Wheel loader

JCB 406 t4 * RADLADER * 4x4 * TOPZUSTAND

Condition: new, functionality: fully functional, Year of construction: 2025, * New machine * Kubota engine 18.2 kW * Operating weight 2,100 kg * Lifting capacity 2,260 kg * Tyres 27x10.50-15 SKID (machine width 116 cm) * 1st auxiliary circuit (DW) proportional on joystick incl. continuous operation * ROPS cab including heating/2 mirrors/2x halogen work lights front & rear/radio – mechanically suspended, adjustable comfort seat with seat belt + armrest * StVZO package up to 20 km/h * Road lighting (halogen) Hodpfjw Hxtiox Ag Nji * Mudguard extensions * Rear counterweight plate (90 kg) incl. shunting coupling * Standard bucket 1,200 mm wide and pallet forks 1,000 mm

Condition: used, functionality: not functional, Year of construction: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the tailgate of the vehicles, which enabled the military to transport a truck or other military equipment. The XV in LARC denotes the maximum payload: 15 tons. The vehicles are made of aluminum and have the following (precise) dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height. (American measurements: 45 ft x 15 ft x 14 ft). The original LARC vehicles were equipped with two Cummins 8-cylinder diesel engines, each delivering 300 HP. On land, the vehicles could reach a maximum speed of 48 km/h and, on water, 9.5 knots, which is approximately 18 km/h. The unladen weight of the vehicle is 22 tons. The maximum permissible weight was 35.5 tons. The previous owner intended to convert the boats to fully electric drive in order to subsequently organize tours on the Wadden Sea. Around €200,000 was invested, but the project was not completed. The diesel engines have been removed and are no longer available. Battery packs are present and partially installed. Hjdpfxexcgy Ho Ag Nji The exact remaining work required is not known.

Condition: used, Year of construction: 2017, operating hours: 1,308 h, power: 27 kW (36.71 HP), Equipment: all wheel drive, cabin, * Front hydraulics Hedjxnvgaopfx Ag Nsi * All-wheel drive * Turf tires * 1308 operating hours ----Internal vehicle number 10178-----Subject to errors and prior sale WhatsApp support available! If you have any questions about the vehicle or need more information, feel free to contact us via WhatsApp Whatsapp Whatsapp

Condition: new, Year of construction: 2026, The ZX7045 B1 DRO milling/drilling machine is an advanced tool created for precision metalworking. It is ideal for drilling, reaming, expanding holes up to 45/40 mm in cast iron, as well as threading screws up to M12 mm. With the ability to mill up to 80 mm wide, notch up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version is distinguished by its auto-feed of the spindle, which increases work efficiency. In addition, it is equipped with a digital readout, which increases the precision of operations, and a cooling system, taking care to maintain the optimum temperature during machining. This tool is ready to use right away, available from stock. Ideal for professionals who demand high quality and performance in metalworking. Product features HEAVY, STABLE CAST IRON AUTOMATIC SPINDLE FEED HEIGHT OF THE MILLING MACHINE IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN ADDITIONAL LIQUID COOLING SOLID CROSS TABLE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES, QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION HEAD ROTATABLE +/- 900 ADJUSTABLE HEAD HEIGHT DIGITAL READOUT Base available as an optional extra TECHNICAL DATA Drilling capacity in steel 32 mm Drilling capacity in cast iron 45 mm FACE MACHINE DIAMOND 80 mm HANDS CAPACITY 28 mm SPEED RPM 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm. (6/12) MANDREL HANDLE MT 4 Spindle feed 125 mm (AUTOMATIC FEEDING) DIMENSIONS OF THE WORKING TABLE 820 mm x 240 mm DIMENSIONS OF BASE 580 x 600 mm MAX. Spindle distance from the table 445 mm Spindle distance from column surface 260 mm AXIS MOVEMENT X/Y/Z 515/175/430 mm PINOLLE SPEED 0.12; 0.18; 0.25 mm/rev. 90° CLOCKWISE/LEFT HAND ROTATION MOTOR POWER 1,8 kW 2,5 hp POWER SUPPLY 400 V weight 350 kg Available accessories drill chuck shank MK4/B18 digital readout handy tools drill chuck 3-16 mm/B18 Hodpfxoud H H Uj Ag Nji reduction sleeve MK4/MK3 reduction sleeve MK3/MK2 English language user manual

Condition: used, operating hours: 3,329 h, power: 11 kW (14.96 HP), gearing type: mechanical, fuel type: diesel, first registration: 07/1995, color: red, overall weight: 1,700 kg, mileage: 3,329 km, suspension: other, , diesel year of construction 1995 3,329 operating hours according to speedometer 11 kW 3rd circuit hydrostat crocodile bit bucket fully functional permissible total weight 1,700 kg FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION IS DECISIVE, THE PRICE TAKES SECOND PLACE If you have any further questions, please do not hesitate to contact Mr. Faller on the number. //*EXCHANGE, DEPOSIT OR RENTAL OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You can find further offers on our homepage: The description and data given do not constitute a guarantee and are not binding. The contract of sale concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Hodpfxsvida Io Ag Noi

Condition: new, functionality: fully functional, mileage: 1 km, power: 5 kW (6.80 HP), color: grey, overall weight: 2,150 kg, operation weight: 2,150 kg, lifting power: 1,000 kg/m, lifting height: 3,120 mm, tire size: 29*12.5-15, emission class: none, digging bucket width: 1,200 mm, Year of construction: 2025, operating hours: 1 h, Equipment: air conditioning, all wheel drive, cabin, hydraulics, low noise, pallet forks, standard shovel, trailer coupling, Motor: YQP5.72AF.48P Engine power: 5000 watts Hjdpfx Aovcl T Neg Nsi Battery: 72v 200Ah Standard tire size: 29*12.5-15 Drive: 4-matic Additional Functions: 1 Lifting capacity: 1000 kg Net weight: 2150 kg Speed: 12 Km/h Hydraulic flow: 27 L/min Working pressure: 160 bar

Condition: used, Year of construction: 2023, operating hours: 2,100 h, power: 37 kW (50.31 HP), maximum speed: 20 km/h, Operating hours: 2100_____with ROPS driver protection canopyKubota diesel engine D1803-CR-T37 kW = 50 hpRear counterweight – end plateHigh-speed gear 20 km/hHydraulic tool lockingRetention systemSpecial equipmentRear chassis with widened fendersCase weight 100 kgTyres 15.0/55-17 AS, 6-hole, ET -45Reinforced gear pump 19 ccm (37 kW engine required)LED work light kit, 800 lumens (2 front, 1 rear)Pickup frame Euro-WSHydraulic lockingTow device with bolt and lashing eyesLocation: Oberlauch Hjdpfx Aexmrvueg Nsi

Condition: new, Year of construction: 2025, operating hours: 1 h, power: 16 kW (21.75 HP), Schäffer 1622 New machine - Year of manufacture 2025 Technical data: Operating weight with ROPS canopy and standard equipment: 1,250 kg Tipping load, straight, according to ISO 8313: 600 kg Lifting capacity: 810 kg Height with ROPS canopy: 1,990 mm Equipment: ROPS operator protection canopy Kubota diesel engine D902, 16 kW / 22 HP Restraint system Additional equipment: First Edition package Pressureless return Hsdpjx R N Swsfx Ag Nei Mechanical detent on auxiliary control valve Towing device Automotive control Lighting system pre-installation Special paint finish RAL 9005 - deep black Standard tyres 23x8.5-12 AS, ET60 Hydraulic quick coupler SWH mounting frame Optional: Mini earth bucket with hydraulic grab, 0.90 m wide | Internal no.: 11347202

Condition: used, mileage: 15,634 km, power: 229 kW (311.35 HP), gearing type: mechanical, fuel type: diesel, color: yellow, overall weight: 23,200 kg, empty load weight: 23,200 kg, maximum load weight: 15,000 kg, axle configuration: 4x4, number of seats: 1, first registration: 03/2016, brakes: engine braking, Year of construction: 2016, operating hours: 15,634 h, driver cabin: day cab, Equipment: additional headlights, air conditioning, all wheel drive, cabin, compressed air brake, differential lock, head guard, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, standard shovel, * German vehicle * Wheel loader test according to §14 completely available * Condition, see photos * original ONLY 15,634 BH * Driver's cab rollover protection ROPS / stone chip protection FOPS * ROPS/FOPS meet the requirements of the standards ISO 3471:2008 and ISO 3449:2005 Level II * Turning circle (diameter) (counterweight) 6,804 mm * Small turning circle due to articulated steering * Fuel tank 302 liters Hodpfx Agsvzav Nj Nsi * Axles, front axle with manually operated differential lock, rear axle with open differential * Brakes, fully hydraulically encapsulated oil bath disc brakes with integral braking system (IBS) * Planetary powershift transmission (4V/4R), automatic * Detect technologies: rear view camera Cat rear object detection * Immobilizer * Air conditioning, heating and defroster (automatic temperature control and fan control) * Driver's cab with pressurized ventilation and sound insulation (ROPS/FOPS) * Electro-hydraulic control levers, single-axle lever for lifting and tilting function * Electro-hydraulic parking brake * Ergonomic ladders and handrails for cabin access * Warning horn, electric * External rear-view mirror with integrated blind spot mirrors * Multifunctional 18 cm color touchscreen display for image display of the rear view camera, time and machine parameters * Radio including antenna, loudspeaker * Seat with fabric cover, air-suspended * Steering joystick, electro-hydraulic, speed-dependent with force feedback * Sliding window (left and right) * Reverse warning signal * Fender, sheet steel, front with mud flap and rear with extension * Engine hood (plastic) with electric tilting device * Sight glasses: engine coolant, hydraulic oil and transmission oil level * Working hydraulic pump type adjustable piston * ? Maximum travel speed of the standard machine with empty bucket and standard tires (L3) with a rolling radius of 826 mm. * Speed with gears: Forward 1 6.5 km/h Forward 2 13.0 km/h Forward 3 23.5 km/h Forward 4 39.5 km/h Reverse 1 7.1 km/h Reverse 2 14.4 km/h Reverse 3 25.9 km/h Reverse 4 39.5 km/h * Operating weight 23,220 kg If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 18 h, Powerful mini dumper in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 17h Year of manufacture: 2024 SCHORR tracked dumper RR500DHKAS PRO – Discover the advantages: - 9.2 HP four-stroke engine - Self-propelled and powerful chain drive - Hydraulic bucket for self-loading - 500 kg payload - Large and high-quality tipping trough with a wide tipping angle - Foldable rider platform as standard - 6+2 gears The SCHORR tracked dumper RR500DHKAS features a hydraulic tipping drive and a payload of 500 kg, as well as a powerful 9.2 HP single-cylinder 4-stroke gasoline engine. The special feature of the RR500DHKAS is its hydraulically controlled bucket. With the help of the so-called "self-loader," you no longer need a separate shovel. Thanks to its slim design (740 mm), the mini dumper can even drive through narrow paths and narrow doorways. The mini dumper's powerful track drive allows you to easily negotiate rough terrain, inclines, and curbs. The rubber tracks provide secure footing in any work area. Raising and lowering the dumper/box is effortless and requires little effort thanks to the hydraulic tipping drive, even when fully loaded. Another advantage of the wheelbarrow is its extra-large hydraulic oil tank with oil filter. With a robust dumper made of thick sheet metal and a straight outlet that ensures quick and easy drainage, this dumper is a must-have for anyone who needs to transport heavy loads. Tipping on slight inclines is also no problem. The large tipping angle ensures that even fully loaded dumpers are completely emptied without you having to manually assist. TECHNICAL DATA: - Manufacturer: SCHORR - Manufacturer's type designation: RR500 - Model: DHKAS - Load capacity: 500 kg - Tilt drive: Hydraulic (infinitely variable) - Drive: Chain - Weight without/with packaging: 353 / 373 kg Drive - Engine: Air-cooled single-cylinder four-stroke engine (OHV) - Starter: Recoil starter - Power: 9.2 hp - Transmission: 6 forward gears / 2 reverse gears - Speed - Forward gear: max. 8 km/h - Reverse gear: max. 5 km/h Basic dimensions: - Total length of platform folded: 2350 mm - Total length of platform unfolded: 2550 mm - Total width (including bucket): 740 mm - Total height: 1050 mm - Container dimensions (internal dimensions): 740 x 665 x 435mm - Container dimensions (external dimensions): 1060 x 710 x 520mm - Track width: 710mm - Loading volume (liquid): ~ 200L - Loading volume (heaped): up to 370L (depending on load) - Drive chain dimensions: 180 x 60 x 38mm - Packaging dimensions: 1890 x 870 x 1220mm Filling height: - Side: 810mm - Front: 580mm PROFESSIONAL DUMPER WITH BUCKET The mini dumper relieves you of the arduous burden of having to move heavy wheelbarrows by hand. The attached, hydraulically controlled bucket also helps with this. SMOOTH-RUNNING AND ROBUST Hedpfx Agewh I Sdo Nsi The mini dumper features a robust 6-speed transmission with two reverse gears. The dumper also features four eyelets for secure attachment during transport. We at SCHORR are happy to answer any questions you may have about our pallet trucks. You can reach our competent team by phone or email. We look forward to hearing from you and providing advice.