Cold Circular Saw

IMET SIRIO 350 AF-E CEB

Condition: good (used), machine/vehicle number: RTT HAU T3, Used rotary table polishing machine Manufacturer: Hau Rotary table with 6 working spindles and 3 polishing stations with high pressure guns, 5,5 kW motors, Klsdpfsh Ug Ulsx Abcjp control cabinet

Condition: used, CNC machining center BIESSE Rover C 6.50 CONF.2, year 2007 Working area: approx. 140 × 460 cm Machine dimensions: 300 × 650 cm Weight: approx. 6,100 kg Klsdpfxjw Rpd Se Abcjp Two working heads Tool magazine: 22 positions Vertical drilling spindles: 28 pcs Horizontal drilling spindles: 12 pcs Price negotiable, available immediately. Price is without VAT.

Condition: good (used), Year of construction: 2005, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2005 Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Outut table automatic 6 pcs. kickers on left outfeed table Kljdpextxg Hofx Abcsp Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Year of construction: 2004, condition: good (used), A used good condition double miter cold circular saw machine from KASTO Model: "KASTOdisc A10". - Fully automatic operation - Single cut - Hydrasulic saw bars - Central lubrication for saw guides - Coolant device - documentation Saw blade diameter 350mm Cutting range round 90°/ 45° 100/ 100mm square 90/ 45° 100x100/ 100x100mm Rectangle 90°/ 45° 170x100/ 130x100 Shortest remaining piece length with single cut at 90° 30mm Shortest remaining piece length in automatic mode at 90° 260mm Working height 950mm Ksdpfxjkfvhke Abcslp Dimensions WxDxH 1530x1348x1890 mm Weight 980kg Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck Kledpfxeg Dvdce Abcsp - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, SEMI-AUTOMATIC CIRCULAR SAW MEP TIGER 352 SX EVO - Blade rotation at 4 speeds (15/30/45/90 rpm) - Rotating table mounted on central spindle and axial bearing - Cutting head feed on double linear guideway Klsdpexdr Rtsfx Abcjp - Mechanical stops at -45°, 0°, +45°, and +60° with locking device at any angle - User interface with display

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 1,909 h, Phantomatic X 6 HP with only 1,909 operating hours! Machining center with 4 CNC-controlled axes for processing profile bars or parts made of aluminum, PVC, non-ferrous metals, and steel up to 7.7 m in length. Special equipment: - Barcode scanner - H+P axes with end stops and clamp displacement - Profile length measuring device - CamPlus - Four-sided machining - MG Pilot hand control unit Operating Mode 1: Utilization of the entire available machining length of up to 7.7 m. Operating Mode 2: Pendulum operation, which splits the machine into two machining zones. This allows for alternate loading and unloading on one side while processing continues on the other. On the X6 HP model, the positioning of the clamps is achieved using two additional axes, independent of the main processing time. The machine is equipped with an automatic tool changer with 8 positions moving along the X-axis gantry, accommodating 1 angle head and a disc cutter for five-sided machining of the workpiece. The 4th CNC axis enables rotation of the milling spindle from 0° to 180°, with positioning at any intermediate angle. This allows the machine to perform machining operations on the top and sides of the profile at any angle within its range. In addition, a movable work table facilitates loading and unloading of the piece and significantly increases the workable cross-section. Machining center suitable for dynamic pendulum operation 4-axis X-milling spindle head The milling spindle with 7 kW S1 high-torque drive enables heavy-duty machining. The movement of the spindle along the A-axis allows rotation from 0° to 180°, so the profile can be machined on 3 sides without repositioning. Can be used for certain types of steel press profiles as well as aluminum profiles, thanks to a lubrication system that can be adjusted via software and whose dual tank allows the use of both minimum quantity diffusion oil and micro-mist with oil emulsion. Very little used and in excellent condition! Kjdpfsyn Sgqox Abcelp

Condition: excellent (used), Year of construction: 2006, operating hours: 14,300 h, functionality: fully functional, machine/vehicle number: 414-46, Year 2006 with Fanuc Series 18i-MB5 Country of manufacture: CE - Germany Net machine weight: 3,400 kg Dimensions: 185x259x250 cm TECHNICAL SPECIFICATIONS Travel X / Y / Z: 450 / 270 / 310 mm Acceleration X / Y / Z: 0.7 / 0.7 / 1.0 g Rapid traverse X / Y / Z: 40 / 40 / 60 m/min Spindle speed max.: 15,000 rpm Tool interface: HSK A 40 Milling capacity in St 60: max 60 cm3/min Drilling capacity in St 60: max Ø 16 mm Threading: up to M12 Tool magazine / positions: 24 – special version with 40 on this machine Tool change time: approx. 0.8 sec Chip-to-chip time: approx. 2.2 sec 5-axis version NC rotary tilting table: +/- 100° Rotary plate diameter: 100 mm Kodpfx Ajxqmwbsbcslp Grid drill pattern: M6 x 50 mm 4th axis speed: 40 rpm 5th axis speed: 60 rpm Direct measuring system for 4th and 5th axes: +/-20’’ / +/-20’’ Distance spindle nose – table surface: 170 – 450 mm Maximum workpiece weight: 6 kg Technical information is provided without engagement and subject to errors or omissions.

Condition: ready for operation (used), Year of construction: 1996, This Emmegi Radial Star TU/6 was manufactured in 1996. A used double miter saw, it features a roller conveyor, clamping device, and upgraded PC control. Its design is precise, stable, and robust, ideal for detailed metal sawing tasks. Consider the opportunity to buy this Emmegi Radial Star TU/6. Contact us for more information. • Condition: Used, well-maintained, and ready for use Kedpfx Absx D D Auecslp • PC control: Upgraded • Design: Precise, stable, and robust • Note: No dust extraction • Additional equipment • Roller conveyor, right-hand side, 3000 mm • Clamping device (section side) • Spacer profile for roller conveyor (LMS-D 450/500) • Pneumatically swiveling material roll support • Lubrica lubrication unit for LMS-D • Digital miter display for pre-selecting intermediate miters (LMS/LMS-D) • Label printer UBI Easy Coder 101 for LMS-D • Thermal paper roll labels with removable adhesive (for Formula 21/S or UBI Easy label printers) • Software extension for extra-long cutting up to 9000 mm (LMS-D) • Software extension for cutting corner angles • Software extension for cross-cutting • Drivers for Schüco systems

Condition: used, Year of construction: 2005, CNC Machining Center HARDINGE BRIDGEPORT XP610 (Year 2005) Condition: Good, technically sound. Manufacturer: Hardinge / Bridgeport (USA / UK) Model: XP610 Year of manufacture: 2005 A compact and reliable CNC vertical machining center designed for precise milling, drilling, and tapping of metal parts. The Bridgeport XP series is known for its high accuracy, robust construction, and reliable control system, making it an excellent solution for manufacturing processes where precision and repeatability are crucial. Main technical specifications: (according to Hardinge Bridgeport XP610 model specifications) Control system: Heidenhain iTNC 530 Travel (X / Y / Z): 610 × 510 × 510 mm Table size: 800 × 520 mm Max. table load: 500 kg Spindle speed: up to 10,000 rpm Spindle taper: BT40 Tool changer: 20 positions (automatic) Spindle motor: 11–15 kW Cooling: integrated coolant system Kodpfxoxqp Ens Abcolp Power supply: 400 V / 50 Hz Machine weight: approx. 6,000 kg Application: The Hardinge Bridgeport XP610 is designed for precision machining of components and parts: - Metal, aluminum, copper, and brass workpieces - Tool and die manufacturing - Production of mechanical components and industrial parts Suitable for both small batch and series production where a precise, stable, and repeatable result is required. If you have any further questions, please feel free to contact us.