Band saw

Kaltenbach KBS 620 DG

Year of construction: 2002, condition: not inspected (used), Robot Dodpfx Aegu U Itep Djwc no control panel + connection cables Used, untested robot. No technical documentation available. Not tested.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 8,995 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, controller manufacturer: Heidenhain, controller model: iTNC530 (HSCI), workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 4,500 mm, total width: 4,500 mm, table width: 65 mm, table length: 650 mm, table load: 600 kg, rotary table diameter: 650 mm, overall weight: 10,000 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 8,995 h, coolant supply: 40 bar, spindle motor power: 15,000 W, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The HERMLE C 400 U is a high-quality 5-axis CNC machining center, designed for precise and efficient machining. With a working area of 850 × 700 × 500 mm and a Ø650 mm swiveling/rotating table, this machine offers ample space for both complex and larger workpieces. The machine is installed and operational at our facility and can therefore be inspected while running! Additional options & accessories: - Chip conveyor - 40 bar internal cooling (IKZ) - Band filter system incl. 2 new rolls of filter paper. - BLUM LaserControl NT measuring system for tools. - Heidenhain TS 460 3D probe Dwedjz Nluuepfx Ap Djc - Electronic handwheel - Tool cabinet incl. approx. 100 pcs. HSK-A63 tool holders, collets and accessories. - 2 pcs. All-Matic machine clamp - Heidenhain reference pin - Manual cabinet roof - Original HERMLE + Heidenhain documentation. Weight & dimensions: approx. 10,000 kg approx. 4.5 x 4.5 x 3 m

Condition: excellent (used), Year of construction: 2006, • Configuration: 3 linear axes (X/Y/Z) + B-axis tilting head Dwodpfx Apjy Skmrj Doc • Travels (X/Y/Z): 2,500 / 920 / 820 mm • Table: 3.100 × 900 mm · max load 3.000 kg • Spindle: 20–18.000 rpm · HSK-A63 · 35/25 kW • Rapids: X 100 m/min · Y/Z 60 m/min • Tool magazine: 120 tools • Control: HEIDENHAIN iTNC 530 Brand new Spindle installed as end of April 2026

Year of construction: 2008, condition: ready for operation (used), X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible. Dwsdpfeza E S Dox Ap Dec

Condition: excellent (used), Year of construction: 2012, Control: Fanuc 0i-TD Equipment: - various tool holders - various driven tools - C-axis, driven tools Max. turning diameter: Ø 500 mm Max. turning length: 600 mm Bar capacity: Ø 75.5 mm Spindle speed: 3500 rpm Spindle nose: A2 - 8 Machine weight: 6,700 kg Djdpjy Dqb Tofx Ap Dewc

Condition: good (used), Year of construction: 1970, functionality: fully functional, Single Column Vertical Turning Lathe | Froriep DS 14 NC The machine was overhauled in 2009, recently cleaned, and is in good condition. - Table diameter: 1,400 mm - Swing diameter: 1,600 mm - Turning height: 1,500 mm - Siemens control type 840 D Dsdpfx Apoyft S Ao Djwc - Automatic tool changer - Workpiece weight: 6,500 kg - Vertical slide travel: 1,000 mm - Spindle speed: 10–315 rpm - Feed rate: 3,600 mm/min Inspection is possible at any time by prior arrangement. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Froriep | DS14 | DS14NC

Condition: used, Technical details: turning diameter over bed: 3800 mm turning diameter over slide rest: 3200 mm turning length: 12000 mm faceplate turning speed range -stepless-: 2 - 200 U/min max. workpiece weight: 90.000 kg bed width: 4000 mm 2 steadies * Dwodpfx Aox Ngzyep Dec

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling Dwjdpfxeuz If Nj Ap Doc - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: new, pressure: 600bending length: 6050column width: 5100daylight: 680stroke lenght (max.): 455column throat depth: 450messurements (LxWxH): 7100x3275x3910weight approx.: 50.2004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 45Standard Equipment:KK Kletzer Europa We have developed a high-quality model specifically for the European market:The CNC press brake by KK Industries, made in Turkey. Model: KK Kletzer EUROPA XL The powerful EUROPA XL press brake stands out for its high precision, accuracy, and versatile offers a very large open height, resulting in a long cylinder stroke, and an extra-large throat depth to provide maximum flexibility during operations. We focus on delivering quality—reflected also in the control system:As standard, the machine comes equipped with the ESA S640 2D graphic controller. Additionally, the KKI EUROPA XL is equipped with CNC-controlled Y1, Y2, X, and R axes via the wning is also included and fully CNC-controlled through the same ESA S640. When it comes to tooling, we make no machine is fitted with premium top tools and dies from EUROSTAMP Italy. Naturally, a machine is only as good as the service behind t’s why we rely on highly qualified staff with many years of experience in CNC sheet metal processing. Technical Highlights: Dedpod Ehh Refx Ap Dswc CNC axes: Y1, Y2, X, and R Controller: ESA S640 (2D graphical interface) Backgauge with double linear guides and ballscrews Motorized CNC-controlled crowning system Heavy-duty height adjustment with handwheel(from 175 tons: on linear guides) Laser safety system on the upper beam CE-compliant safety equipment Various options available Optional Controllers: ESA S640 – 15” 2D Touchscreen: ¤ 4,520.00 ESA 675 W – 21” 3D Touchscreen (Windows-based): ¤ 6,485.00 DELEM DA-66T – 17” 2D Touchscreen (Windows-based): ¤ 10,165.00 DELEM DA-69T – 17” 3D Touchscreen (Windows-based): ¤ 16,350.00

Condition: good (used), Year of construction: 2005, functionality: fully functional, Maho DMU 50, Year of manufacture 2005, Control system Siemens 840 D Powerline Shop Mill, Travel range X/Y/Z 500/450/400 mm, 2-axis NC swivel/rotary table Ø 630 x 500 mm, Max. table load 200 kg, Dwjdpfx Apszxm Dws Dsc Swivel range -5° / +110°, Digital drives, Spindle speed up to 10,000 rpm, SK 40, Direct linear scales X/Y/Z, 30-fold coolant, Additional cabinet door on the right, Operating mode 4, Infrared measuring probe Heidenhain TS 641, Electric handwheel, MDE interface, Additional V24 interface on the control cabinet, Previous application: production of samples and prototypes.