlled process. Key Features: Godjx Nqqxjpfx Albeuc * CNC multi-sided machining * Multiple milling and processing spindles * Automated tool handling and changeover * High dimensional accuracy and repeatability 2.2 Fleximat Drilling Center The Fleximat drilling center is integrated into the system and is used for the precise execution of boreholes for joints and fittings. Machining is CNC-controlled with both vertical and horizontal drilling units. 2.3 Profiler Center The profiler center is designed for contour-forming milling operations and consists of two processing sides: Right side: * Lifting spindle with height adjustment * Suitable for variable profile and contour processing Left side: * 24-position tool changer * Automatic tool changing to minimize setup times * Suitable for complex profile milling 2.4 Löwer Surface Sanding Machine A surface sanding machine from Löwer is integrated into the production line. The machine is used exclusively for surface sanding, serving to improve the surface quality of the processed workpieces. 3. Control, Operation, and Safety The system is equipped with a CNC control unit that manages all machining operations, tool changes, as well as feed and spindle movements. Operation is semi- or fully-automated by trained personnel. The safety features are state-of-the-art as of the time of construction (2005) and include, in particular: * Mechanical guards and enclosures * Emergency stop devices * Safety locks on moving machine parts 4. Optional Expansion: SCM Topset XL Planer (10-spindle) For expansion of the existing machinery, provision has been made for a SCM Topset XL planer with 10 spindles. This machine will be operated as a standalone processing station at a separate location within the production hall and is not directly integrated into the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transportation are to be organized by the buyer. Available from 07.01.2026