Scissor Lift

Holland Lift N195-12EL Combistar (19.5 m)

Condition: used, Year of construction: 2014, operating hours: 1,197 h, 2014 | Holland-Lift N195-12EL Combistar (19.5 m) | Used Scissor Lift | 1197 hours 📍Location: Estonia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 22500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 31 inspection points 31 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Given the age of the machine, all components and functions are operating as expected, with no major issues or abnormalities observed during the inspection. 📄 Want to see the full inspection, extra photos, or a video? Iaedpfoyaikwox Apmsw Tip: The reference "38107 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Isdjdrtaljpfx Apmoaw Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: good (used), functionality: fully functional, Year of construction: 2018, load capacity: 15,000 kg, ABUS 15-Ton Double Girder Overhead Crane – Including 120m Rails – Year 2018 / Installed 2021 For sale: a very well-maintained ABUS double girder overhead crane system with a lifting capacity of 15 tons, including approximately 120 meters of runway rails. The crane was installed in our injection molding facility in Leipheim, Germany, and has seen only limited operational use. It was primarily used for handling and changing molds in plastics injection molding production. Due to the closure of the factory, the complete crane installation is now available for sale. Iedpfxey Uk Dis Apmeaw Technical Specifications Brand: ABUS Type: ABUS ZLK Double Girder Overhead Crane Lifting capacity: 15 tons Span width: 19,944 mm Year of manufacture: 2018 Installed / commissioned: 2021 Crane classification: H2/B3 Power supply: 400V / 230V – 50 Hz Travel speed: 10 / 40 m/min Protection class: IP55 Total connected load: 18 kW Includes: Overhead crane Hoist Approx. 120 meters of rails/runway system Features - Double girder, heavy-duty industrial design - Very good technical and cosmetic condition - Low operating hours Important Information - Installed in our factory in Leipheim, Germany - Used only for mold handling in injection molding production - Factory closure sale - Disassembly and removal must be arranged by the buyer (assistance from a local team can be provided) - Inspection possible by appointment - Available immediately An excellent opportunity for production facilities, mold shops, heavy industry, or warehouse operations looking for a modern, heavy-duty crane installation in excellent condition.

Condition: used, type of input current: AC, protection type (IP code): IP22, power: 132 kW (179.47 HP), Equipment: type plate available, Exact type designation: ABB ACS607-0170-3 Output power and output current: 132kW | 260A Iodpfx Asrakqmjpmeaw ° With TEST SEAL! ° Easy to use thanks to the integrated control panel ° Original operating instructions for commissioning included Only 1 more in stock! Item has been reset to factory settings and is therefore in the original delivery condition from the manufacturer. Please refer to the original product images for the optical condition. Functional and ready to use.

Year of construction: 2009, condition: used, machine/vehicle number: 0301-260004, Kaltenbach KBS 1010 DG - KDX-S 1015 PROFILE STEEL SAWING AND DRILLING MACHINE The Kaltenbach KBS 1010 DG - KDX-S 1015 sawing and drilling combination consists of a CNC-controlled Kaltenbach KBS 1010 DG band saw and a Kaltenbach KDX-S 1015 drilling unit. This sawing and drilling system is ideally suited for the cost-effective sawing, drilling, center punching, marking (scribing), and thread cutting of profiles and flat steel bars in the steel construction and steel trading industries. The Kaltenbach KDX-S drilling system is equipped with 3 drilling units, each with 26 kW of drive power and a 5-position tool changer. The Kaltenbach M150 length measuring device (measuring carriage), together with the T13 transport system, is designed for profile lengths up to 18 m. The comprehensive transport system for handling structural steel also features cross conveyors at the infeed and outfeed for the transverse transport of the sections. The CNC control system, together with the Kaltenbach Profiline III software, enables data processing in DSTV and DXF formats. The entire system has an ergonomic working height of 640 mm from the material level to the top edge of the floor, providing the operator with a clear view. The removal and ejection of the initial cut or the onward transport of the profile to the discharge area is performed by a gripper located after the saw. The Kaltenbach KBS 1010 DG – KDX-S 1015 sawing and drilling system combination consists of: STEEL PROFILE DRILLING SYSTEM Kaltenbach KDX-S 1015 MITER BAND SAW Kaltenbach KBS 1010 DG MACHINE CONTROL Kaltenbach Profiline III LENGTH MEASURING DEVICE Kaltenbach M 150 TRANSPORT SYSTEM Kaltenbach T13 Isdpfx Aeymy Imspmjaw

Condition: good (used), Centrifugal fan, Fan, 75 kW Fan, Used machine Ijdpfxjua Eu No Apmjaw Overall dimensions : 2030 x 1750 x 1490 mm Air flow rate : 50 760 m3/h

Condition: used, Year of construction: 1999, functionality: fully functional, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of Manufacture: 1999 General Information: Manufacturer: Kaltenbach Machine Type: Automatic saw and drilling line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drill Line: KALTENBACH APS 1003 Year of Manufacture: 1999 Condition: Used, fully functional Location: Germany Availability: Dismantling possible from mid/end of March 2026 Inspection: The system is operational and can be inspected under power Sale: Without guarantee or warranty Machine Description: For sale is a complete Kaltenbach saw and drilling system for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC as well as a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross transfer conveyors. The system is currently in operation and has been reliably used in steel construction until now. It is ideally suited for efficient processing of beams and profiles in both series and project work. Typical Areas of Application: - Steel construction / hall construction - Metalworking - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-part manufacturing Technical Data: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre cutting: swivelable on both sides +45° / –45° - CNC-controlled length positioning - Automatic sawing mode Drill Line APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drill portal - Suitable for web and flange machining Roller Conveyors & Material Handling: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross transfer conveyor: approx. 4,000 mm - Outfeed cross transfer conveyor: approx. 4,000 mm Condition: - System is complete and fully functional - Currently in operation - Age and usage-related signs of wear - Sale as is - No guarantee or warranty Scope of Delivery: - Bandsaw KBS 851 DGNC - Drill line APS 1003 - Infeed and outfeed roller conveyors - Cross transfer conveyors (infeed and outfeed) - Control cabinet / operating unit - Existing safety devices - Documentation where available Dismantling & Loading: - Dismantling to be carried out by the buyer - Dismantling possible from the end of March 2026 Iaedpfx Apoyak Anomew - On site available: * Forklift truck * 2 gantry cranes each with 5 t lifting capacity - Good site access and loading conditions

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: K1232, overall weight: 5,100 kg, load capacity: 15,000 kg, High-quality double-girder bridge crane by STOCKER with a load capacity of 15,000 kg (15 t). Heavy-duty design featuring two massive box girders, an electric trolley (top-running trolley) with wire rope hoist, and a twin hoist system (yellow load hook visible). Suitable for mechanical engineering, steel construction, foundries, heavy assembly, and heavy-duty warehousing. Load capacity: 15,000 kg / 15 t Manufacturer: STOCKER Design: Double-girder bridge crane (top-running trolley) Isdpfxsy H R Iro Apmjaw Drive: fully electric (hoisting, trolley, and crane travel) Power supply: conductor rail / festoon cable Condition: used, serviced, fully functional Span, overall height, lifting height, and runway length available on request. Dismantling by specialist company required – on request, we can organize a quote.

Condition: good (used), Year of construction: 2010, operating hours: 284 h, fuel type: electric, color: other, Year of manufacture: 2010 Drive: Wheel GVW: 4.830 kg Dimensions (LxBxH): 321 x 174 x 239 cm Working height: 1.250 cm Holland Lift X-105EL18 Building year: 2010 Working hours: 284 h Working height: 13.5 mtr Platform height: 12.5 mtr Weight: 4830 kg Dimensions (L x W x H): 3.21 x 1.74 mtr Platform capacity: 500 kg Drive: 4x2 CE certified Price is excluded VAT Machine from our rentalfleet. (still in rental) For more pictures and productvideo look at our website Ijdpewp N Atofx Apmoaw Good working condition

Condition: used, Stick electrodes 2.5 x 250 Iasdpfjd Iy Ncex Apmew -Type: FOX DMO Ti -Price: per package -Number: 2 packages available -Weight per package: 3.3 kg