Diesel Forklift

Kalmar DCG 120-12 - COMPLETELY OVERHAULED !!!

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers Ffsdpfx Agjwvqklo Rjt • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 6,287 h, load capacity: 12,000 kg, lifting height: 7,500 mm, free lift: 2,320 mm, fuel type: diesel, mast type: triplex, construction height: 4,150 mm, power: 142 kW (193.07 HP), fork length: 2,400 mm, drive type: Diesel, Heavy-duty forklift - diesel Load centre: 1200 mm Mast type: Triplex Transmission: Hydrostatic Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Superelastic Front tyres condition: New Rear tyres type: Superelastic Rear tyres condition: New Fjdpewblw Rsfx Ag Rjft Sideshift, fork positioner, Forks 2400 mm - NEW!! 3rd valve, 4th valve, rear work lights, front work lights, heater, road approval (StVZO), full cab, air conditioning, full free lift, CE certificate, LED,

Condition: refurbished (used), 150 m³ / 150,000 l extinguishing water tank according to DIN 14230 Tank volume: 150,000 liters / 150 m³ length: approx. 22.500 mm diameter: approx. 3.000 mm Weight: approx. 32,000 kg Material: steel material S 235 JRG 2 Underground tank for underground storage, single or double walled, suitable for walkable and drivable areas (load class SLW 30) with 1 dome (outer diameter 720 mm) with blind cover, seal and screws. New or used immediately available! The tank is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The tank complies with the regulations of DIN 14230 (underground extinguishing water tank): Fsdjhh St Ijpfx Ag Reft - Extinguishing water suction connection according to DIN 14244 with a mounted fire department coupling /fixed coupling A according to DIN 14319 in the design form B without gauge connection - Venting flange connection in NWN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground - Outside provided with a bitumen coating for protection - On request we can provide the tank with a full interior coating on a bitumen basis or epoxy resin interior coating (against corrosion) - It is also possible to line the tank with a with a plastic inner cover A cost-effective delivery with our own truck is possible. Just tell us the place of delivery, you will immediately receive the exact freight costs. An inspection is possible at any time after prior appointment.

Condition: good (used), machine/vehicle number: 2832, Year of construction: 2023, load capacity: 25,000 kg, lifting height: 3,920 mm, mast type: duplex, fork carriage width: 250 mm, fork length: 2,400 mm, total length: 7,005 mm, total width: 3,000 mm, operation weight: 33,800 kg, additional equipment features: Front mud guards, Rear mud guards, Equipment: lighting, Kalmar DCG250-12 from Uniktruck Ffsdpfx Asquwnljg Rjt

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 6,263 h, load capacity: 12,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,800 mm, fork length: 2,400 mm, drive type: Diesel, Diesel forklift Load center: 600 Mast type: Duplex Technical condition: good Fsdpou Ac I Uefx Ag Rsft Sideshift, fork positioner,

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 13,205 h, load capacity: 12,000 kg, lifting height: 5,500 mm, free lift: 2,750 mm, fuel type: diesel, mast type: duplex, construction height: 4,265 mm, fork carriage width: 2,500 mm, fork length: 1,800 mm, empty load weight: 20,840 kg, total length: 4,650 mm, drive type: Diesel, construction width: 2,600 mm, Heavy-duty forklift - diesel Load center: 600 Fork width: 250 mm Fork thickness: 75 mm Ffjdpfeu Txgljx Ag Ret Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Superelastic Front tire size: 12.00-20 Rear tire type: Superelastic Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-purchase and financing on favorable terms are always possible for us. We are also happy to buy your used equipment outright, even if you do not purchase a machine from us. Our owner, Mr. Peter Sawitzki, will be happy to provide detailed advice regarding this DCE 120-6. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons. We are also happy to put your vehicle on consignment sale at our premises. Sideshift, fork positioner, heater, full cabin, full free lift,

Condition: excellent (used), Weinig Profimat 23 four-sided planer Working width 230mm Working height 120mm Number of spindles 5 Fsdpfxovyr Hke Ag Rjft Spindle arrangement: Bottom 4kw Right Left 11kw Top 11kw Bottom 11kw Pneumatic material clamps Adjustable feed speed 5-22m/min Entry table length 2470mm Feed motor with a power of 4kw CE certificate Diameter of exhausts 5x140mm Machine dimensions 400x150x165cmH Weight 2300kg

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 524 h, load capacity: 4,000 kg, lifting height: 5,865 mm, free lift: 1,500 mm, fuel type: diesel, mast type: triplex, drive type: Diesel, Diesel Forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Super elastic Front tire condition: 60 - 80% Rear tire type: Super elastic Ffsdpfexl H Naex Ag Rjt Rear tire condition: 60 - 80% Description: In addition to this forklift model, we have approximately 120 other forklifts of all weight classes in stock at our warehouse in Meschede-Calle. Visit our homepage - rf-stapler. Leasing & financing at attractive conditions are always possible. We are also happy to purchase your used equipment outright, even if you don’t buy a vehicle from us. Our forklift master workshop specializes in repair, service, refurbishment, and overhaul of your forklift. We are also happy to offer your vehicle for sale at our facility. Side shifter, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heater, full cabin, Full cabin, heater.