End Sheet Tipping machine

Hunkeler VEA 400

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. Gbedoyx Uy Aopfx Ap Dju • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Year of construction: 2026, condition: new, The fruit washer with a mill for fruits and vegetables is made entirely of stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water for a pre-wash. Afterwards, they are transported further via the conveyor belt, which thoroughly cleans the fruits with fresh water. After cleaning, the fruits enter the mill, where they are processed with the desired sieve to achieve the required mash consistency. • Easy to clean • Low maintenance requirements • Belt speed is steplessly adjustable in both directions • Equipped with 2 swivel wheels Gsdpsv Srguofx Ap Dsbu • Equipped with 2 fixed wheels Technical Information • Nominal capacity: 2000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1400 mm • Connection for washing tank: G 6/4” • Connection for cleaning: G ½” • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg

Condition: ready for operation (used), Year of construction: 2014, A hot stamping system is available for hot stamping the silver edge on instrument panels. Heating capacity: 5.6 kW, stamping force: 20 kN, max. pressure: 6 bar. Including laminar flow module Spetec Super Silent. Documentation available. On-site inspection is possible. Gbsdpjuyk S Aofx Ap Dju

Condition: good (used), Year of construction: 2001, CNC turning machine Gedjk Hz Iwopfx Ap Dobu Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L YEAR OF MANUFACTURE: 2001 2-axis CNC turning machine with robotic loading Description: Two-axis X-Z turning machine for short workpieces, equipped with a robotic workpiece magazine X-AXIS: 180 mm Z-AXIS: 325 mm Spindle speed: 4500 rpm Coolant system and chip conveyor

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Gbodpfjh Nypfex Ap Dsu

Condition: used, Year of construction: 2022, Machine is in perfect condition in small woodoworking shop. Gbedpfx Apoy S U Duj Deu

Condition: used, Year of construction: 2011, Sewing machine Meccanotecnica Universe Year: 2011 For high quality digital print finishing. The UNIVERSE SEWING performs 3 operations in standard mode: Sheet feeding, creasing, folding and collating and stitching. Configuration: • flat sheet feeder • pc Siemens with touchscreen • GigaLynx sheet control • folding and collating station • thread sewing machine • belt delivery (counter approx. 9.700.000 mio. stitches) Technical specifications: speed plano sheet feeder: up to 300 plano sheet(A4)/min mechanical stitching speed: up to 50 folded sheets/min size range plano sheet max.: 420 x 640 mm size range plano sheet min.: 150 x 200 mm Gjdpfxex Sybfs Ap Dsbu size range folded sheet max.: 420 x 320 mm size range folded sheet min.: 150 x 100 mm number of stitches max.: 10

Condition: new, Year of construction: 2025, HEAD AND TAIL BAND MACHINE Gedpjh S Uv Eofx Ap Debu MAGRAF KV-10 PLUS

Condition: good (used), machine/vehicle number: 2029, Printing press Boston Tiegel A4+ Hohner Tiegel, electric/with motor, machine number 2029, in good condition, immediately available. 2 machines available. If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to inspect the machine at our premises by prior appointment. Gbjdpfxsxc Euco Ap Deu

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Gedpfx Ajw Hrrrjp Dobu Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt