Document finishing system

Hohner HSB 8000

Condition: excellent (used), Year of construction: 2007, 8 gathering stations + cover station stitching unit with 2 stitching heads three knife trimmer incl. outfeed belt cover feeder pressure vacuum pump stitching control thickness control Kjdev Hfbnepfx Aanefa

Condition: used, mileage: 64,129 km, power: 120 kW (163.15 HP), first registration: 02/2017, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 10/2025, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 7,850 mm, total width: 2,130 mm, total height: 2,300 mm, loading space length: 4,980 mm, loading space width: 2,100 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Complete rig with high-quality Fitzel body on Sprinter and trailer. Equipment: * Air conditioning, heated driver's suspension seat, * Double passenger seat, * 7G-Tronic Plus automatic transmission with cruise control, * Tow bar (3,500 kg) with 13-pin trailer socket, * Fuel tank: main tank 100 L, * Rear wall paneling, * Thermal insulation glazing, * Double passenger seat, Technology/Electrics/Comfort: * Becker MAP Pilot navigation system, * Outside temperature display, * Roof control unit with reading lights for driver and passenger, * Preparation for digital tachograph, * Electrically adjustable and heated mirrors (both sides), * Additional (reinforced) battery, * Isolation relay for additional battery, Safety/Environment: * Bi-xenon headlights with cornering lights, * Driver's airbag, * Brake assist, * Braking system with ABS + ASR, * Hill start assist, * Chassis for application B: reinforced front and rear stabilizers, reinforced shock absorbers, reinforced front axle, * Low emissions according to Euro 6 standard, Miscellaneous: * Wheelbase: 4,325 mm, * Engine: 2.1 L - 120 kW CDI CAT, * Payload: 1,460 kg according to registration certificate, * Gross vehicle weight: 3.50 t Including matching Fitzel 3-axle vehicle transporter trailer, Fitzel 35-23/83T, * Loading area: 8,280 mm x 2,300 mm, * Loading height approx. 680 mm, * Overrun brake, * Certified for 100 km/h, * Loading ramps, * Knott axles, * Tire size: 195/55R10C, * Payload: 2,610 kg, * Gross weight: 3,500 kg Since 1972, your reliable partner for all things automotive and commercial vehicles in 28832 Achim am Bremer Kreuz. NutzfahrzeugZentrum Behnke always stocks around 200 vehicles from vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special low rates. If you are interested, we are happy to prepare an individual offer! We welcome your trade-in of commercial vehicles/construction equipment. If a new TÜV inspection is needed, we gladly provide a quote from our partner workshops. Our offer generally does NOT include new TÜV inspection. Kfodsqu Hztspfx Aanea Delivery of your 'new' commercial vehicle by our external partners is possible for an additional fee. The information contained in advertisements, on the internet, price tags and images are non-binding descriptions and do not represent guaranteed features. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment may need to be verified separately. Subject to errors and prior sale.

Condition: excellent (used), Grinding length 1000 mm grinding diameter fi 350 mm Kfjdpfx Aaek Abxxensa In very good condition.

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 100810261, type of cooling: water, SHINOHARA 75 VP AMBIDEXTROUS (1+4 COLORS) CIP3. AUTOMATIC CHINCH PASS AUTOMATIC WASHING. UV LAMPS. Kedpfx Aastvmq Nenofa WATER COOLER WITH AUTOMATIC ALCOHOL MIXING PH. AUTOMATIC METERS. WASHING ROLLER WINDER DISTRIBUTED WITH THE MACHINE. FLOOR FAN. 2 CALIBRATION DEVICES 20 SPARE CYLINDERS. PRINTING 4600000

Year of construction: 2002, condition: good (used), Built in: 2002 Working hours: 10.688 thsd.h Size: max 365 x 305 mm min 105 x 115 mm Product thickness: max 15 mm min 6 mm Speed: max 9.000 c/h min 2.000 c/h Equipment: gathering chain & feeder • 10 station gathering track & chain • 10 automatic feeders • 1 cover folder feeder 1528 stitching unit • wire unwind device Kedpfx Aod R Saneanofa • stitch control • 2 stitching heads HK 75 three knife trimmer • three knife trimmer 1522 knives • 2 sets of knives

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data Kfodpfx Aaouf Sy Aenea - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Condition: excellent (used), Year of construction: 2007, Ref: 100048 Manufacturer: Adast Year of Manufacturing: 2007 Availability: Immediately -Minimum paper format: 105x148 mm -Maximum paper format: 381x520 mm -Paper/cardboard weight: from 30 to 350 gr./m² -Maximum paper thickness: 0.4 mm Kedpfx Aasrcbhlsnsfa -Maximum printing speed: 12,000 prints per hour -Alcohol Dampening -ADACONTROL for register management (axial, radial and diagonal registry - cooking and coloring -CIP 3 -Touch screen control screen 17" on display -Automatic washing of the coloring rollers -Automatic central lubrication of the machine -"GRAFIX" dusting machine -"Super blue" cylinder on display

Year of construction: 1996, condition: ready for operation (used), Built in: 1996 Size max: 480 x 320 mm Size trimmed: 480 x 320 mm min 153 x 108 mm Size trimmed: max 475 x 300 mm min 148 x 105 mm Product thickness: max 13 mm Speed: max 13.000 c/h Number of heads: max 6 Equipment: gathering chain & feeder three knife trimmer Kfjdpfx Aaod N D Ntjnsa

Condition: ready for operation (used), DANOBAT RTM 2500 – CNC Surface grinding machine | 2.500 mm Travel | 3.100 kg Table load High-capacity surface grinder designed for precision flat machining of large workpieces. Robust, accurate, and ready for demanding production environments. 🛠 Key technical features: • Max. grinding length: 2,500 mm • Max. grinding width (with 100 mm wheel): 900 mm • Max. grinding height (with Ø500 mm wheel): 1,000 mm • Table surface area: 2,500 x 800 mm • Max. table load: 3,100 kg • Electromagnetic chuck: 2,000 x 550 mm • X-axis travel: 2,650 mm at 1–30 m/min • Z-axis travel (cross): 800 mm • Y-axis travel (vertical): 1,150 mm • Z feed speed: up to 8,000 mm/min • Y feed speed: up to 1,000 mm/min • Positioning resolution: 0.001 mm • Encoder measurement on Z and Y axes ⚙️ Grinding head details: • Wheel diameter: 500 mm • Bore diameter: 203.2 mm • Max. wheel width with recess: 100 mm • Peripheral speed: 26 m/s • Nominal speed: 1,000 rpm • Grinding motor power: 15 kW • Total installed power: 30 kW ✅ Additional features: • Prismatic guideways with Turcite coating • Angular grinding head Kfodpfxjhq Ui Ie Aansa • Paper band filtration system • Hydraulic unit power: 4 kW 📌 Perfect for high-precision large-part surface grinding. A solid solution for manufacturers who require size, stability, and sub-micron accuracy.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Kjdpfx Aajmhhf Sjnjfa - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.