Clamping plate

Meuselwitz 3000/1335/H250 mm

Condition: excellent (used), Year of construction: 2008, 5-axis simultaneous DMG DMC60U duoblock Very good condition! Operating hours: 78,000 h Klodpfxswglnyj Apdeu Spindle hours since replacement: 5,900 h (2022) 2023: XZ sliding plate replaced The machine can be inspected at any time by arrangement. Control: iTNC530 Heidenhain Travel: X-600 mm, Y-700 mm, Z-600 mm B-axis: -30 / -180° C-axis: 360 ° endless Spindle mount: SK40 Spindle speed: 20 - 12,000 rpm tool magazine: 60 seats Turntable diameter: 630 mm Pallet size: 630 mm x 630 mm Internal coolant supply (IKZ): 40 bar Belt filter system: Belt filter system equipment: Measuring probe, electric handwheel, documentation, two zero-point clamping systems; Belt filter system: Belt filter system

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Kledpfx Asv Tk Exspdou Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 250 h, machine/vehicle number: 0131, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 670 kg, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, T U B O M A T – simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small series production. The software allows individual tubes to be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Standard bending equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-fold preselection of bending angles or program mode - 80 memory locations for up to 10 sets - Actual/target value display for bending angles - Compact, forward-positioned bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic pressure die actuation - Hydraulic mandrel extraction - Mobile use possible - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base holder as drive unit for assembly attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235, Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Max. bending angle: 180° (+10° overbend) - Bending accuracy: ±0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Electrical connection: 400 V / 50 Hz / 3 phase - Power supply requirements: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic tube bending software package - Oracle Express database for single-user application - Creation of isometries (single tube) - ConCSVImp – import interface for CSV format - Calculation of bending data taking springback, elongation, and spring-in into account - Checking of clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool design - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool holders 1 set of adapters for bending rollers with 25 mm bore 1 clamping piece adapter installation space 100 mm 1 support for fixed pressure die installation space 100 mm Tools Bending tools consisting of bending roller, clamping piece, and pressure die (fixed) Tube diameters / Bending radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm Klodpex E Rdwsfx Apdeu - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel tubes Design with lubrication channel for minimal quantity lubrication (MQL) - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly studs for cutting ring fittings (L = light, S = heavy design) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Back-up plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses possible. The machine is used but in like-new condition. The machine can be inspected and demonstrated by prior arrangement. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors.

Condition: used, Year of construction: 1987, Technical details: grinding length: 600 mm grinding width: 350 mm workpiece height: 600 mm feed: 1 - 30 m/min magnetic plate size: 610 x 255 mm distance table - spindle center: min./max. 150 / 420 mm grinding spindle speed: 3000 U/min stroke of the table: min./max.: 200 / 650 mm total power requirement: ca. 4,0 kW weight of the machine ca.: 2,5 t dimension machine xH: 1,5 x 1,9 x 2,0 m dimension coolant device LxWxH: 0,63 x 0,40 x 0,65 m Headstock: -vertical travel Y = 0.002 - 0.06 mm -adjustment = 0,001 - 2mm Cross slide: -transverse travel Z = 360mm Klsdpfxeu Ngics Apdou -feed adjustment = 1 - 60mm/stroke -rapid traverse = 1.2 m/min. Dressing manual Cooling water unit with capacity 140Liter Equipment: -3x support feet -machine lighting accessories: -alignment device for grinding wheel holder *

Condition: used, length:1800 mm width:1200 mm Kodocxxu Djpfx Apdolu weight of the machine ca.:1,6 t dimensions of the machine ca.:1,8 x 1,2 x 0,4 m

Condition: excellent (used), Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 80,000 m/min, rapid traverse Z-axis: 48,000 m/min, table width: 835 mm, table length: 3,500 mm, table load: 3,500 kg, 1 Axis CNC Swivel head, infinitely variable Axis drive with ball screw drive Roller linear guides in all axes Direct path measuring systems Full work area encosure with roof Chip conveyor Coolant unit X - Travel: 3000mm Y - Travel: 825mm Z - Travel: 1100mm B - Axis: - 3 to + 105° Table Length: 3500mm Table Width: 835mm Table load: 3500 Feed rate X-Axis: 48000mm/min. Feed rate Y-Axis: 80000mm/min. Feed rate Z-Axis: 48000mm/min. Spindle Taper: HSK 100ISO/Bt/Mk Power on spindle: 37kW Kodpfxswyv Nzj Apdelu Speeds / ranges: 8000Rpm ATC / revolver: 40 Coolant through spindle / Bar:25 Number of controlled axis: 4 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3800mm Height: 3800mm

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF-KBK1, DEMAG KBK crane sky crane track dimensions approx. 12m x 3.5m Please inquire about other dimensions! Payload / lifting load 125 KG - 0.125ton Technical data of the system: Crane track made from Demag KBK1 rails The system is delivered complete: Kedpfx Aspiarnjpdelu KBK rails, rail connectors, chassis, end plates, cable drag, power supply, holders/suspenders etc. including 1 bridge with 125KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please ask for your crane runway with cantilever capacity and dimensions.

Condition: new, Year of construction: 2024, ✅ New goods ✅ Top price ✅ Immediately available ✅ Shipping possible ◾ SCHORR electric high lift truck ◾ Model RR12HH with 3500mm lifting height ◾ Low maintenance and smooth running ◾ Including 24V batteries and charging station ◾ 1.2t / 1200kg load capacity ◾ Top price-performance ratio ◾ AVAILABLE IMMEDIATELY! Gross price: 3.399,00€ incl. VAT Net price: 2.856,30€ excl. VAT The electric high lift trucks from SCHORR offer an excellent price-performance ratio. The off-centre drive unit allows a small turning radius with best all-round visibility. Each model is equipped with a multifunction tiller which displays the current battery level and can be started via the ignition lock. The tiller can be operated with both hands and also has a worm mode. The design of the pallet truck is both robust and easy to maintain; impact-prone areas are equipped with yielding plastic. The emergency stop switch is centrally located for easy access at all times. The lift trucks are equipped with tandem load rollers as standard, which overcome uneven surfaces such as paving stones with low noise and vibration. Klsdpoidqr Sefx Apdsu TECHNICAL DATA see picture Further data and information on request, we look forward to your call or message!

Condition: new, Wet exhaust system - available in steel and stainless steel - suction output 1650, 3750 or 7000 m3/h Klsdeci Tlrepfx Apdsu - engine 3,5.5 or 15 kW

Condition: excellent (used), Year of construction: 1997, pressure 170 t chamfer lenght 4080 mm Kjdpfexcp Rbjx Apdjlu distance between columns 3680 mm column arm 410 mm dayligth 385 mm stroke 215 mm ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec table width 200 mm table height 1050 mm Number of working hours 25.430 h oil volume 350 l total power requirement 29 KVA weight of the machine ca. 16.450 kg. range L-W-H 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes (!!) - in checked conditions - machinevideo - ?v=yEaRj0XJAC4 Equipment: - CNC electro-hydraulic press brake/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tool and product library * Graphic 2D programming * Automatic bend sequence calculation and collision detection * Emergency stop button at front - CNC axis adjustment: * Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 axis + CNC crowning - X axis - adjustment speed: 500 mm/sec. * Max. stop range: 860 mm - R axis - Adjustment speed: 300 mm/sec. * Max. travel: 250 mm - Z axis - Adjustment speed: 1000 mm/sec. * Max. travel: 3260 mm - CNC electric motor table crowning - CNC electro-pneumatic die shift (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x freely movable foot switch - Side safety device (swivel doors) - Rear safety device (sliding doors) - Original operating instructions