Screw compressor GA30VSD+FF

Atlas Copco GA30VSD+FF

Condition: excellent (used), Year of construction: 2006, MANUFACTURER: ATLAS COPCO MODEL: GA30VSDFF SERIAL NO.: API422341 YEAR: 2006 POWER (kW): 30 CAPACITY (m³/min): 4.58 Dsdpfx Afeyifb Ijpoun PRESSURE (bar): 12.80

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: Djdpfxshzbips Afpeun IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: excellent (used), Year of construction: 2016, MANUFACTURER: ATLAS COPCO MODEL: GA30VSDFF PLUS S/N: API830397 Duedpfx Afsyh Ugkjpen Year: 2016 Power (kW): 30 Output (m3/min): 5.84 Pressure (bar): 12.75 Operating hours (documented/total): Frequency inverter: yes Built-in dryer: yes, R410a 1.1kg

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 22 [kW] - Spindle speeds : 12.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 630 x 560 x 510 [mm] - Rapid traverses rates (X/Y/Z) : 40.000 [mm/min] A ROTARY AXIS - Travel : -125 / +10 [°] - Indexing precision : 0,001 [°] - Rapid traverse rate : 17 [rpm] - C ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0,001 [°] - Rapid traverse rate : 33 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 TABLE - Table dimensions : Ø300 [mm] - Maximum weight upon table : 200 [kg] - Max. turning diameter : 520 [mm] - Max. workpiece height : 350 [mm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 63 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.851 x 2.260 [mm] - Machine height : 2.950 [mm] - Machine weight : 9.450 [kg] MACHINE HOURS Duedpsxylwlofx Afpjn - Number of hours under power : 10875 [h] - Number of working hours : 2027 [h] EQUIPMENT - CNC : Fanuc G-Tech 31iB - Interactive programming : Manual guide - Interface : RJ45 / PCMCIA - Option : 5 axes Package - Spindle option : POWER UP - Hydraulic predisposition with 6 channels in the center of the table - Linear scales - 3 colors status lamp - Coolant tank * with high-pressure pump : 20 [bars] - Coolant through spindle - Chips conveyor : LNS - Tool probe : BLUM - Electric transformer

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, POLAR 78 X, year of manufacture 2007 - digital program automation - color touch monitor - chromed cutting table with air cushion - side tables with air cushion - light barriers - rear table cover Dedoycwdwspfx Afpjun - spare knife

Year of construction: 2012, condition: excellent (used), Agfa C95 washout station -good condition Dusdjirnmcopfx Afpen

Condition: used, 2 Color Offset Press Heidelberg MOZP-S with CP Tronic and Stream Feeder Duedpfeya Ihzex Afpen 2 Farben Offsetdruckmaschine / 2 Color Offset Press Heidelberg MOZP-S Year 1990 Size min. 280 x 280mm - max. 480 x 650mm Impressions 66 Mio. Dampening System AQUATRON CP Tronic Perfecting 1/1 - 2/0 Speed max. 8.000sh/h Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Luce 76 EM paper cutting machine Dsdpfx Asyftttefpoun

Year of construction: 1988, condition: good (used), A complete Atlas Copco air compressor including Donaldson Ultra Filter and a Tank in good working condition Dedshpx U Aspfx Afpjun

Condition: good (used), Year of construction: 2013, overall weight: 1,519 kg, power: 75 kW (101.97 HP), volume flow: 14.85 m³/h, pressure (max.): 12.8 bar, Air Compressor Atlas Copco GA75VSD FF Technical Data Dsdpfx Afoxk U Alspoun Manufacturer: Atlas Copco Airpower Model: GA75VSD FF Year of manufacture: 2013 Maximum pressure: 12.8 bar Free air delivery: 14.85 m³/min Motor power: 75 kW Motor speed: 3,000 rpm Weight: 1,519 kg Power supply: 400 V 50 Hz 3 phase Design: Oil-injected screw compressor Control: Electronic control panel Origin: Made in Belgium No liability is accepted for the correctness, completeness, or up-to-dateness of the information provided.