Jig

INGERSOLL Gantry 500

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 573251, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 730 mm, table length: 630 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Travel distances Travel distance X-axis: 525 mm Travel distance Y-axis: 400 mm Travel distance Z-axis: 450 mm Travel path for electrode change and loading position: 675 mm Traverse speed X, Y, Z: max. 2,000 mm/min Work table Support surface: 730 × 630 mm Load capacity: 1,000 kg T-slots: 5 Integrated C-axis Speed (adjustable): 1–20 rpm Measuring resolution: 0.001° Work tank Version: tank lift controlled Internal dimensions: 750 × 650 × 420 mm Ljdpfx Adjxniwrevehp Maximum dielectric fluid height: 375 mm Programmable/automatic: yes Work head Max. head load: 100 kg Distance from tool carrier plate to work table min./max.: 135/585 mm Dielectric fluid supply Filtration system: 4 cartridges (integrated) Filter area: 2 m² Total volume of dielectric fluid: 400 l MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 2,500 x 1,500 x 2,500 mm Weight: 4,400 kg Weight: 200 kg Electrical data Connected load: 25 kVA Fusing: 25 A Operating voltage/frequency: 400/50 V/Hz EQUIPMENT 20-position electrode changer Automatic central lubrication Pick-up disc magazine CO₂ fire extinguishing system according to DIN 14497 Compressor cooler

Year of construction: 1983, condition: good (used), machine/vehicle number: 2103, max. bore of chuck: 1 - 20 Ø mm Lhsdpfxodnfz Ne Advsp max. boring diameter: 20 mm mm cap washer diameter: 100 mm cap washer rotation: ca. 4500 Upm engine: 380 V, 0,25 kW space needed: 600 x 450 x 1380 mm

Condition: used, Year of construction: 2007, x-travel 550 mm y-travel 400 mm z-travel 400 mm Lhodsxiy A Uepfx Advop Control INGERSOLL ANDRONIC

Condition: used, Year of construction: 2011, Sinks (see attached images) Gantry Eagle 500 Year of manufacture: 2011 Travel paths: x/y/z = 525x400x450 Tool changer: 24 positions Weight: 5000 kg Lhodpfx Adsw D Hcgevjp

Condition: new, The KSM 13 Tool Grinder from KNUTH is a compact and efficient solution for precise and cost-effective grinding of double-edged twist drill bits within the Tool Grinders category. This handy device offers simple operation, allowing users, even without prior knowledge, to achieve clean and precise results quickly. The KSM 13 features a motor rating of 0.12 kW and accommodates grinding diameters from 3 to 13 mm, making it versatile for various drilling needs. With included grinding wheels and common collets, it simplifies the process of chamfering the relief angle and point angle while ensuring optimal chip removal during the grinding path. This robust tool is an ideal addition to any tool crib, enhancing your grinding capabilities. Don't miss out on improving your tool maintenance; request a quote or buy now to obtain this indispensable tool grinder. Ljdpfonh Nu Usx Advehp

Year of construction: 2004, condition: ready for operation (used), Control Unit Brand MITSUBISHI Model 64 bit CNC Movement X-Axis Movement 525 Y-Axis Movement 400 Z-Axis Movement 450 Lhsdpfx Adexbihqjvjp Workpiece Workpiece weight 1000 kg Table Outer length 730 mm Outer width 630 mm This 3-axis die-sinking EDM machine manufactured in 2004 features a Mitsubishi 64-bit CNC control system and a powerful 70 Ampere generator. It has a travel range of 525 x 400 x 450 mm and includes a 20-fold electrode changer. The work table measures 730 x 630 mm with a load capacity of 1000 kg. Consider the opportunity to buy this OPS INGERSOLL Gantry 500. Contact us for more information about this machine. Application Types EDM

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 750 mm, table length: 650 mm, TECHNICAL DETAILS Version: Lifting Tank Internal dimensions (W x D x H): 770 x 670 x 440 mm Programmable/automatic dielectric fluid height: max. 395 mm Work Table Support surface (W x D): 750 x 650 mm Load capacity: 1,000 kg Travel Paths X / Y / Z (within working tank): 525 x 400 x 450 mm Y (for electrode change and loading position): 675 mm Control System PC-NC dialogue: 2 x 32 bit Drive type: digital AC servo motors Max. traverse speed X, Y, Z: 5,000 mm/min High speed jump max.: 18,000 mm/min Min. distance between electrode clamping system and work table: 135 mm Max. distance between electrode clamping system and work table: 585 mm C-Axis Adjustable rotation speed: 1-20 rpm Measuring resolution: 0.001 degrees Load capacity for manual electrode change: 50 kg Load capacity for automatic electrode change: 15 kg Holding torque/clamping: Yes Max. electrode moment of inertia: 0.4 kgm² Lhsdpfxsw T Tg No Advep MACHINE DETAILS Dimensions (W x H x D) with generator: 2600 x 2680 x 2290 mm Space requirement with generator: 7.3 m² Machine weight: 4,360 kg Generator weight: 640 kg Connected load: 16 kVA Fuse protection: 32 A Supply voltage/frequency: 400 V / 50 Hz Operating hours: 2,001 h

Condition: excellent (used), Year of construction: 2010, Control: Siemens Sinumerik 840D Work Area Swing diameter over bed: 820 mm Swing diameter over cross slide: 520 mm Cross slide travel: 600 mm Tool Holder: Front: Capto size C6 – Multifix D1 Rear: Boring block with clamping claw Centre Distance: 3,000 mm Main Spindle Drive Power digital AC motor – 60% duty cycle: 46 kW Lhodpfx Adsxgdfbevep Number of gear stages: 2 (ZF planetary gearbox, electrically shifted, mounted outside the headstock) Headstock Spindle nose DIN 55027 / Bore (standard): 11 / Ø 132 mm Spindle diameter in front bearing: 190 mm Speed range (constant V): 1 – 1800 rpm Standard chuck sizes: Ø 315, Ø 400, Ø 500 mm Spindle nose DIN 55026 / Bore (option): A 11 / Ø 164 mm Spindle diameter in front bearing: 210 mm Speed range (constant V): 1–1600 rpm Cross Slide Transverse feed range: 0.001 – 1000 mm/min Longitudinal feed range: 0.001 – 2000 mm/min Thread pitches: 0.01–999.999 mm Rapid traverse transverse/longitudinal: 5/10 m/min At centre distance: 4,000 mm Transverse feed force: 16,000 N Longitudinal feed force: 22,000 N Turning tool section: 40 x 40 mm² Tailstock Quill diameter: 125 mm Quill travel: 280 mm Taper: 6 Mk Electrical Equipment Three-phase: 400 V, 50 Hz Design in accordance with VDE and EMC guidelines EN50081-2 / EN 50082-2 Interference suppression level A according to EN 50081-2 For TN-S or TN-C networks / industrial networks without RCD protection Dimensions Machine (L × W × H) = 2.88 m + centre distance × 2.55 m × 2.32 m Machine Weight (Centre distance / weight approx. kg) 3000 mm: 10,900 kg

Condition: used, Year of construction: 2012, An OPS-Ingersoll die-sinking EDM machine is available. Travel X/Y/Z: 525mm/400mm/450mm, C-axis: 360°, table dimensions X/Y: 750mm/650mm, max. workpiece weight: 1000kg, container dimensions X/Y/Z: 770mm/670mm/440mm, generator power (Eagle Powertec): 60A, electrode changer: 20-fold, high-speed jump: 18m/min, fine finishing generator: PT60, weight: approx. 5000kg, control: Eagle Powertec PC/NC 3060. 5000kg, control: Eagle Powertec PC/NC 3060, including compressor recooling unit, CO2 fire extinguishing system and pressure rinsing. Documentation available. On-site inspection is possible. Lodpfxowtrc Do Advehp

Condition: used, Year of construction: 1999, turning diameter 720 mm turning length 3.000 mm control FAGOR 8055 TC/B turning diameter over bed 470 mm spindle bore 92 mm spindle nose DIN-55027-11 Ledpfxswtr Duo Advshp spindle diameter 150 mm spindle drive 17 / 20,5 kW total power requirement 28 kW weight of the machine ca. 5,7 t