Säge-Bohranlage
Kaltenbach KDXS 1215 - HDM 1432

Name: Kaltenbach KDXS 1215 - HDM 1432
Brand: Kaltenbach
Availability: InStock

Year of construction

2009

Condition

Used

Location

Köln

Säge-Bohranlage Kaltenbach KDXS 1215 - HDM 1432

Machine data

Machine type:: Säge-Bohranlage

Manufacturer:: Kaltenbach

Model:: KDXS 1215 - HDM 1432

Machine number:: 0301-230036

Year of construction:: 2009

Condition:: used

Price & Location

Location:: Köln, Deutschland

Call

Details about the offer

Listing ID:: A15168955

Reference number:: 0301-230036

Update:: 20.05.2024

Description

Kaltenbach drill saw system as a combination for use in light to heavy steel construction.
Nlsdpfx Alerr Sq Njhsc
With this Kaltenbach system, steel profiles can be drilled, center-punched and sawn to length in a single operation. Rolled profiles such as double T-steel, T-steel, U-steel, angle steel, hollow profiles and flat steel are processed here.
The Kaltenbach drilling unit has an automatic tool changing device on three drilling spindles for five tool sizes each. The tools are positioned with high precision using ball screws and servomotors.

The entire system is equipped with a length measuring device.

Technical information KDXS 1215 drilling machine:
- Working area min. 80 x 65 x 10 mm
- Working area max. 1200 x 450 mm
- 3 drilling units (vertical Y-axis, horizontal Z- and W-axis) each 11.0 kW frequency-controlled: 33.0 kW
- Automatic tool changer (3x5)
- Frequency-controlled drive power 78 kW
- Working height 640 mm
- Machine dimensions 6100 x 1300 x 3730 mm (LxWxH)
- CNC control with Profiline 3 software

Kaltenbach HDM 1432 High-performance circular saw as vertical saw with swivel bearing for high sawing performance of medium and heavy steel profiles, working area at 90° saw cut: 1200 x 450 mm, mitre adjustment for mitre cuts of -45°/90°/+35°, this circular saw system is equipped with a segment saw blade diameter 1430 mm. High cutting performance thanks to powerful drive
NC-controlled cutting angle adjustment
Feed via ball screw for ideal cutting results and short idle times

Seller

Registered since: 2014

19 listings online

Call

Send inquiry

Telephone & Fax

+49 221 9... show

+49 221 8... show

Fax:

These listings may also fit your interest.

Listing

Eccentric Press - Single Column WEINGARTEN XRR III sp

Schmölln

6,625 km

Eccentric Press - Single Column
WEINGARTENXRR III sp

Call

Year of construction: 1965, condition: used, pressure 150 t throat 550 mm stroke 10 - 140 mm table surface area 1180 x 980 mm no. of strokes 40 Hub/min dayligth 500 mm ram surface 1040 x 800 mm ram adjustment 70 - 150 mm tool shank hole (depth x diameter) 435 x 55 mm required power 15 kW weight of the machine ca. 12 t dimensions of the machine ca. 3 x 1,7 x 3 m - with additional brake - slide weight compensation - motorized slide adjustment - central grease lubrication (manual) - table mounting plate - safe for manual inlay work Nedpfjcubatex Alhslc

See details

Listing

Screw manufacturing machine Hilgeland ME2 VM

Lüdenscheid

6,959 km

Screw manufacturing machine
HilgelandME2 VM

Call

Listing

Automatic circular saw KASTO GKS 400 AU/1200 CNC

Wiesbaden

6,914 km

Automatic circular saw
KASTOGKS 400 AU/1200 CNC

Call

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min Nedpfx Ajz N Amolholc cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

See details

Listing

Band Saw - Automatic - Horizontal KASTO HBA 520 AU

Bühl

6,917 km

Band Saw - Automatic - Horizontal
KASTOHBA 520 AU

Call

Condition: used, Year of construction: 1994, cutting diameter 520 mm saw band length 7239 mm cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm feed length: multiple 4500 mm min. cut-off length 6 mm length of rest piece min/max 10 / 100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm sawing motor 5,5 kW Nodpfxewm Rm Ij Alhslc total power requirement 10,0 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant

See details

Listing

Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Wittmann Battenfeld Eco Power 110/130 Unilog B6P

Trenčianske Stankovce

6,198 km

Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016)
Wittmann BattenfeldEco Power 110/130 Unilog B6P

Call

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Screw diameter: 22 mm Nsdou Eki Sopfx Alhjlc Shot volume: 41 cm3 Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Drive: Electric

See details

Listing

Mamer

7,070 km

Vertical lathe
SCHIESS40 DS 350

Call

Condition: good (used), functionality: fully functional, Original CNC (not a retrofit from conventional to CNC) Control: Siemens 8-M Faceplate diameter: 3500 mm Max. turning diameter: 4000 mm Njdpexyh Hvjfx Alhjlc Max. turning height: 2500 mm Vertical stroke of ram: 1600 mm Horizontal stroke of ram: 2200 mm Ram cross-section: 250 x 210 mm Min. internal diameter: 360 mm Vertical travel of cross-slide: 2000 mm/min Chuck motor power: 71 kW Chuck speed: up to 90 rpm (2-speed gearbox) Table load capacity: 40 tons Feed rate: 1000 mm/min Rapid traverse: 6000 mm/min

See details

Listing

Flat die thread rolling machine EWM GW62

Wiefelstede

6,930 km

Flat die thread rolling machine
EWMGW62

€4,500

Fixed price plus VAT

Call

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation Njdpfsi Eg Nksx Alholc -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

See details

Listing

Lead/traction spindle lathe HEYLIGENSTAEDT 355 Ea/3000

Wiesbaden

6,914 km

Lead/traction spindle lathe
HEYLIGENSTAEDT355 Ea/3000

Call

Condition: ready for operation (used), Year of construction: 1969, Centre height: 355 mm Centre distance: 3000 mm Max. swing diameter over bed/gap/cross slide: 715/790/520 mm Spindle bore: 86 mm Spindle mount according to DIN 55027: Size 11 Quill taper of tailstock: MK 5 21 spindle speeds: 5.6 - 560 rpm Nljdexpuu Eepfx Alhjc 42 feeds longitudinal/cross: 0.09 - 5.6/0.045 - 2.8 mm 22 Whitworth threads: 2 - 28 TPI 28 metric thread pitches: 1 - 14 mm 27 module thread pitches: 0.25 - 3.5 module 32 module threads: 4 - 56 module 32 diametral pitch threads: 8 - 112 DP Drive motor, pole-changeable: 380 V, 7/11 kW Weight approx.: 7 t Space requirement approx.: 6000 x 2300 mm

See details

Listing

Goldenstedt

6,906 km

Center Lathe
COLCHESTERMastiff 1400

Call

Condition: used, greates pass round over bed 540 mm swing diameter over face slide 370 mm centre distance 3000 mm centre height 270 mm turning dia. in gap 815 mm Nlsdpsxnqzxofx Alhoc bed width 344 mm spindle bore 88 mm spindle diameter in front bearing 133 mm spindle taper 11" D1 Camlock turning speed range 18-1400 U/min turning speeds 16 3-jaw chuck Röhm Ø 315 longitudinal feeds: 0,06-1,0 mm face feeds 0,03-0,5 mm metric threading 0,4-14 mm inch threading 2-72 G/1" thread - module 0,3-3,5 mm thread - DP 8-60 Pitch tailstock quill diameter 75 mm quill stroke 230 mm taper of tail spindle MK 5 slide valve travel 280 mm upper head travel 150 mm Overall size ca. 4700 x 1100 x 1400 mm weight ca. 3200 kg power capacity 9,4 kW Accessories: 2-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm incl. hard base jaws and hard attachment jaws Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Switchable lathe chuck guard 2 steady rests Chip guard Coolant device Work light Guideways in good condition without scratches, not worn Machine is in good overall condition with signs of wear commensurate with age. Includes operating instructions Translated with (free version)

See details

Listing

Wellingborough

7,524 km

CNC SAWING LINE
FICEP603 LBH

Call

Year of construction: 2007, condition: excellent (used), 603 LBH Technical Description Main Technical Specifications • Minimum sawing capacity at 90° min.mm 60 x 10 max.mm 610 x 310 • Sawing capacity at 45° mm 400 x 310 Nodpfx Alol Si Uujholc • Sawing capacity at 60° (available on two flanges only with relevant option) mm 250 x 250 • Mitering angles +45° / -60° • Toothed band size mm 34 x 1.1 • Toothed band speed m/min. 78 • Band motor power kW 4 • Working level height mm 850

See details

Advertise here