Crane

JMG MC 25S

Condition: like new (used), functionality: fully functional, power: 4 kW (5.44 HP), fuel type: electric, color: silver, overall weight: 2,460 kg, mast type: telescopic, Year of construction: 2022, operating hours: 21 h, machine/vehicle number: 0943, Small, compact, and maneuverable: these are the key advantages of our 2.5-ton electric mobile crane. However, there is no doubt that it is capable of handling “big” tasks, as the crane delivers full performance with a maximum lifting capacity of 2,500 kilograms. The 2.5-ton electric mobile crane comes standard with non-marking tires that do not leave chalk residues. The crane's 2 kW electric motor offers precise control and, thanks to a powerful 24 V, 420 Ah battery, can operate for up to 8 hours without needing to be recharged. The telescopic boom extends proportionally and can be further extended with a jib on request. JMG MC 25S - Capacity 2,500 kg - Net weight 2,460 kg - Width 900 mm - Height 1,600 mm - Drive Electric - Power output 4 kW Csdpfx Asw S Ii Neptohb - Tires Solideal Magnum - Hydraulic winch - Telescopic boom - Counterweights - Battery 24 V 420 Ah - Automatic braking system - Front-wheel drive - 2 gear stages - Radio remote control - Manual boom extension - Electronic load monitoring - Boom angle +60° / -15° - Ground clearance 70 mm - Tires - front 18 x 7-8 - Tires - rear 15 x 4.5-8 - Operating manual - Electric motors - Insulation class H

Condition: good (used), loading space length: 7,820 mm, loading space width: 1,840 mm, loading space height: 2,140 mm, color: red, Year of construction: 2016, General information Field of application: Construction Weights Empty weight: 1.975 kg Chedpfxjzc Ua Ao Aptjb Functional Lifting capacity: 200 kg Lift height: 1.600 cm Working height: 1.800 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Remanufactured: Yes Delivery terms: EXW Max. horizontal reach: 1130 m Max swing of arm in degrees: 90 Max swing of platform in degrees: 999 Latest inspection: 2026-06-10 Production country: DE Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information

Condition: used, total length: 2,910 mm, Year of construction: 2023, load capacity: 2,500 kg, - Reifen: Solideal, Vollgummi grau, Typ Magnum - Reifengröße: vorne 18x7-8, hinten 15x4,5-8 - Radstand: 1635 mm - Bodenfreiheit Mitte: 70 - Proportional ausfahrbarer Ausleger - Vorderachse Antrieb mit gegenläufiger Bewegung - Mobile Kopf ( -70°/-35°/0°/+10°) - Struktur für Windflaschen und Haken an Bord - Maximale Tragkraft 2500kg - Vorderradantrieb Nr. 2 Elektromotor AC 2 kW 24V. Isolationsklasse H - Abnehmbare Kontergewichte Kg. 750 - Batterie 24 V - 420 Ah 8 Arbeitsstunden - Antriebsräder: Vorne: Nr.2 superelastich 18x7-8” Hinten: Nr.2 superelastich 15x4 1/2-8” Chodoztgfwepfx Aptob - Lenkung: über die Hinterachse Lenkwinkel -90°/+90° - LMI - Elektronische Lastbegrenzung - Automatisches Bremssystem an allen Rädern - Auslegerwinkel +65°/-15° - Elektromotor 3 kW - 24 V AC, Isolationsklasse - Hergestellt aus vorgefertigten und verschweißten Stahlplatten - Gemeinschaftsrichtlinien 2006/42/CE- 2000/14/CE -2014/30 UE 2014/35/UE - D.Lgs 262/2002 und nachfolgende Änderungen

Condition: new, functionality: fully functional, fuel type: electric, overall weight: 2,500 kg, maximum load weight: 2,500 kg, mast type: telescopic, Samojezdny żuraw akumulatorowy renomowanej włoskiej firmy JMG, model MC25S ze sterowaniem radiowym o udźwigu 2 500 kg. Urządzenie nowe, gotowe do oglądnięcia. Dystrybutor, gwarancja 12 miesięcy. KLASYFIKACJA ŻURAWIA ZGODNIE Z NORMĄ UNI ISO 4301-1: A3 DYREKTYWY EUROPEJSKIE: 2006/42/WE (Dyrektywa maszynowa) 2004/108/WE (EMC) 2006/95/WE (Dyrektywa niskonapięciowa) 2000/14/WE i kolejne zmiany. NORMY ODNIESIENIA: EN 13000:2010 UNI ISO 4301-2:2011 i kolejne zmiany. NAPĘD KÓŁ: Elektryczny NAPĘD WYSIĘGNIKA: Hydrauliczny ZASILANIE: Akumulator elektryczny MAKSYMALNY UDŹWIG: 2 500 kg MASA ŻURAWIA: 2 500 kg KAT NACHYLENIA WYSIĘGNIKA W GÓRĘ: 60 ° KAT NACHYLENIA WYSIĘGNIKA W DÓŁ: -15 ° RAMA: Zaprojektowana i wykonana przez firmę JMG. Ma budowę skrzynkową i odporną na skręcanie konstrukcję ze stali konstrukcyjnej o wysokiej wytrzymałości WYSIĘGNIK: Wykonany z wysokiej jakości blachy stalowej, formowanej i spawanej. Składa się z jednostki podstawowej, hydraulicznego układu teleskopowego i jednego przedłużenia mechanicznego. Odchylanie i wydłużanie jest realizowane hydraulicznie za pomocą siłowników teleskopowych SILNIK JEZDNY: 2 silniki elektryczne 2 kW, 24 V AC, klasa izolacji H SILNIK POMPY: Silnik elektryczny 3 kW, 24 V DC, klasa izolacji H NAPĘD: Elektroniczne sterowanie prędkością, typ MOSFET AKUMULATOR: 24 V 420 Ah, ze wskaźnikiem ładowania PRZENIESIENIE NAPĘDU: Przednia oś napędzana przez 2 przekładnie zębate KOŁA: Przód: superelastyczne, 18x7-8", 2 szt. Tył: superelastyczne, 15x4 1/2 -8", 2 szt. HAMULCE: Automatyczne na kołach przednich SKRĘCANIE: Skręcanie na tylnych kołach za pomocą silnika elektrycznego. Maks. kąt skrętu ± 90° STEROWANIE: Obsługa za pomocą radiowego pilota zdalnego sterowania UKŁAD HYDRAULICZNY: Zasilany wyciszoną pompą zębatą 3 kW. Siłowniki sterowane przez rozdzielacz elektro-proporcjonalny z radiowym pilotem zdalnego sterowania. Filtr i zawór bezpieczeństwa. Ciśnienie robocze maks. 22 MPa. ZABEZPIECZENIA: Elektroniczny wskaźnik i ogranicznik momentu obciążenia WYPOSAŻENIE STANDARDOWE ŻURAWIA: Chjdpfx Apewtppzjtjb • Udźwig maksymalny 2,5 t • Napęd na przednie koła poprzez 2 reduktory (po jednym na koło) • Wysięgnik teleskopowy hydrauliczny rozsuwany (1 sekcja stała, 2 sekcje teleskopowane) • Ręczne przedłużenie mechaniczne wysięgnika • Bateria akumulatorów 24 V 420 Ah • Stacjonarna ładowarka akumulatorów • Oświetlenie robocze • Oświetlenie ostrzegawcze • Gaśnica • Sterowanie radiowe wysięgnika i kół jezdnych • Elektroniczny wskaźnik i ogranicznik obciążenia zgodny z normami CE • Kąt wychylenia wysięgnika +60° / -15° • Deklaracja zgodności z normami CE • Instrukcja obsługi, dokumentacja techniczna, deklaracje ZAMONTOWANE WYPOSAŻENIE OPCJONALNE: • Wciągarka hydrauliczna 2,5 t • Opony nierysujące • System uzupełniania wody w akumulatorach • Ładowarka mobilna zamontowana w pojeździe • Manualny 3 pozycyjny wysięgnik bocianowy 1,0 t

Condition: excellent (used), Year of construction: 2004, winch inkl. lifting capacity max. 2t. auf 2,7 Meter Chodpfeq N E U Ajx Aptsb lifting capacity max. 1 Tonne auf 5,3 Mete Number of working hours 270 h electrical ja

Condition: new, total length: 2,910 mm, Year of construction: 2025, load capacity: 2,500 kg, - Reifen: Solideal, Vollgummi grau, Typ Magnum - Reifengröße: vorne 18x7-8, hinten 15x4,5-8 - Radstand: 1635 mm - Bodenfreiheit Mitte: 70 Csdpfx Aoxpx Rwoptjhb - Proportional ausfahrbarer Ausleger - Vorderachse Antrieb mit gegenläufiger Bewegung - Mobile Kopf ( -70°/-35°/0°/+10°) - Struktur für Windflaschen und Haken an Bord - USB- Anschluss - Maximale Tragkraft 2500kg - Vorderradantrieb Nr. 2 Elektromotor AC 2 kW 24V. Isolationsklasse H - Abnehmbare Kontergewichte Kg. 750 - Batterie 24 V - 420 Ah 8 Arbeitsstunden - Antriebsräder: Vorne: Nr.2 superelastich 18x7-8” Hinten: Nr.2 superelastich 15x4 1/2-8” - Lenkung: über die Hinterachse Lenkwinkel -90°/+90° - LMI - Elektronische Lastbegrenzung - Automatisches Bremssystem an allen Rädern - Auslegerwinkel +65°/-15° - Elektromotor 3 kW - 24 V AC, Isolationsklasse - Hergestellt aus vorgefertigten und verschweißten Stahlplatten - Gemeinschaftsrichtlinien 2006/42/CE- 2000/14/CE -2014/30 UE 2014/35/UE - D.Lgs 262/2002 und nachfolgende Änderungen

Condition: used, Year of construction: 2004, fuel type: gas, weight max. in kg 2500 kg stroke 3050 mm fork length 1200 mm load centre 500 mm turning radius 2444 mm driving speed 22 km/h Cedpor Dg H Eefx Aptohb guage width vorne 1008 mm guage width hinten 932 mm weight of the machine ca. 3,64 t dimensions of the machine ca. 3,8 x 1,25 x 2,25 m

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 230 h, Basic data: Maximum lifting height on the rope: 8.8 m. Maximum lifting capacity: 2.9 t. Dimensions: 2.69 x 0.6 x 1.59 m. 360-degree boom rotation endlessly. 9.6 KW diesel engine. Additional 4-phase electric motor 400 V 3.7 kW Winch: 59.47 m. Dimensions on unfolded legs: max. 3.93 m x 3.88 m. Crane net weight: 2,090 kg. Sound signal informing about overload. Glasslift is a distributor of BG LIFT and UNIC mini cranes, SCHMALZ and RIGHETTI suction cups, SMARTLIFT manipulators, PAUS roofing cranes and CELA spyder basket lifts. We also belong to the GGR GROUP and have introduced our own series of GLW transport trolleys. Thanks to our wide range of devices, we select equipment adapted to the specifics of the work, thus offering machines that meet the customer's needs. At Glasslift, we not only carry out projects, but also provide tools for their effective implementation. In addition to sales, we also rent the above equipment in the short or long term. Glasslift is a professional team of operators specializing in comprehensive glass assembly, steel handling and handling of structural elements. Our team of experienced specialists knows their area of competence perfectly, is highly qualified, and each of our operators is fully committed to the implementation of the entrusted projects. We have the necessary competences, technical knowledge and appropriate substantive preparation, which means that you can fully trust us. Our skills are supported by positive opinions, references and publications about us, which proves our reliability and professionalism. Work with the best to ensure comprehensive and effective project implementation. Chodpfjwf Sfiox Apteb For sale USED Japanese mini crane UNIC URW-295 It is perfect for window joinery installation. It is characterized by high durability, good adaptation to difficult conditions and compact dimensions. This is a model in perfect condition - operated only by our operators. The crane has current UDT tests valid until April 2025

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, table length: 4,000 mm, table width: 2,000 mm, spindle speed (max.): 22,000 rpm, torque: 128 Nm, spindle nose: 63, CNC Heidenhain iTNC 530 S.P. Cjdszb Evlepfx Aptjhb WORKING AREA Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE Dimensions: mm 4.000 x 2.000 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to X-axis movement. AXIS CHARACTERISTICS Axis feed rate: mm/min 50.000 Acceleration: m/s² 4 WORKING AREA (CLEARANCES) Maximum horizontal clearance: mm 3.200 Maximum vertical clearance under crossbeam: mm 1.926 Height of worktable from floor: mm 330 CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. B-axis rotation range: ± 185° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Tool interface: HSK-A63 DIN 69893 The head is supplied complete with a cradle for handling and storage. The cradle is used outside the working area and therefore does not reduce the machine’s actual working capacity. CHAIN TOOL MAGAZINE – 30 POSITIONS (HSK) 30-position automatic chain tool changer located at the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter (adjacent pockets occupied): mm 90 Max tool length: mm 300 Max tool weight: kg 10 MEASURING SCALE PRESSURIZATION Pneumatic system complete with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL LUBRICATION/COOLING Mist lubrication system. The mist is generated by mixing air and oil and is controlled via M-function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and provides cooling. Highly effective for improving surface finish quality. EXTERNAL TOOL COOLING Coolant distribution system controlled by the CNC, with nozzles positioned on the flange around the spindle. Complete with a tank (1,200-liter capacity) for coolant collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS Maximum installed power: kW 150 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • No. 2 chip conveyors positioned on both sides of the worktable • User and maintenance manual and CE declaration of conformity

Condition: ready for operation (used), Year of construction: 2018, Max. profile length for 3 side machining: 7600mm, Y axis: 845mm, Z axis: 620mm, max. travel speed X axis: 63m/min, max. travel speed Y axis: 60m/min, max. travel speed Z axis: 60m/min, swivel range A axis: −90°, 0°, +90°, max. spindle speed: 24,000/min, spindle power: 11kW S1, machining direction: top/front/rear/left/right, positioning accuracy: 0.1mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120mm, saw blade diameter: 180mm, software: eluCam, connected load: 30kVA, compressed air connection: 7bar, compressed air consumption: approx. 180l/min, length: 10,775mm, width: 3430mm, height: 2950mm, weight: 4.9t, operating hours reading: 1550h, standby: 6300h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2 layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for reading orders/machining operations and documentation. Was serviced regularly, an on-site inspection is possible. Cedpfx Aszbb Rrsptjhb