HSM VK 88 + Stadler KF1800

HSM VK 8818

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 100 t, Technical specifications: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Theoretical idle throughput: 643 m³/h Theoretical capacity at 50 kg/m³: 32.15 t/h Feed opening width x feed opening length: 970 x 1,800 mm Bale width x bale height x bale length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with appropriate shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER conveyor - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire coil trolleys - 1 multi-control system for the baler - Full construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Weight: 33,000 kg Tying method: wire Processable materials: plastic film, mixed paper, cardboard, hollow HDPE/LDPE containers, and plastic bottles The system is operational and can be inspected during operation. Hjdpfxeygud Ae Aahju The machine will be dismantled on 16/02 and can then be inspected at our facility. Immediately available!

Condition: used, Year of construction: 1992, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 4 S1 Year of prod. 1992 Capacity: 4,000 for 1.5 L / 2 L bottles Installed power: 150 kW Includes 1.5 L molds Preform feeder Hodpfxewa Rhrs Aahju Technical condition: used machine, starts up, program is functional

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, sheet thickness (max.): 60 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), Equipment: cone bending device, documentation/manual, 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls 570 / 500 / 430 mm Rolling width: 3100mm Hodpszbqquefx Aahou Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Dimensions: L 6990 mm, W 2500 mm, H 2720 mm. Weight 4191 kg. Tipping device for 140-660 l containers Hedjvkn Nvopfx Aaheu

Condition: repair required (used), Year of construction: 2003, operating hours: 12,500 h, functionality: not functional, Hammel VB 850 E stationary with magnet + 2 pairs of new shafts Machine is without gearbox. Hsdpfx Ajyt Iawsaheu

Condition: excellent (used), Year of construction: 2024, operating hours: 5,400 h, functionality: fully functional, A scrap shear (Lefort Trax 650) in excellent condition is for sale. Viewings can be arranged by appointment. The machine is available immediately. Hodpfx Aaez Ak Dveheu

Condition: good (used), Year of construction: 2000, control type: NC control, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), Equipment: cone bending device, 4 roll plate bender Davi Promau - MCB-3037 MACH-ID 9751 Make: Davi Promau Type: MCB-3037 Hsdjzi Ra Repfx Aaheu Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication CE-Declaration Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, LVD Shear Hodpfox Tqtbsx Aahju Type HST C-10/31 Capacity 3000 x 10

Condition: reconditioned (used), 20 cubic meter skip loader container with usable volume for roll-off tippers Beringer BPx5 Reconditioned, inspected, and serviced Two-sided mounting Hjdpfjwifmzox Aahju Side-hinged discharge door Ramp operation possible Machines are reconditioned, inspected, serviced, and repainted in the desired standard RAL color. We will gladly prepare an offer including delivery.

Year of construction: 1978, condition: ready for operation (used), A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible. Hsdpfx Aaszka H Aohou