Machining center

HURCO VM 1

Condition: good (used), Year of construction: 2004, operating hours: 21,000 h, Hurco 3 axis vertical machining center in good condition with ca 21000 operating hours. Ready for immediate delivery (dismantled and transport ready). Cnc control Hurco Ultimax X-axis 600 mm Y-axis 355 mm Z-axis 455mm Motor 7.4 KVA Frequency 50 Hz Iodex Uqm Dopfx Adwsht Full load 13 KVA AC volts 3 phase 400 Capacity Tool Magazine 16 positions Type of tool holder SK40 Max spindle speed: 8000 rpm Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 400 mm z-travel 400 mm control MSX 501 Mori Seiki table surface area 700 x 450 mm max. table load 350 kg number of T-slots 4 T-slot - width 18 mm T-slot - distance 100 mm Number of revolutions 12.000 U/min power capacity - main spindel 18,5 / 15 / 11 kW tool taper BT 40 max. Torque 110,5 Nm diameter of forward milling spindle bearing 70 rapid travel x/y/z 20.000 mm/min feed speeds 1 - 20.000 mm/min Tipp feed 15 Steps / 0 - 1.260 mm/min Number of Toolpositions in magazine 40 Pos. Max. mould width 80 mm max. tool-dia with free toolbox 125 mm max. tool length 250 mm max. tool weight 8 kg change-time chip to chip 2,8 sec change-time tool to tool 1,0 sec total power requirement 34 kVA weight of the machine ca. 7,2 t dimensions of the machine ca. 2,8 x 3,0 x 2,9 m Machining Center Vertical MORI SEIKI - NV 4000 DCG Ijdpsv Az Ucofx Adwjht - ca. 14.000 Operating-Hours

Condition: used, Year of construction: 2006, Offer, subject to change: 1 used vertical machining center Manufacturer: Hurco, Type VM1, Serial number H-V12319, Year of manufacture: 2000 Control: ULTIMAX 4 Table dimensions: 762 x 356 mm X travel: 660 mm Ihjdpfewl H Rmox Adwet Y travel: 356 mm Z travel: 456 mm Spindle speed range: 10 – 10,000 rpm Tool changer: 20-station SK40 tool holder Rapid traverse rates X/Y/Z: 28 m/min Drive power: 11 kW Space requirement: L x W x H: 2,000 x 1,800 x 2,600 mm Weight: approx. 2,900 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Hurco machining center VM 1 very good condition x-way: 660 mm y-travel: 355 mm z-travel: 455 mm Ihodpfx Adorxfxhjwot Control system: Ultimax Table clamping surface: 760x355 mm Table load: max. 340 kg Tool magazine with: 16 places Tool holder: SK - A40 Spindle speeds: 10-10000 rpm Spindle hours Total power requirement: 7.8 kW Machine weight approx.: 3.8 t

Condition: reconditioned (used), Year of construction: 2017, operating hours: 6,900 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, Max. Workpiec dimesion 1200 x 850 x 450mm Ihodpfjv Ai Ukjx Adwst Workpiece wight max. 1600 Kg Travel X 600 mm Y 400 mm Z 450 mm C 360 ° Year 2017 Toolchanger 16 Elektrodes RTC

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: VMX106205017CHB, travel distance X-axis: 660 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 457 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Control: Ultimax 4 system version 2.37.01e (Patch F) / 2.6.04i Table dimensions: 760 mm x 355 mm Travel X: 660 mm Travel Y: 355 mm Travel Z: 457 mm Spindle Spindle speed: 10 - 10,000 rpm Clamping device holder: SK40 Feed rates Rapid traverse X/Y: 22,500 mm/min Iodpexy Nq Asfx Adwsht Rapid traverse Z: 3,810 mm/min Tool changer Tool changer: 20-way MACHINE DETAILS Floor area (L x W x H): 2,600 mm x 1,600 mm x 2,500 mm Weight: approx. 3 t

Condition: excellent (used), Year of construction: 2007, Vice NOT included Comes with a small selection of tooling. Ijdpfxoxwlx De Adwjht X Axis Travel - 660mm, Y Axis Travel - 356mm, Z Axis Travel - 457mm, Max Table Load - 340kg, Spindle Motor - 10HP, Spindle Speed - 8000RPM, Spindle Taper - 40CT, Tool Changer - 20ATC

Condition: used, Year of construction: 2007, turning diameter 42 / 140 mm turning length 170 mm control Mitsubishi Meldas turning speeds 80-8.000 U/min c-axis 0,001° turret (x-stations) 2x 12 (VDI 20) angetrieben turning speeds 45-4.500 U/min spindle 1 kW gripping station 42 mm turning speeds 60-6.000 U/min c-axis 0,001° number of controlled axis 8 collet unit 48 DIN 6343 . Number of working hours 10769 h chip conveyor ja/yes Bj. 2018 Ihedpjvyli Eefx Adwet total power requirement 7,5 / 11 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 2,4 x 1,6 x 2,2 m CNC turning and milling machine CITIZEN BOLEY BE 42, year 2007 Simultaneous working with 7 axes on main and pick-up spindle very good condition, operating hours 21.999h (September 2024) Accessories: # Various tool holders: 5x axiale driven tool holder # collet chuck for collets type 173E # additional coolant cooler # Knoll chip conveyor, year of construction 2018 The Boley BE 42 is without barloader. Loading magazine interface has been fitted. Complete battery exchange on 22.12.2025

Condition: ready for operation (used), Year of construction: 2006, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: VMX1-06229016BHB, travel distance X-axis: 660 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 450 mm, table width: 762 mm, table length: 356 mm, TECHNICAL DETAILS Travel Paths Travel X-axis: 660 mm Travel Y-axis: 350 mm Travel Z-axis: 450 mm Table and Mounting Table clamping surface: 762 x 356 mm Mounting: SK 40 DIN 69871 Ijdpfx Adsw Eiaqowoht Spindle and Tools Speed: 10 - 10,000 rpm Tool station capacity: 20 stations Control: ULTIMAX 4 MACHINE DETAILS Electrical Data Voltage: 400 V Number of phases: 3 Frequency: 50 Hz Operating hours: 25,000 hours Dimensions & Weight Dimensions: 2,000 x 1,800 x 2,660 mm Weight: 2,900 kg

Year of construction: 2002, condition: ready for operation (used), Machining center Hurco VM 1 spindle speed max. 8000 rpm traverse path: X: 660mm Y: 406mm Z: 508mm Isdpfxji E Iacs Adweht spindle 2000 hours complete software options DXF tapping without chuck all tools are included , Hilma Schraustock drawer shcrank with tools

Condition: used, Year of construction: 2000, Technical details: x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm b-axis: manuell positionierbar ° c-axis: manuell positionierbar control: Heidenhain TNC 124 tool changer with: nein Plätze spindle taper MT: SK40 Revolution per minute: 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 14000 mm/min rapid traverse:: 5,0 m/min table-size: 700 x 500 mm total power requirement: 17 kVA Weight approx.: 2,91 t dimension machine xH: 2,0 x 2,0 x 2,5 m Ijdeu Idffepfx Adwsht CNC universal vertical milling machine The machine has 5 axes. B- and C-axis manual with measuring system. B-axis table swivel -10° / +95° and C-axis table rotate 360° (not interpolatable, manually selectable via control). Cooling device (without pump) Operation via swiveling boom *