CNC Turning- and Milling Center

INDEX G300

Year of construction: 2008, condition: ready for operation (used), Two Index CNC turning and milling centers are available. 1) Index G250, year of manufacture: 2008, swing diameter: 560mm, turning length: 800mm, bar capacity: 90mm, spindle diameter: 140mm, spindle speed: 3500rpm, spindle power: 43kW/57kW, torque: 275Nm/363Nm, indexing: 2.5°, tool speed: 6000rpm, tool drive power: 11kW, X/Z travel: 300mm/800mm, rapid traverse X: 30m/min, rapid traverse Z: 22.5m/min, feed force X/Z: 7200N/9000N, quill diameter: 65mm, machine dimensions X/Y/Z: approx. 7300mm/4000mm/2600mm, weight: approx. 14000kg, control: Siemens 840D C200-4D. 2) Index G300, year of manufacture: 1998, retrofit: 2022, turning diameter: 270mm, turning length: 710mm, max. swing diameter: 590mm, main spindle bore: 65mm, spindle diameter: 110mm, spindle speed: 5000rpm, torque: 275Nm, power: 43kW, tailstock center distance: 740mm, max. thrust force: 10kN, short slide travel X/Y: 215mm/180mm, short slide travel Z: 710mm/1250mm, feed force X/Y/Z: 8kN/16kN/13kN, rapid traverse: 20m/min, tool stations: 12. Documentation available. An on-site inspection is possible. Dsdpfeznmxmox Adrsck

Condition: good (used), Year of construction: 2018, functionality: fully functional, measuring range X-axis: 1,500 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 700 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: Reference XI 15.9.7 Year of manufacture: 2018 Manufacturer: Hexagon Measuring range: 1500 x 900 x 700 mm Dcodsyg I Hdopfx Adrjk Accessories: Probe head mount: HP-SX-5 probe head Probe head: +2 change discs Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0, Controller B5 As specialists, we are pleased to offer you tailored advice to find the right machine for your measurement requirements. We offer worldwide delivery upon request!

Condition: used, Year of construction: 1995, turning diameter 300 mm turning length 710 mm control SIEMENS SINUMERIC 840 total power requirement 40 kW weight of the machine ca. 6000 kg dimensions of the machine ca. m I N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstock and INDEX CNC Control C 200 – 4 (SIEMENS) Model G 300 Year 1995 S/N 5000 65 _____ Turning - Ø, with chuck, max. 300 mm Spindle bore 90 mm Max. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mm Turret head slide cross movement (Z-Axis) max. 140 mm Turret with 12 tool holder positions DIN 30 mm Feed range of turret slide / Quickfeed 0,1 - 20 m/Min. Feed Force of X/Z-Axis 8 – 13 kN Steplessly adjustable Spindle speeds up to 5.000 rpm Torque Forceon main spindle approx. 275 Nm Spindle drive 28 kW Total electrical load appr. 40 kW - 400 V - 50 Hz Weight 6,000 kg Accessories / Special Features: * INDEX CNC Control Model C 200-4 resp. SIEMENS 840 C for 3 Axes X/Z Axis and Main spindle as C-Axis (Spindle Orientation) Control Panel mounted swivable on front left side of machine. * Spindle orientation in 2,5° degree steps and Spindle indexing device Dcodpot Hw Sujfx Adrok * Mounted hydraulic 3 Jaws Chuck make FORKHARDT Model HS 250 with many Sets of jaws. Speed up to 5.000 rpm * INDEX- Turret with 12 positions for DIN 30 tool holders, prepared for driven tools and motorized by the indexing motor, Choice of approx. 40 pieces toolholders * Hydraulic Tailstock with stroke of 50 mm and with concentricity correction device * KNOLL – Swarf Conveyor with Coolant Device and High Pressure Pump, Sliding door, Oilskimmer, etc. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1995, turning diameter 250 mm turning length 750 mm control Siemens type 840 c spindle passage 65 mm Tool changer 2 live tooling 2x Revoler weight of the machine ca. 7 t Main and counter spindle 3-jaw chuck with numerous jaws Hainbuch collets Many tool holders Various driven tools Bar loader "Index MBL" Chip conveyor with coolant unit Complete set of spindle reducers etc. see photo The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Dcjdpfxjzfqhys Adrsk More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2015, turning diameter 210 mm turning length 1000 mm control Fanuc 31i max. turning speeds 5.000 min/-1 drive capacity - main spindle 15 kW max. torque 476 Nm bar passage 65 mm x-axis 250 mm z-axis 1050 mm x2-axis 150 mm z2-axis 1030 mm spindle hours ca. 700 h accessories: Lünette, Späneförderer In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical details: - approx. 500 spindle hours Dedjxq R Evopfx Adrsck Accessories: - Steady rest - Chip conveyor Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 6,000 rpm, travel distance X-axis: 140 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 1,245 mm, spindle motor power: 9,400 W, total height: 2,100 mm, total width: 2,150 mm, overall weight: 8,330 kg, product length (max.): 7,250 mm, number of axes: 7, This 7-axis Index G300 L YB was manufactured in 1999. It features a maximum turning diameter of 270 mm and a maximum swing diameter of 590 mm. The machine includes a robust tool system with 12 stations and a milling spindle speed of up to 6000 rpm. If you are looking to get high-quality turning capabilities, consider the Index G300 L YB horizontal turning machine we have for sale. Contact us for further details. • Power supply: 3 phase / 50 Hz • Rated voltage: 400 V • Control voltage: 24 V • Rated current: 120 A • Rated power: 67 kW • Electrical cabinet weight: 710 kg • Spindle bore: 65 / 90 mm • Spindle bearing diameter (front): 110 / 140 mm • Spindle nose: ISO 702/1 size 6 / 8 • Chuck diameter: 200 / 250 / 315 mm • Maximum turning diameter: 270 mm • Maximum swing diameter: 590 mm • Power (100% duty cycle): 19 / 28 / 43 kW • Power (40% duty cycle): 28 / 40 / 57 kW • Torque (100% duty cycle): 120 / 178 / 275 Nm • Torque (40% duty cycle): 178 / 255 / 363 Nm • Maximum speed: 5000 / 3500 rpm • Counter spindle bore: 65 / 90 mm • Counter spindle bearing diameter: 110 / 140 mm • Counter spindle nose: ISO 702/1 size 6 / 8 • Counter spindle chuck diameter: 200 / 250 / 315 mm • Counter spindle power (100%): 19 / 28 kW • Counter spindle power (40%): 28 / 40 kW • Counter spindle torque (100%): 120 / 178 Nm • Counter spindle torque (40%): 178 / 255 Nm • Counter spindle max speed: 5000 / 3500 rpm • Minimum distance between spindles: 20 mm • Longitudinal travel: 770 / 1310 mm • Rapid traverse: 22.5 m/min • Rapid traverse X: 24 m/min • Rapid traverse Z: 30 m/min • Rapid traverse Y: 24 m/min • Tool system: VDI 30 • Number of tool stations: 12 • Max boring bar diameter: 50 mm • Milling spindle speed: up to 6000 rpm • Milling spindle power: 9.4 kW • Milling spindle torque: 19 Nm Dedpjyyyy Defx Adrsck • Tailstock stroke: 630 mm • Tailstock quill diameter: 125 mm • Tailstock force: 7500 N • Hydraulic tank: 165 liters • Coolant tank: 300 liters Technical Specification Taper Size VDI 30 Counter Spindle Yes Driven Tools No

Condition: used, Year of construction: 2009, Technical details: Dcodpfew Dud Eex Adrsk turning diameter: 270 -300 mm turning length: 710 mm total power requirement: 43 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3,16 x 2,15 x 2,15 m The machine does not include a chuck or tools – the machine was originally purchased without these accessories. The G300 has X, Z, Y, C, SP, and driven tools. A bar feeder can be used, but the machine does not have one. *

Condition: good (used), Year of construction: 2007, functionality: fully functional, DMG DMU 50 3+2 axes SPINDLE overhauled 01/2026 Control system: Heidenhain iTNC 530 Hours: 11,275 program hours x-axis travel: 500 mm Djdpfsza T A Djx Adrock y-axis travel: 450 mm z-axis travel: 400 mm Control system: iTNC 530 Heidenhain Spindle speed range – main spindle: 20 – 10,000 rpm Tool holder: SK 40 DIN 69871 Table surface: 700 x 500 mm Max. table load: 500 kg T-slots: 7 x 14 x 63 mm Number of tool positions: 30 Max. tool weight: 6 kg Rapid traverse rate: 24 m/min Feed force: 4.5 kN Feed rate: 1 – 24,000 mm/min Total power consumption: 26 kVA Machine weight: approx. 4.5 t Space requirement: approx. 4.5 x 3.5 x 2.3 m Chip conveyor Handwheel Measuring probe Coolant gun Available immediately

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Manufacturer: INDEX Model: G300 CNC: Siemens Sub spindle lathe X-axis: 215 mm Y-axis: 180 mm Z-axis: 710 mm Turning diameter: Ø300 mm Chuck diameter: 250 mm Spindle nose: ISO 702/1 A8 Spindle speed: 4,000 rpm Spindle bore: Ø90 mm Motor power: 44 kW Tool turret: 12 positions Machine dimensions: 4350 x 2900 x 2700 mm Machine weight: 6550 kg. Dcodeypliujpfx Adrjk

Year of construction: 2005, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 200 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS SINUMERIK, overall weight: 8,000 kg, turning length: 800 mm, machine/vehicle number: 500571, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within either May 11–13, 2026, or May 18–21, 2026, without exception. Dcjdpfx Adoynhd Sjrek TECHNICAL DETAILS Travel X-axis: approx. 200 mm Travel Z-axis: approx. 500 mm Spindle bore: approx. 100 mm Turning length approx.: 800 mm MACHINE DETAILS Control: SIEMENS SINUMERIK Operating voltage: 400 V Rated current: 80 A Connected load: 47 kW Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 6,000 x 3,000 x 3,300 mm Weight: 8,000 kg EQUIPMENT Double turret with 12-position tool turret each Tailstock Main spindle Chip conveyor Two manuals BÜCHEL brand extraction filter Note: Machine can be transported on a standard truck. External reference: Pieper - Lot 50

Condition: excellent (used), MAZAK INTEGREX 400-3S is a CNC Turning-Milling-Drilling Center designed for precision, high accuracy and reliability. Capacities: distance between centres 1500 mm, swing 760 mm, max turning length 1524 mm, bar passage 102/77 mm, tool magazine 40 stations (Ø max 90 mm, L 400 mm). Main specs: main spindle A2-8 stepless 35–3300 t/min 30 kW 1200 Nm; back spindle A2-8 35–4000 t/min 26/22 kW 500 Nm; milling spindle CAPTO C6 15–12000 t/min 18.5 kW 120 Nm. Travels X630 Y±115 Z1585 mm; feeds 0–8000 mm/min; rapid X/Z 38 m/min Y26 m/min; weight ~13300 kg; footprint 5110x2196 mm; height 2798 mm. Equipment: coolant 444 l (15 bar through milling spindle), Forkhardt 3-jaw chucks Ø400/315 mm, linear scale for X, RS232, PCMCIA, spindle sync, chip conveyor, synchronized tapping, foot pedal. Enables tight tolerances; typical applications: automotive, aerospace, medical, machine tools, watchmaking. Dsdoyxn H Njpfx Adrsck

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 500522, spindle speed (max.): 3,500 rpm, overall weight: 6,500 kg, spindle diameter: 140 mm, counter spindle speed (max.): 3,500 rpm, TECHNICAL DETAILS Control: Siemens Sinumerik / Index C200-4D Main Spindle Spindle bore with collet clamping: 90 mm Dcjdpfexvq Rpox Adrek Spindle diameter at front bearing: 140 mm Spindle nose ISO 702/1 (Size): 8 Chuck diameter: 250/315 mm Max. rated turning diameter: 270 mm Max. swing diameter: 590 mm Speed: max. 3,500 rpm Counter Spindle Spindle bore with collet clamping: 90 mm Spindle diameter at front bearing: 140 mm Spindle nose ISO 702/1 (Size): 8 Chuck diameter: 250/315 mm Speed: max. 3,500 rpm Min. distance collet: 20 mm Rapid traverse: 22.5 m/min Turret Number of tools: 12 MACHINE DETAILS Dimensions & Weight Footprint: approx. 8/10.5 m² Height: 2,150 mm Machine weight approx.: 6.5 t EQUIPMENT Tailstock Automatic loading and unloading system

Condition: used, Year of construction: 1997, turning diameter 400 mm turning length 1250 mm control Siemens type 840 C swing diameter 590 mm turning speeds 3500 U/min Torque 275/178 Nm spindle passage 50/65 mm clamping chuck diameter 250 mm output 43/28 kw Tool changer 80 Pos. tool taper Capto C 4 Counter spindle 3500 rpm Flexible head 1500/6000 rpm (2 gear ratios) Head with 4 stations (2 fixed stations for turning/2 milling stations) Power 9.4 kW Travel 1250 mm Spindle head ISO 702/1 size 8 (HSP) size 6 (GSP) Djdpfx Adeyqvwfereck The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1976, functionality: fully functional, type of input current: AC, Machinge is in perfect working shape. It is very quick machine, pick-up was remanufactured. Selling due to retirement in the future. Dcodpfxenyiyaj Adrjk The remaining machines, complete equipment will also be for sale in the future. Three cnc machines, two forklifts, etc... Not all items are in the pictures because there is a limit of 15 photos. Contact for photos.