Multi-spindle machine

Index MS 22-6

Year of construction: 2024, condition: new, Universal testing machine H 5 TMNI (L) 250mm, extended Mechanical design: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free ball screws, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm 1 working area up to nominal load: Working area width: 420 mm Max. testing stroke without testing tools, adapters, and central measuring device: 1270 mm Max. testing area height (between lower fixed and moving crosshead) without testing tools, adapters, and central measuring device: 1325 mm Travel speeds: Testing speed 0.001 - 1200 mm/min up to nominal load Return speed 1200 mm/min Force measurement: Prodpfxsiq Hxvj Airsc Measuring range depending on the force measuring sensor used, 0.4 - 100% of the nominal load, Class 1 (optionally Class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/- 160,000 and +/- 900,000 digits. The machine is supplied with a factory test certificate. If a factory or DAkkS calibration is to be performed at the installation site upon customer request, this effort must be calculated separately. Crosshead travel measurement: Incremental square-wave input with encoder monitoring, storage of the crosshead position Resolution of the crosshead travel measurement:

Year of construction: 1999, condition: excellent (used), 600 KG 10 BAR Podpfjxy Ikbsx Airsrc

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 873 h, load capacity: 5,000 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: duplex, construction height: 2,450 mm, fork carriage width: 1,200 mm, fork length: 2,400 mm, empty load weight: 7,850 kg, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Load center: 600 Pjdpfxevgh U Re Airorc Mast type: Duplex Technical condition: good Front tire size: 300-15/8.00 Rear tire size: 7.00-12/5.00 Sideshift, 3rd valve, 4th valve, front working lights, heater, full cab, CE certificate, safety light,

Year of construction: 2004, condition: good (used), A used, well-maintained double miter cold circular sawing machine from KASTO, model: “KASTOdisc A10” - Fully automatic operation - Single cut - Hydraulic clamping cylinders - Central lubrication for saw guides - Coolant system - Documentation Saw blade diameter 350 mm Cutting range: Round 90°/45° 100/100 mm Square 90°/45° 100x100/100x100 mm Pjdpskfvhkjfx Airorc Rectangle 90°/45° 170x100/130x100 Shortest remaining piece length in single cut at 90°: 30 mm Shortest remaining piece length in automatic operation at 90°: 260 mm Working height 950 mm Dimensions (W x D x H) 1530x1348x1890 mm Weight 980 kg Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Condition: like new (used), Kitagawa MR200 rotary table for a MAZAK machine. Mitsubishi HG-H104T-D48 motor. New, unused condition. The table was never used and was intended to be installed in a Mazak machine. Prjdpfx Asy H Ewneiroc

Condition: ready for operation (used), Year of construction: 2008, A Fanuc CNC drilling and machining center is available. Travel X/Y/Z: 700mm/400mm/330mm, distance from table to spindle nose: 180mm-580mm, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, max. spindle speed: 10000rpm, spindle power: 26kW/5.5kW, torque: 35Nm/7.5Nm, feed rate: 30m/min, rapid traverse: 54m/min, tool stations: 21, tool interface: BBT30, positioning accuracy: 0.006mm, repeatability: 0.004mm, machine dimensions X/Y/Z: 2150mm/2050mm/2350mm, weight: approx. 2100kg, control: Fanuc 31i-B5, operating hours: approx. 9547h. Including chip conveyor and coolant tank. Documentation available. An on-site inspection is possible. Pedpozlt Snofx Airjrc

Condition: not inspected (used), Year of construction: 2014, operating hours: 43,965 h, functionality: fully functional, power: 30 kW (40.79 HP), volume flow: 351 m³/h, pressure (max.): 13 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Used Atlas Copco GA30VSD+FF compressor Integrated dryer Integrated frequency converter 30 kW 13 bar 5.85 m³/min Year of manufacture: 2014 Prsdpfx Aisxu Ibcjrsc Operating hours: 43965

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, CNC Spiral Bevel Gear Cutting Machine Gleason No 631 Year of manufacture: 2011 Prodpfx Aijw Tfb Serjc Control: SIEMENS 840d Retrofitted in 2011/2012 with new control, drives, etc. The machine was fully overhauled in 2011. A new control system and drives were installed.

Condition: good (used), Year of construction: 2016, Vertical machining center Machine type: DMG Mori Ecomill 1100 V Podpfozrm H Ssx Airsrc Control: Siemens 840 Dsl -Operate + Shopmill Year: 2016 SPECIFICATIONS Travel X-Axis: 1.100 mm Y-Axis: 560 mm Z-Axis: 510 mm Rapid motion: (X/Y/Z): 36 / 36 / 30 m/min. Spindle speeds: 12.000 rpm Spindle motor: 13 kW Torque: 82 Nm Tool: SK 40 Toolchanger Tool capacity: 24 Table size: 1.400 x 560 mm Max. Table Load: 1.000 kg Equipment Chip conveyor Cooling pumps Caliper Internal cooling: 17 Prod. Pack 1 bar

Condition: used, Year of construction: 2014, load capacity: 8,000 kg, lifting height: 4,470 mm, total length: 6,380 mm, Gas forklift Prsdpfexd Hmpjx Airec Linde H 80T/900/396 Drive Gas Year built 2014 Lifting height (mm) 4,470 Lifting weight (kg) 8,000