Scissor lift

JLG 4069LE hoogwerker schaarhoogwerker (2005)

Condition: good (used), Year of construction: 1992, Offer 23426 Technical Data: - Cutting range at 90° round 420 mm - flat 635 x 290 mm - Cutting range at 45° round 360 mm - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Infinitely variable cutting speeds 18 to 108 m/min - Hydraulic lifting and lowering of the saw frame - Hydraulic material vise - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device - Machine mounted on bogie - Feeding roller table motor-driven 4000 mm - Discharge roller table with length stop 6000 mm Nodpfx Abjrl Irvj Usdb - Required space approx. W 2500 x H 1400 x D 1100 mm - Machine weight approx. 950 kg - Roller table weight 2000 kg

Condition: refurbished (used), Year of construction: 2022, operating hours: 1,518 h, functionality: fully functional, power: 260 kW (353.50 HP), year of last overhaul: 2026, Basic Inventhor 6 package: Load-Sensing System Fuel tank, 500 liters Longitudinal belt: belt length 2,900 mm, belt width 800 mm centrally arranged lubrication strips 24V electrical control system - additional electric pump for operating the following functions when the engine is stopped: raise/lower/tilt rear belt, open/close comb flap, open/close comb, raise/lower folding chute complete radio remote control large side GRP maintenance doors easy-to-maintain engine compartment LED lighting package: engine compartment and rear hydraulically reversible fan wheel Ndodjxx N Dgspfx Ab Uob three-sided loading protection folding chute fire extinguisher maintenance ladder toolbox acoustic start-up warning Doppstadt telematics system paint: RAL2011 traffic orange Additional equipment: Drive train 260 kW - EV 2-axle semi-trailer chassis Shredding system Size L - 20 teeth Additional hydraulic connection 35 - 80 l/min Hydraulic drive Rear belt 7 m Over-belt magnet, neodymium Frame for over-belt magnet, 7 m Delivery date will be agreed upon.

Condition: excellent (used), functionality: fully functional, power: 29.42 kW (40.00 HP), overall weight: 1,200 kg, fuel type: diesel, Year of construction: 2013, operating hours: 1,127 h, MC Connel Robocut / Energreen Robogreen Radio-controlled mowing crawler / large-area mower / embankment mower Technical information according to manufacturer: - 40 HP 3-cylinder Isuzu diesel engine - 2-stage hydrostatic drive (0–4 and 0–7 km/h) - Emergency stop - Slope capability up to 55 degrees Nedpfx Aew A Nn Ajb Ujdb - Hydraulic output for mowing rotor (L/min): 50 - Working pressure (bar): 200–350 - Autec model control system - Machine weight incl. attachment (kg): 1040 Attachment: HEAD-130 - Flail mower rotor with 1.30 m working width including floating position, fitted with Y-blades - Mowing rotor weight (kg): 160 - Flail rotor speed (rpm): 3000 This Energreen Robocut was manufactured in 2013 and, according to the meter, has 1,127 operating hours. It is in very good overall condition, showing the typical signs of use and wear for this class of machine. Recently serviced with major maintenance and extensive overhaul. Sale as a used machine, excluding return, warranty, and guarantee. Net price: €32,500 // Gross price: €38,675 - Viewing and test drive possible by arrangement - Nationwide shipping can be organized; costs depend on distance - Financing and leasing can be arranged individually

Condition: ready for operation (used), Year of construction: 2014, A single-girder gantry crane newly built and converted in 2014 by Teichmann is available. Load capacity: 5000kg, track center distance: 6000mm, lifting height: 6000mm, crane travel length: 3000mm, trolley: monorail underhung trolley, hoisting speed: 5m/min, trolley travel speed: 20m/min, crane travel speed: 20m/min. Documentation available. An on-site inspection is possible. Ndjdpfx Asyv H Igeb Usb

Year of construction: 2026, condition: new, Oscillating screen ASM series Nedoin Ey Sjpfx Ab Ujdb S&F oscillating screens and horizontal screens are used in many areas of the wood processing industry (sawmills, pelleting plants). Screening machines of the "ASM" series screen wood chips, wood pellets, sawdust and sawdust, waste wood, biomass and many other sawmill by-products in dry and wet applications. The material-protecting, horizontal-circular screening movement of the inclined screen box ensures a high separation efficiency of the vibrating screen. One advantage of the screening machine is that long and fibrous particles glide diagonally to tangentially over the screening surface. This means that - in contrast to throw screens - no jamming or plugging grain occurs. Further advantages are the robust design, the high screening capacity and the long, low-maintenance running time of the screening machine. In addition to standard dimensions, the company also supplies the "ASM" series as a "customising solution" in a split design for existing plants. This makes it possible to use new screening machines in cramped and difficult-to-access spaces in existing plants or sawmills. Screening machines of the "ASM" series offer screen sizes from 0.5 to 15 m² (per screen deck) and are characterised by a high screening capacity (up to 350 m³/h - depending on the material). At a glance: - Ideal for: Wood chips, pellets, sawdust, biomass, bark, waste wood, substitute fuel. - Areas of application: Wood industry, recycling and waste disposal, animal feed - Screening area: 0.5 - 15 m² (30 m² as double deck) - Screening capacity (depending on material): up to 350 m³/h - Separation size: 0.1 - 150 mm (depending on size) - Drive power: 0.55 - 15.0 kW (depending on size) Advantages: - High screening capacity - High separation efficiency - No jamming and plugging - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device Nodpfxehik Ezs Ab Uedb - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: new, cutting diameter 235 mm dimensions of saw-band 2645 x 27 x 0,9 mm cutting width 280 x 190 mm cutting speed 45/90 m/min 120 mm 120 mm 190 mm Impact energy 170 mm connected load frequency 400 Volt total power requirement 1,1 kW weight of the machine ca. 290 Kg dimensions 1,2 x 0,8 x 1,2 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control Nsdpfop Scqyjx Ab Uedb -Electr. Automatic cooling

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, used automatic edging line Möhringer Autojet Nedpfx Abew Tkt He Uodb S-singulator, infeed roller conveyor, through-feed cross-cutting automatic measuring table with infeed edging saw with double-lamella chip separator driven roller conveyor with pull-off device control system and electrical cabinet

Condition: new, Year of construction: 2026, Genie GS4655 E-Drive scissor lift, new, used, demonstration machines available Ndjdpfx Aberhktpe Usb

Year of construction: 2005, condition: excellent (used), The subject of the auction is the sawmill line BRODPOL The line consists of a log prefeeder plus a cascade, an input feeder, a BRODPOL TT5/500/320/G circular sawmill with a centering device and a receiver, and a distribution table. - diameter of the processed log 100 - 320 mm - length of processed log 1250 mm - 6000 mm - diameter of circular saws (only) 500 mm - maximum number of saws on the spindle 5 pcs. - feed speed 10 - 28 m/min. - power of main motors 55 kW + 75 kW Njdpjl H Hy Hofx Ab Uodb Hcwgak9s - required connection of pneumatic supply 6 atm. - capacity up to 20 m³ per hour of operation