Standard-SZM

Iveco Stralis AS440S46T/P LNG 4x2 | 10+ pcs on stock

Condition: used, mileage: 8,45,000 km, power: 338 kW (459.55 HP), axle configuration: 4x2, color: white, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, power mirror, second fuel tank, soot filter, = Additional options and equipment = - 12-volt power socket - Remote central locking - Low noise level - Speed limiter - Centre armrest - Particulate filter - Radio - Reversing camera - Sun visor = Additional information = General Information Number of doors: 2 Technical Information Number of cylinders: 6 Engine capacity: 12,900 cc Fuel type: Natural gas Weights Unladen weight: 7,977 kg Payload: 11,023 kg Gross vehicle weight: 19,000 kg Max. towing capacity: 41,882 kg Interior Number of seats: 2 Condition Number of keys: 3 (2 remote controls) Iedpfx Aowc Ukcodweht

Condition: good (used), HURON MU4 milling machine Table surface 1450 x 460 5 x 16 mm T-slots Longitudinal travel 1300 mm Transverse travel 700 mm Vertical travel 500 mm SA40 spindle 27 spindle speeds 30 to 2,066 rpm Rapid traverse 2,800 mm/min Weight capacity 1500kg Max. head clearance 530 Iodpfx Adju Hifzowjht Spindle motor 8.8 Kw Feed motor 3.5 HP Cooling by electro-pump 1.6 HP Overall dimensions: L x W x H 2,000 x 2,000 Approximate weight 4 Tons

Condition: new, Variable-speed ISO 40, Motorized cross table on all axes. 3-axis viewer included. Base with chip tank. Refrigeration system. Led lamp. Mechanical speed indicator. Variable speed motorized axes with rapids. Rail lubrication system with manual pump. Milling capacity with insert cutter : mm 100. Milling capacity : mm 35. Drilling capacity on cast iron with pre-hole : mm 60. Max drilling capacity on steel with pre-hole (s235jr) : mm 24. Spindle taper : ISO40 DIN2080. Ihedpfeh Im H Sex Adwst Spindle sleeve : mm 86. Spindle stroke : 120 mm. Head inclination : +/- 45°. Vertical head rotation : +/- 90°. Head body rotation : +/- 180°. Vertical spindle speed : (2) 60 ÷ 500 |500 ÷ 3600 rpm. Motor : 400 V 50 Hz 2.25 kW. Distance between machine nose and table : 45 - 395 mm. Spindle-column axis distance : 215-450 mm. Table size : 1246 x 230 mm. Longitudinal table displacement : 850 mm. Transverse table displacement : 310 mm. Maximum load capacity : 400 kg. Dimensions : 1680 x 1500 x 2100 h mm. Net weight : 1000 kg.

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 1,050 mm, feed length Y-axis: 360 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,050 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, Equipment: documentation/manual, Tiger FO 135 universal milling machine Description of the machine The machine was purchased new in 1994 and has only been in operation for a few hours. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition. good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a digital readout for the 3 axes, which makes it possible to work with cutter compensation and recurring measurement machining. Operating instructions are included with both the machine and the digital indicator. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic traverse path: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis 35 ÷ 1,550 rpm, 12 speeds Iedpfjrqwbiex Adwsht - Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ Direct current motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast feed ➢ Lengthwise and crosswise 3,000 mm/min Vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low-voltage electrical controls on the pushbutton panel of the side arm - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Machine dimensions (for transportation) ➢ Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accessories - Counter supports for cutting shaft - Cutting shaft ø32 mm Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully functional. Axis movements are smooth and the guides are in good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a DRO for the 3 axes, which offers the possibility of working with milling compensation and recurring measurement processing. Both the machine and the DRO come with operating instructions. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic travel: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed services: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast forward ➢ Longitudinal and transverse 3,000 mm/min ➢ vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low voltage electrical controls on side arm push button panel - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Dimensions of the machine (for transport) Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accesories - Counter supports for cutting shaft - Cutting shaft ø32 mm

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 438 mm, spindle bore: 85 mm, turning diameter over bed slide: 660 mm, center height: 330 mm, turning length: 1,500 mm, quill stroke: 165 mm, quill diameter: 85 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 15 rpm, bed width: 400 mm, quill mount: MK 5, Equipment: rotational speed infinitely variable, Tip height: 330 mm Center distance: 1500 mm Spindle bore: 85 mm Ihodpfx Aem E Umiedwjt Spindle nose according to DIN 55029: Camlock D8 Gear stages: 12 Spindle speed range: 15-1500 rpm Drive power: 11 kW Weight approx. 2135 kg Features and more: Each gear stage is infinitely variable from 50% to 100% Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: used, Type 3M Long stroke 1000mm Transverse stroke 420mm Vertical stroke 710mm SA45 spindle Isdpevmm Ipsfx Adwjht Table 1520 x 385 Speeds 25 to 2000rpm Weight 3800Kg

Condition: used, Technical details: welding current - continuous: 320 A protection class: IP21 total power requirement: 17 kVA kVA Ihedpfxou Nwaxj Adwst weight of the machine approx.: 132 kg dimensions of machine: 1,3 x 0,6 x 0,9 m TIG with 2-stroke; 4-stroke; spot welding and pulse welding Switching from 2-stroke to 4-stroke Cooling mode AF New components like: -hose package 4.0 meter, water cooled -mass tongs and mass cable 4.0 meters -pressure reducer *

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Iedpfxsvbqlhs Adweht Available in stock subject to prior sale. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Center height 385 mm Max. diameter over bed 770 mm Max. diameter over carriage 575 mm Max. diameter over pocket 1050 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1550 x 1700 mm Net weight 3250 Kg Gross weight 3250.00 kg Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: used, Year of construction: 1999, functionality: unexamined, travel distance X-axis: 1,400 mm, travel distance Y-axis: 630 mm, spindle speed (max.): 2,800 rpm, very robust machine – table load capacity up to 1200 kg table size 1800 x 630 mm speed range 56 – 2800 rpm, tool holder ISO 50 Ihodpfxew Nvyqe Adwjt travel X / Y / Z 1400 / 630 / 500 mm feed range X, Y 10 – 2000 (Z 2.5 – 500) mm/min, stepless main motor 15 kW, connected load approx. 20 kW includes: universal milling head IUG 32A, swiveling 360° horizontal milling spindle rapid traverse, cycle automation digital display Heidenhain ND 750 coolant system work area enclosure hydraulic tool clamping CE Declaration of Conformity

Condition: excellent (used), Year of construction: 2015, operating hours: 14,094 h, functionality: fully functional, machine/vehicle number: UT 0609, travel distance X-axis: 1,520 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 24, No reserve price - guaranteed sale at the highest bid! Submitting a bid obliges you to pick up the item on time by March 31, 2025! 5-axis universal machining center with integrated 2-axis CNC rotary/tilting table TECHNICAL DETAILS Machine type Control: Heidenhain TNC 620 Travel path X: 1,520 mm Iodpev Iazxjfx Adwoht Travel path Y: 520 mm Travel path Z: 460 mm Rapid traverse: 48 m/min Table Turning diameter: Ø 650 mm (removable to 500 mm) Table load: max. 500 kg Swivel range: -5° to +110° Milling spindle Speed: up to 12,000 rpm Drive power: 19 kW Torque: 121 Nm (10% duty cycle) Tool change Capacity: 24 tools (double arm changer) Tool size: ISO 40 according to DIN 69871A MACHINE DETAILS Control switch-on time: 31,943 h Machine switch-on time: 23,443 h Spindle running time: 14,094 h Coolant Tank capacity: 200 liters Centrifugal pump: 83 l/min at 8 bar EQUIPMENT - Additional rigid table on the left in the work area - Full splash guard cover - Work area light - Hydraulic and heat compensation - Direct measuring systems for all axes - Preparation for high-pressure flushing - Chip conveyor - Manuals on CD-ROM - Laser probe U-series - Calibration burr with SK 40 tool holder - Preparation interface for Blum infrared measuring probe - Workpiece measuring probe for milling machine - SK40 pull stud - Software additional equipment: Touch system function Automatic kinematic measurement using touch system cycles Swivelling of the processing level and reundtuisch processing