Mobile Knife

Horizon MKU-54

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, working width: 740 mm, stack height: 750 mm, overall weight: 2,445 kg, total height: 1,617 mm, total length: 3,880 mm, total width: 1,640 mm, input voltage: 380 V, Equipment: compressor, documentation/manual, Machine configuration: Horizon AFC-744AKT folding machine with palett feeder Horizon MKU-54 mobile knife unit Horizon PST-40 press stacker unit The machine is made in 2008 Counter status is: approximately. 93M Machine condition: used, full funncional The machine is in stock, it is possible to check and test Our company is official dealer and service of Horizon, our service technicians checked the macchine(s), everithing works perfectly. If need we can do demo or test on the machine. Isdpfx Ajy R Aufenvsau

Condition: good (used), Year of construction: 2002, Format trimmed: max 300 x 400 mm, min 85 x 115 mm Untrimmed format: max 320 x 460 mm, min 100 x 125 mm Output: max 6,600 c/h Equipment: - Fully automatic infeed with integrated stack counter - Cut counter - Cutting blower - 1 set of pressing plates and holders Ijdpfx Anoqqkvqsveau - 1 set of plate tables - 3 sets of cutting bars - 2 sets of knives - External device for knife change with setting gauge - Central lubrication - Operating instructions - Electrical circuit diagrams - Standard tools - Standard accessories

Condition: excellent (used), Year of construction: 2009, Horizon Brochure Production Line Collating Machines Horizon VAC 100a, VAC 100m Number of Stations: 2x10 Max. Format: 500 x 350 mm Min. Format: 148 x 120 mm Loading Capacity: 55 mm per station Speed: up to 9,500 cycles/h Weight: 320 kg per tower Machine Dimensions: 810 x 652 x 1,961 mm Power Supply: 230 V, 10.6 A, 2.3 kW HORIZON ST-40 Stacking Table Specifications Max. Format: 350 x 500 mm Min. Format: 182 x 128 mm Paper Thickness: 52 – 208 g/m² Speed: up to 8,000 sets/h Stack Height: 360 mm Machine Dimensions: 1,353 x 652 x 1,027 mm (L x W x H) SPF 200A Stitch-Fold Station Infeed Format (4-page sheet): min. 180 x 105 mm, max. 508 x 356 mm Brochure Final Size: min. 85 x 105 mm, max. 250 x 356 mm Brochure Thickness: up to 25 sheets, 100 pages Speed: up to 4,800 cycles/h Weight: 782 kg (with FC-200A front trimmer) Machine Dimensions: 3,450 x 810 x 1,250 mm (L x W x H) Power Supply: 230 V, 5.3 A; 1.0 kW Iodpfxsyhzube Anvoau Trimmer: FC 200A Available from 05/2026.

Condition: used, Year of construction: 2005, Three knife trimmer Kolbus HD 150.B Year: 2005 Description: - Right hand infeed - Automatic hopper feeder for inline production - Cut counter - Exchangeable cutting tables (standard set) Iaedpfjvf Dtyjx Anvju - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2

Condition: excellent (used), Year of construction: 2010, with flap left & right, dimensions: approx. 1.660 x 1.250 mm Ijdpog Du H Hjfx Anvoau

Condition: used, Dreimesserautomat / Three Knife Trimmer Hörauf SN-140 Demand Baujahr / Year 2000 - Serial-No. 405060080 Formatbereich (unbeschnitten) / Paper size (before cutting) min. 80 x 60mm - max. 410 x 315mm Iaedpfswnpm Nsx Anvsu Formatbereich (beschnitten) / Paper size (after cutting) min. 80 x 60mm - max. 380 x 300mm Stapelhöhe / Pile height max. 80mm Leistung bis zu 20 Takte/min. / Speed approx. 20 cycles per minute Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Iodjtvau Aepfx Anveau Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: excellent (used), Overview The MultiGraf 435SM is a robust, fully-automatic modular folding system — professionally refurbished and ready for immediate production. Designed for high-accuracy folding across a wide range of applications, this machine features four automatic folding plates and a precision suction feeder, delivering reliable results whether you’re producing high-volume leaflet work, cross-folded mail inserts, or specialist pharmaceutical folds. Thanks to its modular engineering, the 435SM can be expanded with cross-fold units, high-capacity feeders, miniature fold plates and vertical stackers — allowing the system to evolve as workflow demands increase. Fast setup via the Touchline digital control panel ensures efficient job changes, while the combination steel and rubber roller system provides clean, consistent folds even at high speeds of up to 25,000 sheets per hour. Ideal for commercial print rooms, mailing departments and finishing operations requiring flexible, high-quality, and upgradeable folding capability without the investment of a brand-new machine. Key Features Four fully automatic folding plates — wide range of fold configurations including complex pharmaceutical folds Precision suction feed system — consistent, mark-free handling across varying paper stocks High productivity — speeds up to 25,000 sheets/hour, ideal for short to medium run folding Touchline touchscreen control — quick setup, easy adjustment, and built-in batch counting 500-sheet feed table — stable, continuous feeding for longer production runs Combination steel and rubber rollers — accurate, uniform fold quality Modular upgrade path — compatible with cross-fold units, high-capacity feeders, miniature plates and more Paper size range A6 to A3+ — versatile handling for both small-format and large-format folding Optional scoring and perforating unit — for enhanced finishing capabilities Maximum paper size: Standard: 375 × 500 mm With optional extension table: 375 × 650 mm Specifications Manufacturer Multigraf Model 435SM Min sheet size 90mm x 120mm Max sheet size 375mm x 500mm or 660mm with extension Paper weights 40gsm - 250gsm Iedpfx Anjx Sya Ieveau Feeder system Suction - bottom feed Speed Variable - up to 25,000 per hour Control panel Icon based touchscreen Electrical requirements 230v 50/60Hz Machine weight 174kg Machine dimensions (L)1535mm x (D)500mm x (H)1225mm

Condition: ready for operation (used), Baler Hsm vk 42/1200 fully automatic Pressure force: 42 tons Beam dimensions: 700 x 800 x 600 - 1200 mm Iaedpera Nrxjfx Anvou Beam weight: approx. 450 kg Press length approx. 7 meters press weight approx. 6000 kg tying 4 x wire automatically

Condition: good (used), Size: max 370 x 320 mm, min 105 x 75 mm Iaedpfelk Hx Rjx Anvsu Book block thickness: max 70 mm Speed: max 5000 c/h Equipment gathering machine: • 16 stations • criss cross delivery • missing sheet and double sheet control